352 a4 block ---- 3500.00
diamond 8.5.1 pistons .060
eagle 4340 forged crank 3.4
eagle 4340 forged h beams 5.4
stainless o ringed
arp 1/2 head studs
afm b451 cam
ford racing hyd lifters
cloyes 9 way adj timing set
moroso 7qt pan pickup/dipstick etc
hpm motor mounts
scat sfi 157th flexplate
romac sfi balancer
arp hardware in the lower end
m68hv oil pump
ford racing h.d oil pump shaft
8000 miles runs great, going back to an all aluminum 400+ nitrous motor
will only ship if i only have to crate it and drop it off otherwise pickup local
vic jr 302 intake -- 150.00 shipped
afr 205 heads 58cc w/ afm springs/retainers/keepers 1400.00 w/ pushrods shipped
crane 1.6.1 7/16th rocker arms -- 125.00 shipped
crane hi6 dsr ignition trc and map sensor included -- 225.00 shipped
msd blaster 2 efi coil -- 25.00 shipped
msd billet mech dist 302 for vic jr intake -- 150.00 shipped
kooks 1 7/8 (8.2 deck) 3.5 collector 3inch wide pattern fit canfield/afr 205 and im sure others -- 400.00 shipped these are bolt on headers that do not require adapters
2 5/8 autometer super comp 30/30 vac/boost gauge 30.00 shipped
2 5/8 silver comp fuel press gauge 10-100 psi 30.00 shipped
csu 750 blow thru carb w/ brpv 1 month old --- 750.00 shipped
e.v o ringed bonnet ( with divider allready ground out ) -- 150.00 shipped
renegade(drivers side) novi 2000 -- 2200.00 shipped
8 inch crank pulley
3 inch blower pulley
dual tensioners
new belt
piping for blow thru carb or efi (have both)
mondo bov
vortech cog pulley kit w/ hpm blower brace -- 175.00 shipped
73 lower
30 upper
tensioner
belt
this stuff is new never used
pro-m 83mm mass air meter for s/c and 75lb injectors --- 125.00 shipped
please call 814-207-3299 or email ruthlessgsx@aol.com for questions , most of the stuff is in the car still but i can still get pics of most of it, you can also here it run over phone or in person.. i will be taking it apart asap. thanks
Reply With Quote
Bookmarks