first with cash gets the stuff..
1993 lx coupe orig 5.0/5spd "ROLLER"
converted to carb, could easily put back to efi.
red with mostly black and some gray interior
85k orig miles /orig paint/body clean and clear title never in any accidents whatsoever
5 lug converted
upr tubular k member
upr tubular a arms
upr coil over's
eibach springs
upr caster/camber plates
lakewood 90/10 50/50 shocks and struts
upr dbl adjustable solid pro upper and lower control arms
upr spherical housing bushings
upr anit roll bar
wild rides upper/lower battle boxes welded in
8 point cage w/ drivers side swing out door bar welded in to frame were applicable
lakewood driveshaft loop
subframe connectors welded in
33 spline moser axles
33 spline moser spool "light"
c clip elim's
tfs rear girdle
3.73 motorsport gears
long studs
aeromotive a1000 pump&filter
-10an feed
-8an return
13204 fuel regulator
-6an lines for carb ( entire fuel system is there )
glenns sumped tank
recaro race seats
drivers side 5 pnt harness
custom carpeted rear seat delete
cervini 4 inch hood bolt on
cowl gauge concepts pod for on the cowl
2 5/8 fuel press gauge
2 5/8 oil press
2 5/8 water temp
2 5/8 trans temp
weld pro star 15x10 and 15 x3.5
skinny tires
325/50/15 bfg drag radials 70% tread
manual brake setup
15%tinted windows
moroso rear mount battery pan
moroso cut off switch
rear seats were deleted, car is inspected per pa and was a street car, all lights,signals,wipers,power windows, and such work as factory. ran a best of 5.82@121 with a 1.32 60ft the car works great, leaves straight, very minor dings, a few rust bubbles on rear deck lid by key hole, hood is primered , the overall paint is great and very shiny, 8/10 overall condition for being original. center console was removed and i customized it. im getting out of the game for awhile and do not want to look at the car sitting there in my garage. the car with a 410 windsor block weighed roughly 2700 w/o driver
5000.00 obo i need to move it cash talks
call 814-207-3299 or email ruthlessgsx@aol.com for pics ..
also have lots of other parts for sale..
kooks 1 7/8 x3.5 (8.2) deck -- 300.00 shipped
fluidyne aluminum radiator -- 200.00 shipped
csr (blue) electric water pump w/ march alternator brackets, and pulleys --- 300.00 shipped
romac 28oz sfi balancer --- 100.00 shipped
scat 28 oz sfi flex 157 th -- 50.00 shipped
eagle 4340 3.4 stroke crank forged, needs welded up and cut( easy fix not to bad) --- 150.00 shipped
eagle h beam forged rods (perfect shape)---250.00 shipped
diamond .060 -22cc dished pistons .927 pin 8.2 deck 8.5.1 w/58cc heads(perfect shape) -- 250.00 shipped
ford a4 race block, 1 cyl needs sleeved and re bored, it was .004-.006 out the rest are perfect at .060 -- 400.00 (pick up only)
arp 1/2 head studs-- 50.00 shipped
moroso 7qt oil pan (pick up/dipstick inc) -- 150.00 shipped
would make a package deal for the whole shortblock, was going to cost me 600-700 to put it back together. would sell from balancer to pan as listed for 1200.00 picked up , could have a 352 cid race motor fresh for 2000 or less ...
victor jr 302 carb intake --- 125.00 shipped
msd pro billet 302 distributor (mech advance) --- 150.00 shipped
jw 157 th zero balance flex for c4 -- 50.00 shipped
hpm solid motor mounts -- 50.00 shipped
ford motorsport tall polished valve covers --- 75.00 shipped
ford racing hyd roller lifters,spiders,dog bones -- 50.00 shipped
cloyes billet timing chain set 9 way adjustable (barely used) --- 25.00 shipped
msd blaster 2 tfi coil --- 25.00 shipped
m/t 28x10.50x15 slicks (65-70% tread) --- 150.00 picked up
pro m 83mm s/c meter for 75lb inj -- 125.00 shipped
paxton novi 2000 drivers side renegade blower setup -- 2000.00 shipped
7inch aluminum asp crank pulley
3.00 blower pulley
dual tensioners
gates belt
mondo polished bov
piping for a blow thru carb or i got the piping that was used for efi ( i converted to carb)
would take trades on 87-93 gt's 5 speed in good condition,(paint must be nice) close to stock, no major mods or ls1 cars, again close to stock.. would even put some cash up for the right deal..
number is up above, throw me some offers guys, i want to move stuff.. however dont be stupid with them either. thanks
p.s willing to deliver the roller within 2 hours of 16601, 500.00 non refund deposit prior... lots have seen the car and parts and can vouch for there condition.. also have a few you tube vids off the car as well, nothing has changed since then except the pro stars are on it now , and offcourse no motor or tranny .lol
[ame="http://www.youtube.com/watch?v=BRQtvYuOGF0"]YouTube- Ford Mustang stroker,331,347,393,408,410,NOS,Turbo,Burnout[/ame]
http://www.youtube.com/watch?v=5mQhIg38FK4&eurl=http://www.youtube.com/user/Sportwerks408
Reply With Quote
Bookmarks