thin mount under 3-inch. Or will take a reverse(pusher)mount fan.
also looking for a rubber shifter (tunnel)cover.
thin mount under 3-inch. Or will take a reverse(pusher)mount fan.
also looking for a rubber shifter (tunnel)cover.
Last edited by went9s; 07-21-2009 at 11:47 PM.
1969 Camaro restomod/project
1967 camaro
2011 mustang procharged
93 reef blue notch blk/int
92 calypso notch blk/int
86 t-type
1972 chevelle project
Not only did I fail at building a fast mustang but I bought a yellow zo6 cause I couldn't get my little dick up.
Adam, just get a set of fans from a LS1 and wire them as a pusher setup mounted on the front side of the rad. I'm in the process of doing this on my Red car now. It looks tight, but should be able to be made fit.
the 10 rib novi2000 has no room with the huge alum.rad i put in
how much was the ls1 fans?
1969 Camaro restomod/project
1967 camaro
2011 mustang procharged
93 reef blue notch blk/int
92 calypso notch blk/int
86 t-type
1972 chevelle project
Not only did I fail at building a fast mustang but I bought a yellow zo6 cause I couldn't get my little dick up.
I got mine from Mater for like $125. They move more air than anything I have ever seen.
i think i have a taurus fan laying around if you're interested
2013 Mustang GT
1987 Mustang GT
1999 Contour SVT
I have a taurus fan its to thick. thanks though.
1969 Camaro restomod/project
1967 camaro
2011 mustang procharged
93 reef blue notch blk/int
92 calypso notch blk/int
86 t-type
1972 chevelle project
Not only did I fail at building a fast mustang but I bought a yellow zo6 cause I couldn't get my little dick up.
Could try a Mark VIII fan. Depth at center is prolly around 4". Highest factory CFM fan out there. Available at alot of junkyards for around $30 or less. Do you really want a Chebby part on your Ford? Do a search on CORRAL.
Originally Posted by luxurysportscar
Thats even thicker... I was going to get one at carlisle for 20.00. It was almost an inch thicker than the Taurus fan.
Rob
1 Monte SS. White.
Banned dates
11/27/08
4/25/11
3/28/12
12/1/12
There are more but that's all that was logged!!!
I need a fan that is less than 3 inchs. thanksluxurysportscar Could try a Mark VIII fan. Depth at center is prolly around 4". Highest factory CFM fan out there. Available at alot of junkyards for around $30 or less. Do you really want a Chebby part on your Ford? Do a search on CORRAL.
1969 Camaro restomod/project
1967 camaro
2011 mustang procharged
93 reef blue notch blk/int
92 calypso notch blk/int
86 t-type
1972 chevelle project
Not only did I fail at building a fast mustang but I bought a yellow zo6 cause I couldn't get my little dick up.
Posting Permissions
Reply With Quote
Bookmarks