pics of axles and tlok

[94svtcobra]

hey Tim heres the pics I pm'ed ya about, anyone else want to chime in please do. just want some other eyes to look at these ands see if there is anything wrong that I'm missing

[blizzard]

C-clips? LOL is this a game or... ??

[scott5]

huh? what kind of axles are those? they look old

[94svtcobra]

I'm thinking about buying these, and I dont know much about the rear end stuff, just looking to do the 31 spline rear end conversion in preperation for bigger things to come, but just want to know what else I'm goin to need to install these

[94svtcobra]

huh? what kind of axles are those? they look old

moser, thats kinda what I was thinking

[scott5]

if your doing that 393 like you said... Why not just go ahead and upgrade to 33 spline and a spool? thing about buying this stuff used is a hit or miss specially just buying with pics and not in person.. just make sure the splines and not rounded off or chewed up.. if it was me i would ask for more close up pics

[94svtcobra]

I might, thats why I'm asking. found these for 250 plus shipping for axles and tlok, but now that I actually have pics, the axles are looking a lil beat

[Sonic03snake]

Those look like stock axles to me bud. Mosers usually have their emblem on the end of them.

[scott5]

I might, thats why I'm asking. found these for 250 plus shipping for axles and tlok, but now that I actually have pics, the axles are looking a lil beat

we paid less than that for brand new moser axles on saturday at summit

[scott5]

Those look like stock axles to me bud. Mosers usually have their emblem on the end of them.

the ones we bought up summit didnt have them in the box, but the part number was stamped on them..

So mike you can ask to see the part number on the axle to make sure they are what he says they are

[94svtcobra]

thanks for the heads up lou, scott I know that you can get the axles for around that, but the tlok is like 280, 300 + with carbon disks new

[scott5]

i would ask for a pic with the part number in it..
And i would just be worried that the rust on those is alil more than surface rust..

[jaa55]

lol this might not be the right way to go about this..........but
from the picture I can count 14 splines visible on this half of the axle...so I'd guess they are 28

[Ares]

Those look like stock axles to me bud. Mosers usually have their emblem on the end of them.

I run 31 spline Mosers and they look just like those in pic, no emblem or anything. As for the T-lok I would want to see all the gear teeth. I have taken chunks out of the spider gears before. Those pics do make it hard to tell if axles are stockers or not.

[92306gt]

I run 31 spline Mosers and they look just like those in pic. As for the T-lok I would want to see all the gear teeth. I have taken chunks out of the spider gears before.

[mustang50lx]

My Moser C clip axles don't have an emblem. They didn't on my Olds either. Both were Moser replacement axles, not the better ones they make.

[Tony71502]

if your doing that 393 like you said... Why not just go ahead and upgrade to 33 spline and a spool? thing about buying this stuff used is a hit or miss specially just buying with pics and not in person.. just make sure the splines and not rounded off or chewed up.. if it was me i would ask for more close up pics

Pretty sure you need c clip eliminators to run 33 splines. At least you do for strange 33 set ups.

[scott5]

Pretty sure you need c clip eliminators to run 33 splines. At least you do for strange 33 set ups.

you do

[94svtcobra]

scott I spoke with Timmy, he said 31 will be plenty

[Rodeheaver's]

nobody that i know of makes 33 spline c-clip axles, besides if you were gonna go 33 spline you better not have c-clips in you rear... 9" housings ends ftw!!