Complete 5 speed swap

[mustang50lx]

I have a complete 5 speed swap for a Fox body with many new parts. You will get a used T-5, a Quick time non SFI steel bell housing and block plate, A Ram Powergrip clutch, A Ram flywheel, A Steeda Tri-Ax shifter, Steeda Clutch quadrant, Steeda clutch cable, Steeda firewall adjuster, Clutch and brake pedals, steel driveshaft, and the wiring jumper for the 5 speed stuff. The Bellhousing, clutch, flywhhel, and most of the Steeda stuff has around 20 passes on it and about 200 street miles. It is all still in the car. You can drive it before I remove it. The only thing you will need to buy seperate is a pilot bearing. $1500.00 724-516-1605

[97LaserRed]

I have a complete 5 speed swap for a Fox body with many new parts. You will get a used T-5, a Quick time non SFI steel bell housing and block plate, A Ram Powergrip clutch, A Ram flywheel, A Steeda Tri-Ax shifter, Steeda Clutch quadrant, Steeda clutch cable, Steeda firewall adjuster, Clutch and brake pedals, steel driveshaft, and the wiring jumper for the 5 speed stuff. The Bellhousing, clutch, flywhhel, and most of the Steeda stuff has around 20 passes on it and about 200 street miles. It is all still in the car. You can drive it before I remove it. The only thing you will need to buy seperate is a pilot bearing. $1500.00 724-516-1605

do you have just the clutch dust cover? would you sell just that?

[White5.0]

do you have the harness that goes between the 2 prong sensor and the car's wiring harness? i think thats the one i need....if so, would ya sell it separate?

[mustang50lx]

I don't think I have that part. I will have to check. You don't use it with the Quick time bell housing.

[How Much?]

do you have just the clutch dust cover? would you sell just that?

I have that, 10 bucks

[How Much?]

do you have the harness that goes between the 2 prong sensor and the car's wiring harness? i think thats the one i need....if so, would ya sell it separate?

Have that also, 10 bucks

[How Much?]

I have a complete 5 speed swap for a Fox body with many new parts. You will get a used T-5, a Quick time non SFI steel bell housing and block plate, A Ram Powergrip clutch, A Ram flywheel, A Steeda Tri-Ax shifter, Steeda Clutch quadrant, Steeda clutch cable, Steeda firewall adjuster, Clutch and brake pedals, steel driveshaft, and the wiring jumper for the 5 speed stuff. The Bellhousing, clutch, flywhhel, and most of the Steeda stuff has around 20 passes on it and about 200 street miles. It is all still in the car. You can drive it before I remove it. The only thing you will need to buy seperate is a pilot bearing. $1500.00 724-516-1605

Sorry, didnt me to Highjack ur Thread!! Bump On good Deal

[mustang50lx]

do you have the harness that goes between the 2 prong sensor and the car's wiring harness? i think thats the one i need....if so, would ya sell it separate?

That has to stay with the setup. Sorry. I am sure you saw that How Much? has one for you.

[mustang50lx]

I may split this up also. Make offers on what you need.

[turbo83coupe]

I am interested in the block plate, clutch cable, firewall adjuster, and maybe the clutch?

[fordandmopar21]

Would you sell the steeda tri ax? If so ill take it.

[mustang50lx]

I am interested in the block plate, clutch cable, firewall adjuster, and maybe the clutch?

The block plate goes with the bell housing. The rest will be for sale. I am going to want $50.00 for the cable, firewall adjuster, and Quadrant. (I bought them all as a set.) I want $150.00 for the clutch, pressure plate, and throw out bearing. (Cost $350.00 at Summit.)

The Bell housing and one of the transmissions have to be sold before I am taking the car apart. I don't want to sell small stuff and end up with a non running car I can't afford to fix.

[mustang50lx]

Would you sell the steeda tri ax? If so ill take it.

I will sell the Tri Ax after I sell the Trans and bell housing. $100.00

The Bell housing and one of the transmissions have to be sold before I am taking the car apart. I don't want to sell small stuff and end up with a non running car I can't afford to fix.

[mustang50lx]

This setup will have miles and 1/4 mile passes added to the total until the stuff sells. I'd rather be racing with an automatic, but I'll race with the stick until I can afford it. It's not as consistant as an auto, but a bad day at the track beats a good day of yardwork every time. (Unless the bad day involves broken sh*t or a crash.):)

[casper gt]

broken sh*t, not you.

[mustang50lx]

Bump Lower price. I am going to keep the pedals. Make offers on parts if you want. The worst I can do is say no. I want to sell this stuff to get my C4.

I have a 5 speed parts for a Fox body with many new parts. You will get a used T-5, a Quick time non SFI steel bell housing and block plate, A Ram Powergrip clutch, A Ram flywheel, A Steeda Tri-Ax shifter, Steeda Clutch quadrant, Steeda clutch cable, and Steeda firewall adjuster. It is all still in the car. You can drive it before I remove it. $1200.00 / offer for all or I will part it. 724-516-1605

[mustang50lx]

Bump Lower price. I am going to keep the pedals. Make offers on parts if you want. The worst I can do is say no. I want to sell this stuff to get my C4.

I have a 5 speed parts for a Fox body with many new parts. You will get a used T-5, a Quick time non SFI steel bell housing and block plate, A Ram Powergrip clutch, A Ram flywheel, A Steeda Tri-Ax shifter, Steeda Clutch quadrant, Steeda clutch cable, and Steeda firewall adjuster. It is all still in the car. You can drive it before I remove it. $1200.00 / offer for all or I will part it. 724-516-1605

Even lower price. $750.00. I need $ for my C4. The transmission can not be powershifted into 3rd. It shifts fine on the street. You can drive it before you buy it for a couple more days.