1989 GT Black,full 16 pt MOLY 8.50 CERT.
461w Dart block w/ 4 bolt-all 5 caps
EAGLE PENDULUM CUT ESP ARMORED 4.250
PROBE PISTONS
PROBE BILLET I BEAM
super victor
230cc CNC
Hooker 2 in headers
pa sc c4, 4600 stall
9" LADDER 3.70 PRO GEARS
SW BACKHALF
moser 35 SPLINE axles
1050 RACE DOMINATOR DEMON
250 FOGGER KIT
snow performance stage 2
1.316 60ft 9.16@156
1989 GT Black,full 16 pt MOLY 8.50 CERT.
461w Dart block w/ 4 bolt-all 5 caps
EAGLE PENDULUM CUT ESP ARMORED 4.250
PROBE PISTONS
PROBE BILLET I BEAM
super victor
230cc CNC
Hooker 2 in headers
pa sc c4, 4600 stall
9" LADDER 3.70 PRO GEARS
SW BACKHALF
moser 35 SPLINE axles
1050 RACE DOMINATOR DEMON
250 FOGGER KIT
snow performance stage 2
1.316 60ft 9.16@156
1989 GT Black,full 16 pt MOLY 8.50 CERT.
461w Dart block w/ 4 bolt-all 5 caps
EAGLE PENDULUM CUT ESP ARMORED 4.250
PROBE PISTONS
PROBE BILLET I BEAM
super victor
230cc CNC
Hooker 2 in headers
pa sc c4, 4600 stall
9" LADDER 3.70 PRO GEARS
SW BACKHALF
moser 35 SPLINE axles
1050 RACE DOMINATOR DEMON
250 FOGGER KIT
snow performance stage 2
1.316 60ft 9.16@156
Nice. But your bov is on the wrong side. Should be before the cooler and close to the blower.
Rob
1 Monte SS. White.
Banned dates
11/27/08
4/25/11
3/28/12
12/1/12
There are more but that's all that was logged!!!
i was told differentlyOriginally Posted by wick
remember i have a blow thru carb its a little different than TB
also i dont see why it would matter
thanks tho
1989 GT Black,full 16 pt MOLY 8.50 CERT.
461w Dart block w/ 4 bolt-all 5 caps
EAGLE PENDULUM CUT ESP ARMORED 4.250
PROBE PISTONS
PROBE BILLET I BEAM
super victor
230cc CNC
Hooker 2 in headers
pa sc c4, 4600 stall
9" LADDER 3.70 PRO GEARS
SW BACKHALF
moser 35 SPLINE axles
1050 RACE DOMINATOR DEMON
250 FOGGER KIT
snow performance stage 2
1.316 60ft 9.16@156
Gotcha. Forgot about the carb.
Rob
1 Monte SS. White.
Banned dates
11/27/08
4/25/11
3/28/12
12/1/12
There are more but that's all that was logged!!!
that looks pretty awesome man!!
2015 A6 Mustang GT that so far has gone 9.48@147 but still the fastest prochargerd S550 in the world aside from Tim Essick's!
www.Rodeheavershotrod.com
wick check out where this one is you kinda got me thinking and i doubled checked my self
[ame="http://videos.streetfire.net/video/streetcarforums-carb-idl_123918.htm"]streetcarforums. 93turbostang blowthrough carb idl - Car Videos on StreetFire[/ame]
