im looking at a set of axle braces for my 8.8 build...are the worth spending the money on? and also is there a need for a better yoke? i dont have one with this rear so if i gotta order a new one figured id just buy a stronger one...but if a stocker will work..anyone got one laying around for sale? also if anyone who suggest's using that axle brace...what brand ya using? thanks for any info..
2008 Dodge 3500 DRW 6.7 cummins-tow rig
2013 Mustang Gt GHIG
1978 F150 Camper Special
2012 FLHX street glide 103ci 21" front wheel converstion
1999 Harley softail
1998 Buell Thunderbolt
1997 Buell Thunderbolt
2004 polaris 500ho- snow plower
Cub Cadet 582 Kohler V-twin Puller
Want what you can have, not what you cant.
I know Mike at Wolfpack had some nice 8.8 braces a while back for $80 I believe. They looked pretty strong and I know he wouldn't sell something that isn't quality.
I know a few guys that run CHE braces with no complaints...that I know of lol
made some noise....and some boost...and 377/442 rwhp/rwtq
Terry at Street Lethal sells a nice brace.
Lou
Best non ported stock pullied eaton pass
1.50 60ft 11.160@ 125.08
New combo,
Ported Eaton, upper/lower
508 Hp 548 TQ SAE on an inferior Dynojet Dyno
1.43 60 ft. 10.55 @ 130 MPH
WFC 8 Mod Motor Winner
06 NMRA Martin, Mi. Mod Muscle Winner
FORD MUSTANG 8.8" REAR END BRACE & STUD GIRDLE KIT:eBay Motors (item 110439110464 end time Oct-26-09 08:27:51 PDT)
this kit seemed like a good deal...but dunno how about?? i guess ill have see how much terry whats for his brace
2008 Dodge 3500 DRW 6.7 cummins-tow rig
2013 Mustang Gt GHIG
1978 F150 Camper Special
2012 FLHX street glide 103ci 21" front wheel converstion
1999 Harley softail
1998 Buell Thunderbolt
1997 Buell Thunderbolt
2004 polaris 500ho- snow plower
Cub Cadet 582 Kohler V-twin Puller
Want what you can have, not what you cant.
any input on the kit on ebay?? also does anyone know if i could use the rotors and all that off a 99-04 stang to put disc brakes on my 8.8 im doin for the LX?
2008 Dodge 3500 DRW 6.7 cummins-tow rig
2013 Mustang Gt GHIG
1978 F150 Camper Special
2012 FLHX street glide 103ci 21" front wheel converstion
1999 Harley softail
1998 Buell Thunderbolt
1997 Buell Thunderbolt
2004 polaris 500ho- snow plower
Cub Cadet 582 Kohler V-twin Puller
Want what you can have, not what you cant.
If you want you want your rear to look as nice as mine, give Tim a call at Rodeheaver's!He did all the work to mine. I picked up the axle brace kit from a guy on turbomustangs.com that uses the screen name snoopstang that sold them for $100 shipped. High quality rod ends and tubing.
wow that looks great what housing ends did you use ed?
Troy
95 gt 11.3 @ 126
68 f100 SB soon to be coyote powered
12 GT 6m cobra jet powered 11.4 @124
90 lx supercharged 440 rwhp on 8 lbs
17 f150 crew cab coyote powered
PEOPLE HAVE MORE FUN THAN ANYONE
Nice rearend!! im not gonna go with 9inch ends but ill check into the axle braces...i had my cousin weld my tubes he had a quick jig..hes been weling for 30+ years and build dirt track chassis and stuff on the side...so he hooked me up on welding them tubes.. i just need to pick up a set of braces, gears and a rear cover and my rear is complete
2008 Dodge 3500 DRW 6.7 cummins-tow rig
2013 Mustang Gt GHIG
1978 F150 Camper Special
2012 FLHX street glide 103ci 21" front wheel converstion
1999 Harley softail
1998 Buell Thunderbolt
1997 Buell Thunderbolt
2004 polaris 500ho- snow plower
Cub Cadet 582 Kohler V-twin Puller
Want what you can have, not what you cant.
do you have snoopstangs regular email? ill grab a set of his braces. and then i can paint my rearend up
2008 Dodge 3500 DRW 6.7 cummins-tow rig
2013 Mustang Gt GHIG
1978 F150 Camper Special
2012 FLHX street glide 103ci 21" front wheel converstion
1999 Harley softail
1998 Buell Thunderbolt
1997 Buell Thunderbolt
2004 polaris 500ho- snow plower
Cub Cadet 582 Kohler V-twin Puller
Want what you can have, not what you cant.
No, just search for him on turbomustangs.comOriginally Posted by Inkdcountryboy
Timmy would have to answer that one.
Snoopstang is really Chris. Hid e-mail is snoopstang@yahoo.com
He now has a nasty SN95 with a SVO V6 engine but used to be into the 2.3 Fords ;) he still shows up on TurboFord from time to time. The parts are Southern Oulaw Shop (SOS) ...
http://www.thesouthernoutlawshop.com/
This is a direct link to the braces, but the main site says to call to order ...
http://thesouthernoutlawshop.com/car...2&productid=13
Last edited by Martin0660; 10-03-2009 at 05:55 PM.
BTW - In the auction you linked, I'm almost certain those guys are selling the Granacopy cover. I would light my car on fire to save the trouble before putting anything from that jaggoff on it.
yea i figured it was scrap parts after looking at it a few times...i got a Mac diff cover off lou.. and im still in the air on braces.. Those ones from street leathel didnt look bad at all.. plus no welding required! lol but i gotta make a choice this week cause i wanna get this rear end completed so thats one project down and i can move onto getting my team z rear suspension..and keep working my way forward on the car
2008 Dodge 3500 DRW 6.7 cummins-tow rig
2013 Mustang Gt GHIG
1978 F150 Camper Special
2012 FLHX street glide 103ci 21" front wheel converstion
1999 Harley softail
1998 Buell Thunderbolt
1997 Buell Thunderbolt
2004 polaris 500ho- snow plower
Cub Cadet 582 Kohler V-twin Puller
Want what you can have, not what you cant.
..it double posted
2008 Dodge 3500 DRW 6.7 cummins-tow rig
2013 Mustang Gt GHIG
1978 F150 Camper Special
2012 FLHX street glide 103ci 21" front wheel converstion
1999 Harley softail
1998 Buell Thunderbolt
1997 Buell Thunderbolt
2004 polaris 500ho- snow plower
Cub Cadet 582 Kohler V-twin Puller
Want what you can have, not what you cant.
Posting Permissions
Reply With Quote
Bookmarks