Black 1998 GT- PI swap, 3.73's, off road h pipe, flows & some suspension goodies
White 1986 GT T-Tops- BBK shorties, RAM clutch/flywheel, Bassani catted x pipe, MSD ignition, MAC cai, LMM lowering springs, adjustable skocks & struts, MGW short throw, DD
Black 2009 Yamaha YZF-R6- custom levers, -1 front sprocket, Jardine GP-1 exhaust, HIDs, custom undertail, custom black windscreen.
Sure all the time, but as a whole there is not a group of slower moving... in the way... noise making people than HD's. I was woke up last night several times by loud bikes... now I didn't have to work today so I'm not too upset but If I were to run dumps on my Cobra (and thats how loud most bikes are) and cruise around at 3am at WOT the cops would come for me.
so, here we go... and I know this has been covered before... just help me out. A guy from NY is acting like he's coming to look at the Buell. Let's just say he wants to buy it. What do we do? Go to notary, I sign title and have it notarized, then he takes that to his DOT or Title transfer place in NY and pays whatever taxes and whatnot???
thanks!![]()
2019 Colorado ZR2
2015 Corvette Z06
- Shark Grey / Kalahari
- bolt-ons, tune, lots of carbon fiber (642/671 rwhp/tq)
Black 1998 GT- PI swap, 3.73's, off road h pipe, flows & some suspension goodies
White 1986 GT T-Tops- BBK shorties, RAM clutch/flywheel, Bassani catted x pipe, MSD ignition, MAC cai, LMM lowering springs, adjustable skocks & struts, MGW short throw, DD
Black 2009 Yamaha YZF-R6- custom levers, -1 front sprocket, Jardine GP-1 exhaust, HIDs, custom undertail, custom black windscreen.
Am I going to be the only Buell owner left on the board!?
OMG, what do y'all think about this. Just received this email. Seems legit at times, but not at others. I told him I'd get some more pics after I got the tire put on tomorrow (which will be done if anybody is paying attention on here) the attached pic was just of a gixxer 1000. doesn't really lend any credibility to his story. If this is phony, what possibly could be his goal or angle???
Adam,
Thanks for the info, and older pics. Yes, I'd like to see a couple
fresh ones after you finish the front wheel job.
Seat height: a long story sometimes, eh? I'm 5'6" (or used to be;
getting long in the tooth), and have owned and ridden everything except
dressers. My last machine was a '02 'Zuk GSX-R1000, pic attached. The
Suzuki seat height spec'd at 32.7", which I lived with for about 8
years. Like all bikes, this means little when underway, but of course
was a minor balancing act when coming to a stop. I did it with so many
bikes over the years, I just didn't think about it. But now, I'd like a
little more 'leisure' around town (and I don't care for cruisers).
Your XB12S shows a seat height of 30.1" (with the Scg at 28.6), so it's
about 2 and a half inches lower than the Suzuki. As you'll know, the
actual position of the rider's feet on the ground also depends on the
seat padding, contour, and sometimes angle, so a dude really ought to
plant the fanny before making a judgment. If I understand correctly,
the cg gets it's lower height from a combination of different seat,
shorter front spring (shorter fork travel), and different rear
spring/shock. This can just barely be seen in side-by-side photos of
the two bikes. Does this sound correct to you?
I'd like to hear what you have to say on this, and take a look at any
new pics you come up with. I'll then decide about a drive from my home
here in Sayre PA to your place. Hope to hear from you as soon as can be.
Best wishes.
K********
2019 Colorado ZR2
Hmmm. Guy sounds pretty legit, although a bit concerned with seat height. Kind of a weird topic, but when you are short I guess it matters. It all sounds like a real person, and I don't really know what he could get out of this if he doesn't plan on buying the bike. All I could think is just leading you on to not buy it? But who would go through the trouble? Or if he just wanted to steal it maybe? Hard to say without seeing how it goes. I wouldnt meet him at your own house, find somewhere public to meet to show him the bike...![]()
03 Cobra=slow show car...
13 F-150 Limited
Were would be a good place besides craigslist to sell a motorcycle. I am looking to sell my 99 R6. Any ideas?
Well I have it listed on Craigslist and cycle trader for $3,000 but the lowest I'll take is $2,700. The only thing the bike needs is inspected and proberly the clutches replaced. Other than that, it currently has 20,500 miles +/-, D&D exhaust, frame sliders, tinted wind screen, new tires and a few small extras.
![]()
Local forums/Cycle Trader/feeBay/word of mouth
Dan -- 2003 Cobra DSG Coupe #6009
If it looks good, you'll see it. If it sounds good, you'll hear it. If it's marketed right, you'll buy it. But if it's real, you'll feel it. IG: @donuttrump
yeah, I searched cl in his area and there are a few xb12s for sale. why would you drive 6 hours for mine? hmmmmm
one more question about the seat height and I'm going to tell him, "yeah, you're probably going to be fuct if you buy this bike. too big for you. maybe, look into a Kymco scooter".
![]()
2019 Colorado ZR2
BS Scott, get an XB... American made motor. Hell with that new-fangled Austrian contraption.
or pre-order one of these, only making 100 of them. $39,999. OMG !!!
http://www.erikbuellracing.com/motorcycles/1190rs/
Last edited by Troll; 06-29-2011 at 10:25 PM.
2019 Colorado ZR2
Bookmarks