Results 1 to 5 of 5

Thread: Need help with car options

  1. #1
    Senior Member scott5's Avatar
    Join Date
    Sep 2006
    Location
    NC
    Posts
    10,168

    Need help with car options

    I am building a new motor for a new car and i have the basis of it. Its going to be a 331 with boost(always wanted to build this "dream of mine" combo). Its def going into a sn95 car, and my original thought was to put it in a 94/95 gt or cobra car, but i have found that these cars even with a rolling chassis are still going for 2k plus and i have found a few 94-98 v6 cars that are in the same shape (body wise) with no rust go for 500 bucks just cause they have high miles and the fact that they are v6s. I have also found a few 96-98 gts for about 1k with blown motors or missing misc things. I was just wondering what kind of problems would i run into with the v6 and the 4.6 based gt's? I know the computer will probably be the biggest problem, but anything other than that? Am i looking over something? The more i thought about it, if i could land a high mileage v6 for 500 bucks i could drive it around (truck gets 10mpg) and start on the suspension build up on it and start getting the cage in it and other misc things that need to be done to whatever car i buy.

  2. #2
    far from a newb!!! INSANELY CRAZY's Avatar
    Join Date
    Aug 2006
    Location
    out in the woods
    Posts
    4,948
    i know on foxbody's when you convert 4bangers to v8 there is alot of stuff to change if you wanna do it right.

    rearend,fuellines,engine wiring,suspension.etc... just to name a few

    so i would think some of these would need changed to convert to a v8 from v6.
    ridin fast,hittin da hills,throwin some dirt

    2003 polaris predator 500

    (wanna ride,just pm me!!!)

  3. #3
    Big Daddy gmkillr's Avatar
    Join Date
    Aug 2006
    Location
    At the racetrack
    Posts
    4,193
    Why a 331?
    Unless you plan on racing in a cube limited class the only thing the 331 will get you is less h.p. and less t.q.....:)

    If your starting from scratch then go to a 351 block and build a 408 stroker.
    Corvette Z06

    Growing up.............Not everyone does it!


  4. #4
    TELL IT LIKE IT IS crazylou's Avatar
    Join Date
    Nov 2008
    Location
    ELIZABETH TWP.
    Posts
    885
    just went through this and wound up building a 408 stroker cost just bout the same more cubes. just picked it up yesterday and made 538hp-508tq...
    COREY...

    *04 Torch Red Cobra
    1 of 164 with med.graphite inserts

    Work done and Tuned by Rodeheaver's Hot Rod shop...

    471hp/489tq
    -------------------------------------------------------------------

    *1970 chevelle ss L-S5 454, 4 spd
    real deal not a clone have paperwork



  5. #5
    Senior Member scott5's Avatar
    Join Date
    Sep 2006
    Location
    NC
    Posts
    10,168
    Quote Originally Posted by gmkillr View Post
    Why a 331?
    Unless you plan on racing in a cube limited class the only thing the 331 will get you is less h.p. and less t.q.....:)

    If your starting from scratch then go to a 351 block and build a 408 stroker.
    Yea i am starting from scratch.. Its going to be more of a street car than a race car.. And im only going to put an s-trim on it thats why i was going with a 331 setup.. I was thinking a 408 but figured it would be overkill for a 60% street car and 40% race car.

Similar Threads

  1. Ranger options?
    By Darren in forum General Tech
    Replies: 2
    Last Post: 03-23-2014, 03:29 AM
  2. Look at options for new DD
    By SonofaBish in forum The Bar
    Replies: 24
    Last Post: 11-04-2012, 08:27 PM
  3. Reflective coating options
    By Killercanary in forum The Bar
    Replies: 5
    Last Post: 05-07-2007, 11:33 AM
  4. Cobra options
    By 87notch in forum Pictures & Videos
    Replies: 4
    Last Post: 03-19-2007, 12:30 AM
  5. 10/22 Stock Options
    By Viper_ed in forum The Bar
    Replies: 40
    Last Post: 12-22-2006, 03:34 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •