NEW Greg Weld DragStars and Hoosier Slicks

**billyNOTnice** · 09-23-2009, 08:10 PM

I have a brand new set of Greg Weld DragStars that I bought brand new this summer from Summit racing. I mounted basically brand new Hoosier slicks on them, and the skinnies up front have the tires off my old weld wheels. I'm selling these because i have decided I'm going to run straight drag radials from now on... after i get another motor that is. The wheels are mounted, and include the washers that are still new in pack. Lug nuts are not included. These wheels have never been on a car for any reason. These are 5 LUG WHEELS 15x8, 5.5bs. the Hoosiers are 26x10.5's. I apologize for not having a picture of them. but these wheels aren't out in my garage. They are still at my other garage since i moved recently. These wheels are flawless, and slicks have 97% tread left. I'm asking $550obo picked up.

**billyNOTnice** · 09-24-2009, 01:05 PM

Bump for today

**biminiLX** · 09-24-2009, 05:19 PM

My brother PM'd you on these. How far are you from Pittsburgh?
-J

**billyNOTnice** · 09-25-2009, 04:25 AM

I'm about 3 hours from Pittsburgh roughly. I have responded. These are over $700 worth of new wheels and tires. I really need to get $550 out of these. This is the only board I've posted them on thus far. The OBO part at this point was more insinuating of a trade offer.

**biggb** · 09-25-2009, 05:43 AM

billy is a good guy to deal with fella's.. bump for him

**349Stroker** · 09-25-2009, 10:53 PM

$550 is a smokin deal

slicks are $375 themselves

**billyNOTnice** · 09-25-2009, 11:23 PM

thanks guys.... hopefully someone buys them. daddy needs a new motor.

**went9s** · 09-25-2009, 11:59 PM

pics? inthe12sor4sale@aol.com

**billyNOTnice** · 09-26-2009, 12:33 AM

I don't have any pictures. I haven't had time to get down there to take them. They're brand new. I don't think there is much mystery there :) I will try and go take some pictures as soon as i can ok.

**billyNOTnice** · 09-26-2009, 02:22 PM

To the Top Please.

**Inkdcountryboy** · 09-26-2009, 07:49 PM

this is for all 4 wheels and tires correct?

**biminiLX** · 09-26-2009, 08:40 PM

thats what the ad says

**Inkdcountryboy** · 09-26-2009, 09:23 PM

PM sent!

**billyNOTnice** · 09-27-2009, 12:07 AM

Inkdcountryboy... here is a link i just googled. these are what the wheels look like.

**wick** · 09-27-2009, 03:43 PM

Hey Billy, what kind of offset do these have? Will the fronts clear Cobra brakes?

**fastfox91** · 09-27-2009, 11:23 PM

bill is a friend of mine and they are 15x8 with 5.5 on the rear and they will go over 93 cobra brakes

**billyNOTnice** · 09-28-2009, 01:07 AM

wick... with any 15" wheel you might be tight on 13" brakes.. i can't say for sure.

Offset (mm)
-19.00mm FRONTS

Offset (mm)
+25.00mm BACK

**KeystoneJohnny** · 09-28-2009, 05:37 AM

so these won't fit the 03/04 cobra then huh?

**wick** · 09-28-2009, 10:37 AM

Originally Posted by billyNOTnice

wick... with any 15" wheel you might be tight on 13" brakes.. i can't say for sure.

Offset (mm)
-19.00mm FRONTS

Offset (mm)
+25.00mm BACK

This is what I am worried about. I have '03-'04 cobra brakes all the way around on mine. If you were not so far away, I would come try a test fit.

Originally Posted by fordmanforever

so these won't fit the 03/04 cobra then huh?

Not sure.

**billyNOTnice** · 09-28-2009, 01:18 PM

i'm almost positive that you will need spacers for those brakes.. I'm pretty sure you need spacers for any kid of 15" wheel up front. I don't own these cars so i can't say, but surely someone on here has drag wheels on their 03. The guy in the picture i posted above said he used a 1" spacer for the fronts as you can see he has huge brakes also. I'm not sure what size wheels he has in the back though. they might be 10's not 8's.