Results 1 to 12 of 12

Thread: Various 03 Cobra Parts F/S

  1. #1
    Will Work For Car Parts Terminated's Avatar
    Join Date
    Aug 2007
    Location
    Brookline
    Posts
    2,897

    Various 03 Cobra Parts F/S

    All parts have 53k miles. We ordered a drop out for a kit car and these are the things we did not need/use. I can/will get pics for anyone interested. All prices are BO unless otherwise marked.

    Pedal Assembly - Gas/Brake/Clutch/Dead Pedal, good condition, some of the rubber peeling off where the feet usually go, seems like a common issue.
    $100.

    Master Cylinder Assembly - All there, have to see if any of the other hydroboost stuff is available.
    $150 for MC, will look for the other parts.

    Stock Driveshaft - Excellent condition, is missing one of the flanges that we used for the kit. Can be easily sourced.
    $250

    Various Brake Lines - I have to look and see what all they are for, but I can get pics.
    $Make Offer

    HVAC Controls - Excellent condition
    $25

    Supercharger snout cover - Excellent condition, does not come with the bracket that bolts to the snout, was broken.
    $10

    Cruise Control Module
    $40

    I also have some EVAP and Charcoal can stuff I have to go through.

    If you have any questions or want pics, respond here or e-mail me trump.daniel@verizon.net. I can ship or meet up within like 10-15 miles.

    Thanks,

    Dan
    Dan -- 2003 Cobra DSG Coupe #6009

    If it looks good, you'll see it. If it sounds good, you'll hear it. If it's marketed right, you'll buy it. But if it's real, you'll feel it. IG: @donuttrump


  2. #2
    Will Work For Car Parts Terminated's Avatar
    Join Date
    Aug 2007
    Location
    Brookline
    Posts
    2,897
    Bump to the top. Anyone interested? I can get pics for whatever ones you guys want. Gotta move them by 1/25 they're taking up room in the shop.

    Thanks!
    Dan -- 2003 Cobra DSG Coupe #6009

    If it looks good, you'll see it. If it sounds good, you'll hear it. If it's marketed right, you'll buy it. But if it's real, you'll feel it. IG: @donuttrump


  3. #3
    Nothing clever to say.... jaa55's Avatar
    Join Date
    Sep 2007
    Location
    Dayton PA
    Posts
    3,795
    do you have any of the hydroboost lines?
    03 Torch Red Anni. Ed. Cobra

    11 Grabber Blue 5.0, 3D500 spoiler, CS valance, GT premium, interior upgrade package, Brembos, MT-82 and Whipple powered SOLD

    01 cobra: traded

    93 LX Modular 4v swap
    Sean Hyland Motorsport forged rotating assembly, Teksid block, 01 cobra heads, cams and intake SOLD

  4. #4
    Will Work For Car Parts Terminated's Avatar
    Join Date
    Aug 2007
    Location
    Brookline
    Posts
    2,897
    I'll have to look and see... any in specific you're looking for?
    Dan -- 2003 Cobra DSG Coupe #6009

    If it looks good, you'll see it. If it sounds good, you'll hear it. If it's marketed right, you'll buy it. But if it's real, you'll feel it. IG: @donuttrump


  5. #5
    Nothing clever to say.... jaa55's Avatar
    Join Date
    Sep 2007
    Location
    Dayton PA
    Posts
    3,795
    Ill have to look and see which ones I have and which are cut up
    03 Torch Red Anni. Ed. Cobra

    11 Grabber Blue 5.0, 3D500 spoiler, CS valance, GT premium, interior upgrade package, Brembos, MT-82 and Whipple powered SOLD

    01 cobra: traded

    93 LX Modular 4v swap
    Sean Hyland Motorsport forged rotating assembly, Teksid block, 01 cobra heads, cams and intake SOLD

  6. #6
    Will Work For Car Parts Terminated's Avatar
    Join Date
    Aug 2007
    Location
    Brookline
    Posts
    2,897
    Alright just let me know and I can look around.
    Dan -- 2003 Cobra DSG Coupe #6009

    If it looks good, you'll see it. If it sounds good, you'll hear it. If it's marketed right, you'll buy it. But if it's real, you'll feel it. IG: @donuttrump


  7. #7
    Will Work For Car Parts Terminated's Avatar
    Join Date
    Aug 2007
    Location
    Brookline
    Posts
    2,897
    Bumpski

    Master Cylinder (will look for more hydroboost stuff)