1989 GT Black,full 16 pt MOLY 8.50 CERT.
461w Dart block w/ 4 bolt-all 5 caps
EAGLE PENDULUM CUT ESP ARMORED 4.250
PROBE PISTONS
PROBE BILLET I BEAM
super victor
230cc CNC
Hooker 2 in headers
pa sc c4, 4600 stall
9" LADDER 3.70 PRO GEARS
SW BACKHALF
moser 35 SPLINE axles
1050 RACE DOMINATOR DEMON
250 FOGGER KIT
snow performance stage 2
1.316 60ft 9.16@156
thanks can't wait til next saturday this 408 loves the cool air
1989 GT Black,full 16 pt MOLY 8.50 CERT.
461w Dart block w/ 4 bolt-all 5 caps
EAGLE PENDULUM CUT ESP ARMORED 4.250
PROBE PISTONS
PROBE BILLET I BEAM
super victor
230cc CNC
Hooker 2 in headers
pa sc c4, 4600 stall
9" LADDER 3.70 PRO GEARS
SW BACKHALF
moser 35 SPLINE axles
1050 RACE DOMINATOR DEMON
250 FOGGER KIT
snow performance stage 2
1.316 60ft 9.16@156
Looks pretty damn good man
The best former Rodeheaver's Hot Rod employee ever.
15gt
Premium - Performance Pack - Recaros
94gt
410w - faceplated t56 - s478 - Gone
looks good man... There has been debate forever on what side of the intercooler to put the BOV. Good arguements on both sides, put it where it fits best and call it done ;)
good call sir
1989 GT Black,full 16 pt MOLY 8.50 CERT.
461w Dart block w/ 4 bolt-all 5 caps
EAGLE PENDULUM CUT ESP ARMORED 4.250
PROBE PISTONS
PROBE BILLET I BEAM
super victor
230cc CNC
Hooker 2 in headers
pa sc c4, 4600 stall
9" LADDER 3.70 PRO GEARS
SW BACKHALF
moser 35 SPLINE axles
1050 RACE DOMINATOR DEMON
250 FOGGER KIT
snow performance stage 2
1.316 60ft 9.16@156
Looks good man. Almost similar to my cooler, did you have one on before?
Blow-through, methanol injection, big intercooler, cold fall air......might run GOOD, better have good fuel and traction
Thats my opinion too, as long as its after the blower/turbo its good with me.
-J
'91 LX Bimini Blue
427"/88mm on 16psi
'99 Contour SVT
Clean DD
Something my tuner said to me, which makes a little sence if you think about it, is, you should have it before the cooler so the not needed air is discharged before it has a chance to go through the cooler. The air is going to be somewhat heated from the heatsoaked blower and will be unessasarily heating a cooler. If it goes out before the cooler, there is a better chance for the cooler to be cooled down more than if it was after. In theory it sounds good, especially for a cruising car where you are not always hitting boost. These blowers get real hot too.
Rob
1 Monte SS. White.
Banned dates
11/27/08
4/25/11
3/28/12
12/1/12
There are more but that's all that was logged!!!
haha, you should try a turbo
-J
'91 LX Bimini Blue
427"/88mm on 16psi
'99 Contour SVT
Clean DD
haha, you should try a turbo
-J
HAHAH Yeah. I hear...
Rob
1 Monte SS. White.
Banned dates
11/27/08
4/25/11
3/28/12
12/1/12
There are more but that's all that was logged!!!
I dont know much about them, but wanted to tell ya it looks good
United We 'Stang2002 Mineral Grey V6 5-spdCount Your Blessings, not your Problems
Looks awesome man!!!!
2008 Dodge 3500 DRW 6.7 cummins-tow rig
2013 Mustang Gt GHIG
1978 F150 Camper Special
2012 FLHX street glide 103ci 21" front wheel converstion
1999 Harley softail
1998 Buell Thunderbolt
1997 Buell Thunderbolt
2004 polaris 500ho- snow plower
Cub Cadet 582 Kohler V-twin Puller
Want what you can have, not what you cant.
Looks nice Keith!! ;)
-Frank-
1983 TurboCoupe-- T3, 3" exhaust, front mount, 8.8, LA3, cam -- 13.44@98mph
1973 F250 highboy-- 300/np435/np205 60f/60r 38's
1986 GT-- HCI
2011 WRX
1999 B2500 7.5/9 drop
+1 ...I saw it this afternoon...looks really good bud!....and frank is defenitely one hell of a welder by the looks of it! lol
made some noise....and some boost...and 377/442 rwhp/rwtq
Posting Permissions
Reply With Quote
Bookmarks