novi 2000, fluidyne , pa s.c c4 , lots of stuff

[biggb]

decided to make a new thread with i have left to sale..

vic jr 302 intake -- 150.00 shipped

msd blaster 2 efi coil -- 25.00 shipped

renegade(drivers side) novi 2000 -- 1900.00 shipped
7 inch crank pulley
3 inch blower pulley
dual tensioners
new belt
piping for blow thru carb and efi (have both)
mondo bov

fluidyne 3 core aluminum radiator -- 175.00 shipped

flexalite electric syclone fan w/ shroud -- 150.00 shipped

jw zero bal 157th flex for c4 -- 40.00 shipped

pro-m 83mm mass air meter for calib for s/c ,75lb injectors --- 125.00
shipped

pa super comp c4 w/ brake --- 500 miles --- 2100 picked up
sfi aluminum blow proof bell
ptc 9inch converter 3600 w/ bal plates
derale aluminum thick trans cooler w/ built in electric fan
-6an braided cooler lines
b/m pro magnum pistol grip shifter
locking dipstick
pa block plate
tranny mount
scat 157th 28 oz sfi flex
nuts bolts etc everything needed for install

powermaster sbf hi torque mini starter --- 100.00 shipped

3inch dr gas x pipe/ 3inch spin tech mufflers dumped --- 250.00 shipped or 200.00 picked up
this is one peice from headers to the rear end it will need cut to be shipped, i will mark it so
it can be welded back up.. it has 3 bolt flanges to bolt to hooker super comps etc..

please call 814-207-3299 or email ruthlessgsx@aol.com for questions or pics
paypal verified ruthlessgsx@aol.com

[biggb]

novi 2000 has thick brackets, oil lines, nuts bolts etc, 100%complete ready to bolt on....

[yeahloh95]

b i'll be in touch i need some of this stuff, mainly the tranny

[90TitaniumStang]

pa super comp c4 w/ brake --- 500 miles --- 2100 picked up
sfi aluminum blow proof bell
ptc 9inch converter 3600 w/ bal plates
derale aluminum thick trans cooler w/ built in electric fan
-6an braided cooler lines
b/m pro magnum pistol grip shifter
locking dipstick
pa block plate
tranny mount
scat 157th 28 oz sfi flex
nuts bolts etc everything needed for install


how much are you looking to get out of just the trans
2100 new in summit

[Tony71502]

Do you have the larger brackets for the aluminum radiator? Is that MSD coil a direct replacement for the stock coil?

[biggb]

im not selling the tranny seperate

yes direct replacement coil

troy get ahold of me asap, this stuff has been flying out of my garage lately

[393rag]

Will the Novi work on an SN95? I assume the brackets are different but not sure. Could you pm me pics as well. Thanks

[biggb]

im not sure, to be honest i would think that this particular novi being a driverside mount would work..i know pass side mounts are deffenetly different, i can call paxton and see...

[393rag]

im not sure, to be honest i would think that this particular novi being a driverside mount would work..i know pass side mounts are deffenetly different, i can call paxton and see...

Cool man. Let me know. I'm interested if it'll work.

[Tony71502]

So do you still have the radiator?

[biggb]

yes the rad is still available as of right now, and the coil is direct replacement

[biggb]

Cool man. Let me know. I'm interested if it'll work.

i need an email address for pics.. thanks

[went9s]

Trans sold

[biggb]

this is all i have left.. act fast stuff is flying out the door

msd blaster 2 efi coil -- 25.00 shipped

renegade(drivers side) novi 2000 -- 1800.00 shipped
good race bearing
1000+ hp
extrude honed
tri plane brackets
alternator bracket
7 inch crank pulley
3 inch blower pulley
dual tensioners
new belt
piping for blow thru carb and efi (have both)
mondo bov
bolts,nuts,washers, 100% complete ready to bolt on...

flexalite black magic electric syclone fan w/ shroud 3200 cfm -- 150.00 shipped

pro-m 83mm mass air meter for calib for s/c ,75lb injectors --- 125.00
shipped

please call 814-207-3299 or email ruthlessgsx@aol.com for questions or pics
paypal verified ruthlessgsx@aol.com