Vid of my car at PRP.

**NateSVT** · 11-19-2009, 04:50 AM

I was just looking on YouTube and found this video of my car from a last month. I ran an 11.9 @ 122 in this vid but my best run of the day was an 11.6517 @ 124.55. I ran a couple 2.0 60's and one 1.9. It's hard to get those 18" street tires to hook. I am building a solid axle over winter and going back up with slicks. I'm going for some mid-high 10s.

[ame="http://www.youtube.com/watch?v=F-XoHSGhyNQ"]YouTube- Nates Cobra[/ame]

Here is my buddy's Del Sol running a 11.6, crappy run. Later that day he ran a 11.3 @ 131. At MIR a few weeks ago he ran an 11.1 @ 124, would have definitely been in the 10s but he cracked the head and let off.

[ame="http://www.youtube.com/watch?v=UJrvRC6vGOk"]YouTube- Turbo Del Sol at PRP 10/25/09[/ame]

**AdamantiumSilvr** · 11-19-2009, 10:31 AM

Nice runz gentz!

**97LaserRed** · 11-19-2009, 12:39 PM

is that slaters delsol??

**u1arunit** · 11-19-2009, 01:19 PM

It's weird that your 1/8 MPH is 102.18. I had that same MPH when I ran 10.94 at 133.65 mph. Something does not seem right. The 1/4 MPH is low for your power and ET is off too. Clutch slipping?

**somethingclever** · 11-19-2009, 01:28 PM

I was going to say the same thing mark.......

102 in teh 1/8 is strong......

I think he's spinning the eaton pretty hard.....maybe pulling some timing out the back door?

Any datatlog's Nate?

**somethingclever** · 11-19-2009, 01:30 PM

Also...I think he's about 500rwhp....so 124-125 on street tires seems about right to me.... but 102 in the 1/8th indicates much more potential.

**u1arunit** · 11-19-2009, 06:19 PM

Yep for some reason I thought he had a twin screw though?

**NateSVT** · 11-19-2009, 07:14 PM

Originally Posted by 97LaserRed

is that slaters delsol??

Yup that's Jay's car.

Originally Posted by u1arunit

It's weird that your 1/8 MPH is 102.18. I had that same MPH when I ran 10.94 at 133.65 mph. Something does not seem right. The 1/4 MPH is low for your power and ET is off too. Clutch slipping?

Yeah Im still using a stock clutch that is starting to slip. I think that might have something to do with it. I'll be replacing it over winter.

Originally Posted by somethingclever

I was going to say the same thing mark.......

102 in teh 1/8 is strong......

I think he's spinning the eaton pretty hard.....maybe pulling some timing out the back door?

Any datatlog's Nate?

Yeah I am probably spinning the Eaton way too much. I'm running a 2.76" upper and a 6LB lower. No datalogs, I don't even know how to do that

.

Originally Posted by u1arunit

Yep for some reason I thought he had a twin screw though?

I did used to have a Kenne Bell 2.2 but I had to sell it when I blew my motor last year. I want to get one this winter but probably won't be able to afford one till later.

**KBCobra** · 11-19-2009, 07:39 PM

Originally Posted by NateSVT

Yup that's Jay's car.
Yeah I am probably spinning the Eaton way too much. I'm running a 2.76" upper and a 6LB lower. No datalogs, I don't even know how to do that

.

Holy HEAT batman hahaha... you need an ice box the size of a garbage can. I remember when I ran that similar setup, my IAT's went through the roof!