Vid of my car dynoed @ Rodeheaver's

**94svtcobra** · 08-03-2009, 02:14 PM

[ame="http://www.youtube.com/watch?v=L4RLtYz0VY4"]YouTube- 1994 Mustang SVT Cobra dyno pull 261hp 311tq[/ame]

car made 234 hp and 256 tq on a Mustang Dyno

thanks again Tim for throwin it on last minute

**2001GTTT** · 08-03-2009, 04:02 PM

yea that was sick, definitely a fun day.

**94svtcobra** · 08-03-2009, 04:12 PM

makes me want more power tho, time for two of the big ones

**2001GTTT** · 08-03-2009, 04:13 PM

Originally Posted by 94svtcobra

makes me want more power tho, time for two of the big ones

lol. a t-66 turbo and mo-tek system exhaust?

**94svtcobra** · 08-03-2009, 04:17 PM

with nawzz, honestly If I can save the money, I really want that carbed 393 Tim and I talked about. used Tremecs are no where near as expensive as I thought they would be, If I can get one of those for around a grand or so, beef up the rear end for around a grand or less I think I could probably swing the drivetrain swap I need

**2001GTTT** · 08-03-2009, 04:19 PM

buy khris' fox. that would be sickening.

**94svtcobra** · 08-03-2009, 04:20 PM

I may, just have to see how much I can sell my tan interior for

**pop's stang** · 08-04-2009, 12:13 AM

Your car sounds GRRRRRRRREAT!! Wish mine sound that good.

**cwh19** · 08-04-2009, 01:00 AM

Originally Posted by pop's stang

Your car sounds GRRRRRRRREAT!! Wish mine sound that good.

Yea man your car does sound damn good

**Martin0660** · 08-03-2009, 06:14 PM

looks good Mike ... Maybe try taking 4 plug wires off ??

**gmkillr** · 08-03-2009, 07:57 PM

What are all of the mods to the car.

My 94 Cobra with:
bbk shorty headers
bbk offroad h-pipe
summit catback
pro-m 75
homemade cai
bbk 65mm tb
mac underdrive pulleys

Made 265 rwhp and 308 rwtq and this was with 100k on the entire longblock.
added some boost and a cam and made 505 rwhp and 467 rwtq

**cwh19** · 08-03-2009, 08:02 PM

Clark you need to get yours done now so you can see if you really beat him lol

**97LaserRed** · 08-03-2009, 08:42 PM

was that pull in 3rd gear?? sounded like you never shifted into 4th?

**1Badbird** · 08-04-2009, 12:28 AM

Sounded real good Mike, I wish I could've made it out. I had a very prosperous weekend though. The yard sale made quite a bit more than I thought! Will you be comming out again sometime?

**94svtcobra** · 08-04-2009, 12:28 AM

What are all of the mods to the car.

My 94 Cobra with:
bbk shorty headers
bbk offroad h-pipe
summit catback
pro-m 75
homemade cai
bbk 65mm tb
mac underdrive pulleys

Made 265 rwhp and 308 rwtq and this was with 100k on the entire longblock.
added some boost and a cam and made 505 rwhp and 467 rwtq

It has a bbk cai, 75mm throttle body, summit brand underdrives, mac long tubes, a Rodeheaver's custom exhaust from the headers back, aluminum driveshaft, msd distributer cap, ford racing plugs and wires. just basic bolt on stuff

was that pull in 3rd gear?? sounded like you never shifted into 4th?

I believe so, Tim was driving

Your car sounds GRRRRRRRREAT!! Wish mine sound that good.

thanks, Rodeheavers did a great job on the exhaust

**Rodeheaver's** · 08-04-2009, 09:40 AM

Originally Posted by 94svtcobra

It has a bbk cai, 75mm throttle body, summit brand underdrives, mac long tubes, a Rodeheaver's custom exhaust from the headers back, aluminum driveshaft, msd distributer cap, ford racing plugs and wires. just basic bolt on stuff

I believe so, Tim was driving

thanks, Rodeheavers did a great job on the exhaust

no, that was a 4th gear pull for sure..

**90TitaniumStang** · 08-14-2009, 07:56 AM

Originally Posted by 94svtcobra

It has a bbk cai, 75mm throttle body, summit brand underdrives, mac long tubes, a Rodeheaver's custom exhaust from the headers back, aluminum driveshaft, msd distributer cap, ford racing plugs and wires. just basic bolt on stuff

I believe so, Tim was driving

thanks, Rodeheavers did a great job on the exhaust

pull should be in 4th its the best 1 to 1 ratio to get true numbers

**94svtcobra** · 08-04-2009, 01:09 AM

thanks guys, just need to save up so i can start putting some real power to the wheels

**cwh19** · 08-04-2009, 01:11 AM

Originally Posted by 94svtcobra

thanks guys, just need to save up so i can start putting some real power to the wheels

What exactly? Blower style or like heads, cam, etc?

**94svtcobra** · 08-04-2009, 01:12 AM

Sounded real good Mike, I wish I could've made it out. I had a very prosperous weekend though. The yard sale made quite a bit more than I thought! Will you be comming out again sometime?

congrats on the yard sale Jay, ya I'm sure I'll be down again soon enough, once I get a real job (hopefully soon) where I can make some decent money, I'm planning on a new engine and drivetrain so I'll have the car down to Tim's quite a bit