    Pedals


    The small piece pulling off


    Clutch Cable


    Washer Fluid Reservoir


    I can get more specific pics if you guys need/want.
    Dan -- 2003 Cobra DSG Coupe #6009

    If it looks good, you'll see it. If it sounds good, you'll hear it. If it's marketed right, you'll buy it. But if it's real, you'll feel it. IG: @donuttrump


  8. #8
    Will Work For Car Parts Terminated's Avatar
    Join Date
    Aug 2007
    Location
    Brookline
    Posts
    2,897
    I also have a transmission mount that was not used. Brand new Energy Suspension 4.1104G fits 1980-1998 Mustang, and 1980-1988 Thunderbird



    Just like this but black polyurethane. I am not sure where the bolts/Washers are, but it's nothing to pick some up for a couple bucks.

    MSRP on these is $43, I've seen them as cheap as $25. I'll sell for $20. This is brand new in the package, but package is open and don't know where the bolts are. It does have the rectangle washer though.
    Last edited by Terminated; 01-26-2010 at 03:05 PM.
    Dan -- 2003 Cobra DSG Coupe #6009

    If it looks good, you'll see it. If it sounds good, you'll hear it. If it's marketed right, you'll buy it. But if it's real, you'll feel it. IG: @donuttrump


  9. #9
    Nothing clever to say.... jaa55's Avatar
    Join Date
    Sep 2007
    Location
    Dayton PA
    Posts
    3,795
    whats the story on the hydroboost lines, have any?
    03 Torch Red Anni. Ed. Cobra

    11 Grabber Blue 5.0, 3D500 spoiler, CS valance, GT premium, interior upgrade package, Brembos, MT-82 and Whipple powered SOLD

    01 cobra: traded

    93 LX Modular 4v swap
    Sean Hyland Motorsport forged rotating assembly, Teksid block, 01 cobra heads, cams and intake SOLD

  10. #10
    Will Work For Car Parts Terminated's Avatar
    Join Date
    Aug 2007
    Location
    Brookline
    Posts
    2,897
    I think there are some there, but I thought you were gonna get back to me with what you needed... Let me take a look tomorrow and I'll get pics of what I have outside of what's posted above.
    Dan -- 2003 Cobra DSG Coupe #6009

    If it looks good, you'll see it. If it sounds good, you'll hear it. If it's marketed right, you'll buy it. But if it's real, you'll feel it. IG: @donuttrump


  11. #11
    Nothing clever to say.... jaa55's Avatar
    Join Date
    Sep 2007
    Location
    Dayton PA
    Posts
    3,795
    I think i need all of them, theres one good one I have i just cant remember which
    03 Torch Red Anni. Ed. Cobra

    11 Grabber Blue 5.0, 3D500 spoiler, CS valance, GT premium, interior upgrade package, Brembos, MT-82 and Whipple powered SOLD

    01 cobra: traded

    93 LX Modular 4v swap
    Sean Hyland Motorsport forged rotating assembly, Teksid block, 01 cobra heads, cams and intake SOLD

  12. #12
    Will Work For Car Parts Terminated's Avatar
    Join Date
    Aug 2007
    Location
    Brookline
    Posts
    2,897
    Pedals are sold -- Thanks Jim.

    Anyone else interested in these parts? Still have stock driveshaft, master cylinder, and a couple other odds and ends.

    -Dan
    Dan -- 2003 Cobra DSG Coupe #6009

    If it looks good, you'll see it. If it sounds good, you'll hear it. If it's marketed right, you'll buy it. But if it's real, you'll feel it. IG: @donuttrump


Similar Threads

  1. cobra parts:SVT focus pump,exhaust parts
    By 1badnotch in forum Ford Vehicles
    Replies: 17
    Last Post: 09-16-2012, 07:29 PM
  2. Mustang Cobra Parts Termy Parts for sale
    By KeystoneJohnny in forum Ford Vehicles
    Replies: 6
    Last Post: 05-31-2010, 01:29 AM
  3. Cobra Parts. Magnaflow, SLP, stock parts, IRS
    By NateSVT in forum Ford Vehicles
    Replies: 9
    Last Post: 02-24-2010, 03:33 PM
  4. 99-04 cobra parts
    By ttk53 in forum Ford Vehicles
    Replies: 6
    Last Post: 02-14-2010, 09:54 PM
  5. 03 cobra parts
    By spectre in forum Ford Vehicles
    Replies: 0
    Last Post: 09-18-2007, 03:20 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •