1990 GT part out with aftermarket list

[coondogg]

Well, since I sold my headers and FMS drive shaft, the part out has begun.

Upgrades that I have are:

Front brakes (including calipers) (under 5000 mi),
Rear brakes (including springs and axle seals) (0-miles),
130-amp G2 PA automotive alternator,
Water pump (0-miles),
Double roller timing chain,
3-row brass radiator,
180-degree thermostat,
MAC fender well cold air,
Replaced mass air sensor,
PRO 5.0 shifter,
Flowmaster “American-Thunder” cat-back exhaust,
Mac “off road” H-pipe (0-miles),
New “take off” shocks and struts (0-miles),
Head lights and turns,
Brand new battery (0-miles),
FMS 5 lug rotors and axels,
17” wheels,
1.25 aluminum wheel spacers (move wheels out “just right”) (0-miles),
3.55 gears,
Trac-loc rebuilt with new clutches (0-miles),
Centerforce Clutch (bought used with under 10k)
Rear main seal, pilot and throw out bearing,
Poly motor and tranny mounts (0-miles),
Ball joints (0-miles),
Poly control arm bushings (0-miles),
Front control arms, spindles, and dust shields blasted and painted.
Manual Chrome Rack and pinion (0-miles),
Poly rack bushings (0-miles),
Poly end links (0-miles),
Inner and outer tie rods (0-miles),
Eibach lowering springs with poly isolators,
Aluminum caster/camber plates (0-miles),
Sub-frame connectors (not installed yet) (0-miles),
PMGR mini starter (0-miles),
Pony floor mats (0-miles),
Aftermarket (forgot brand) square tube U&L rear control arms.

Send me offers as I'm going to be fair with pricing. If I didn't loose my job in March, this would be much harder for me...

Vid: [ame="http://www.youtube.com/watch?v=NDNsAnBznO4"]YouTube- MVI 9650[/ame]

[wick]

Poly control arm bushings for front or rear? How much? Location?

[wick]

Head lights new or used?

[coondogg]

The front bushings are already installed. The rears are not...

I'd have to sell the front control arms (repainted) and new ball joints with them as a package.

I'm in Overbrook.

[coondogg]

Headlights are used for about a year. I bought them new from LMM back in 00? the car has been in the garage since 01...

[wick]

So you have rear bushings then? Thats what I need. The head lights stock type? All six pieces.

[wick]

Can you shoot me a picture or two of the lights to robob93@hotmail.com If they are almost perfect, I will take them. Providing they are the stock type replacements and the price is right.

You can send it to my phone if you like. (412)400-7100

[coondogg]

I just put a bunch of pics in the 1st post.

Headlights (all 6) and all the bushings that I still have in the box (more than just the rears) for $150?...

[Shorty429]

are you looking to part out any of the interior stuff?

[coondogg]

What you have in mind?

I also have a set of 86 gt tail lights (the lens and housings) too...

[Shorty429]

I need a dash pad, the pieces that run along the floor where the doors close, a shifter boot, an ac compressor, passenger power window switch, driver & passenger side power window switch bezzles, and i think that's it.

[fordandmopar21]

how much for the pro 5.0 shifter?

[coondogg]

I need a dash pad, the pieces that run along the floor where the doors close, a shifter boot, an ac compressor, passenger power window switch, driver & passenger side power window switch bezzles, and i think that's it.

You have a scarlett red interior?

how much for the pro 5.0 shifter?

It might be sold already, but something in the $125 range. By far the best mod ever...

[Shorty429]

If that's the same red that came in the 86's, then yes sir. I'm not sure if there is a difference?

[coondogg]

I think 84-86 is canyon red?

I dont know how the two compare though...

[Shorty429]

well. what color is the shifter boot, if you're interested in selling it. And also how much would you want for the step plates (i think that's what they're called) i'm sure they're not really far off and it'd be better than having nothing there for the time being.

[coondogg]

lol, $20 for the boot and plates...

[Shorty429]

where are you located?

[92306gt]

sent pm on the hatch

[coondogg]

where are you located?

Overbrook, just south of the Liberty Tubes off Route 51...