416ci - LS3 Build

[thedak]

Quadman and myself will be handling this project.

Block is at the machine shop and these parts will be going there as well.

The entire assembly including the flywheel and clutch assembly will be balanced.

Looking for 550 rwhp - 510 rwtq with this build.

TSP CNCd L92 Heads - Hollow Stem Valves
Yella Terra L92 Roller Rockers
Ported FAST 102
Comp Cam LSR 239/255 .624 114LSA
Callies Compstar Crank 4.000"
Callies Compstar Rods 6.125"
Diamond L92 Pistons 4.065"
Total Seal Rings



4.065" Bore
4.000" Stroke
.040 Head Gasket
70cc Chamber
-2cc Valve relief Pistons
Pistons .005" out of the hole

11.72:1 SCR

To be continued.

[thedak]

This is my old set up before it came out.

OEM LS2
Trick Flow 220 Heads
238/240 .609 112LSA Cam
Yella Terra Rolloer Rockers
FAST 92
Kook 1 7/8" LTs
Meziere EWP
ASP UD Pulley

[thedak]

This is what it used to look like...

[thedak]

Drivetrain and Suspension consists of:

Pedders Track 2 Suspension
GF1320 Inner Billet Stubs
GF1320 Carbon Fiber Driveshaft
GF1320 Level 1 Axles
Harrop Rear Cover
Rocksand Racing Rear Toe Links

Tick Clutch Master Cylinder
Monster Stage 3.5 Clutch
Lightweight Billet Flywheel
Billet Shifter

[SK360]

w00t

[thedak]

Some of these modular guys don't know what the inside of an engine looks like.

[Troll]

Some of these modular guys don't know what the inside of an engine looks like.

well, I couldn't give a fvck less, but you started the BS with this post... post #6 before anybody starting any Ford/GM BS.

The first four posts were you, then a fellow GTO'er saying "woot" then you just randomly throw this out. Now, that's a WTF?

[thedak]

well, I couldn't give a fvck less, but you started the BS with this post... post #6 before anybody starting any Ford/GM BS.

Lemme review post 6

[thedak]

Now, that's a WTF?

That wasn't Ford/GM Bullshit.

I was just stating the truth.

[Sonic03snake]

Lets play nice fellas. This is an on topic thread and one hell of a project. Plus, its good to keep an eye on the competition, LOL

[biminiLX]

Lets play nice fellas. This is an on topic thread and one hell of a project. Plus, its good to keep an eye on the competition, LOL

Exactly, no fun in always racing other Mustangs---I'm not scared of no Chevy motor .
-J

[Twin01cobra]

Some of these modular guys don't know what the inside of an engine looks like.

Bet you know what mustang tail lights look like

[mr4teth]

Bet you know what mustang tail lights look like

....

[thedak]

Bet you know what mustang tail lights look like

....

[pRojekt02GT]

keeping the miles off, perhaps?

[scott5]

nice!

[Sonic03snake]

Dam!! That things going to fly. The color on that thing is just awesome.

[John4cam]

awesome! It's amazing what people are getting out the LS series engines N/A...

[biminiLX]

very nice, some serious parts!
-J

[venom]

wow. that car was badass before you started tearing into it!!!