making progress!!
making progress!!
2015 GTPP
A little more progress today, im using the 03 pedal assembly and hydroboost setup instead of going manual brakes and steering like I usually do on all my cars. Trying to make this an honest to goodness street car. After setting the new pedals in the car and opening the holes in the firewall up to accept the hydroboost setup I had to graft the rear section of the original pedal assembly on the new one, the original steering column mounts to it. Im happy with how it turned out but now I need to figure out how im going to move the pedals back, they are too far from the firewall for my liking. Don't mind the welds, im still in the learning curve.
Lou
Best non ported stock pullied eaton pass
1.50 60ft 11.160@ 125.08
New combo,
Ported Eaton, upper/lower
508 Hp 548 TQ SAE on an inferior Dynojet Dyno
1.43 60 ft. 10.55 @ 130 MPH
WFC 8 Mod Motor Winner
06 NMRA Martin, Mi. Mod Muscle Winner
Heat the pedal arms red hot and bend them down if you want it lower.Do it over about 3 or 4 inches so that way you wont notice it.
Rob
1 Monte SS. White.
Banned dates
11/27/08
4/25/11
3/28/12
12/1/12
There are more but that's all that was logged!!!
Lou
Best non ported stock pullied eaton pass
1.50 60ft 11.160@ 125.08
New combo,
Ported Eaton, upper/lower
508 Hp 548 TQ SAE on an inferior Dynojet Dyno
1.43 60 ft. 10.55 @ 130 MPH
WFC 8 Mod Motor Winner
06 NMRA Martin, Mi. Mod Muscle Winner
looks familiar i think i just did something like this haha
03 Torch Red Anni. Ed. Cobra
11 Grabber Blue 5.0, 3D500 spoiler, CS valance, GT premium, interior upgrade package, Brembos, MT-82 and Whipple powered SOLD
01 cobra: traded
93 LX Modular 4v swap
Sean Hyland Motorsport forged rotating assembly, Teksid block, 01 cobra heads, cams and intake SOLD
Lou
Best non ported stock pullied eaton pass
1.50 60ft 11.160@ 125.08
New combo,
Ported Eaton, upper/lower
508 Hp 548 TQ SAE on an inferior Dynojet Dyno
1.43 60 ft. 10.55 @ 130 MPH
WFC 8 Mod Motor Winner
06 NMRA Martin, Mi. Mod Muscle Winner
didnt change a thing in my car, it still feels the same as it did before..... this is an idea use a 99+ seat track they move way farther back than the fox ones I put a power track in my car out of the 2000 i have and it moved so far back i almost couldnt depress the clutch
03 Torch Red Anni. Ed. Cobra
11 Grabber Blue 5.0, 3D500 spoiler, CS valance, GT premium, interior upgrade package, Brembos, MT-82 and Whipple powered SOLD
01 cobra: traded
93 LX Modular 4v swap
Sean Hyland Motorsport forged rotating assembly, Teksid block, 01 cobra heads, cams and intake SOLD
Lou
Best non ported stock pullied eaton pass
1.50 60ft 11.160@ 125.08
New combo,
Ported Eaton, upper/lower
508 Hp 548 TQ SAE on an inferior Dynojet Dyno
1.43 60 ft. 10.55 @ 130 MPH
WFC 8 Mod Motor Winner
06 NMRA Martin, Mi. Mod Muscle Winner
oh got ya, yeah I guess i do notice that.........my throttle cable was way too long too, it had alot of slack in it
I had to pull all the extra inside the car and shorten it so my pedal could pull it.
03 Torch Red Anni. Ed. Cobra
11 Grabber Blue 5.0, 3D500 spoiler, CS valance, GT premium, interior upgrade package, Brembos, MT-82 and Whipple powered SOLD
01 cobra: traded
93 LX Modular 4v swap
Sean Hyland Motorsport forged rotating assembly, Teksid block, 01 cobra heads, cams and intake SOLD
I also just picked up a Tremec 3550 and a pair of NOS front fenders off of ebay for 150.00 and the guy is delivering them on his way to carlisle. Also got a line on a pair of NOS doors.
Lou
Best non ported stock pullied eaton pass
1.50 60ft 11.160@ 125.08
New combo,
Ported Eaton, upper/lower
508 Hp 548 TQ SAE on an inferior Dynojet Dyno
1.43 60 ft. 10.55 @ 130 MPH
WFC 8 Mod Motor Winner
06 NMRA Martin, Mi. Mod Muscle Winner
Another local.
http://pittsburgh.craigslist.org/cto/1756832473.html
289 slabside cobra
6S1941
40 Ford Sedan Delivery < For Sale
I met that guy and his son at Norwalk, his son is very rarely on here but has a TT 331 LX that they built themselves and runs hard. That Fairmont won at Norwalk last year, it is a nice set-up. They seem like good people, I'm going to start using his shop for my local repairs/inspections since they are close.
-J
'91 LX Bimini Blue
427"/88mm on 16psi
'99 Contour SVT
Clean DD
Another 2 peices to the puzzle, 2 NOS fenders. One is in the original primer and the other was painted but never installed.
Lou
Best non ported stock pullied eaton pass
1.50 60ft 11.160@ 125.08
New combo,
Ported Eaton, upper/lower
508 Hp 548 TQ SAE on an inferior Dynojet Dyno
1.43 60 ft. 10.55 @ 130 MPH
WFC 8 Mod Motor Winner
06 NMRA Martin, Mi. Mod Muscle Winner
Dang this is a cool project!
So what color is she going to be Lou?
2014 GT Premium - Sterling Gray Metallic - MT82 - Track Pack - Glass Roof - Recaro seats - Spoiler delete
12.76 @ 114.04 bone stock. Koni yellow coil-overs, BMR watts, LCA and LCA relo brackets, Borla S-type axle back.
1966 Coupe - 331 stroker - Bullet custom roller cam - cam and motor installed and dyno tuned by Rodeheavers Hot Rod - Astro A5 - McLeod RXT - 486 to the wheels - more fun than my little tires can handle
1966 Oldsmobile Toronado - currently NOT on jackstands
Yes it is.
Don't want to let the cat out of the bag but Lou's going with that Saleen Lizstick Pink :)
Thanks again for meeting me yesterday Lou, you da man!
-J
'91 LX Bimini Blue
427"/88mm on 16psi
'99 Contour SVT
Clean DD
Lou
Best non ported stock pullied eaton pass
1.50 60ft 11.160@ 125.08
New combo,
Ported Eaton, upper/lower
508 Hp 548 TQ SAE on an inferior Dynojet Dyno
1.43 60 ft. 10.55 @ 130 MPH
WFC 8 Mod Motor Winner
06 NMRA Martin, Mi. Mod Muscle Winner
Those are some nice color choices. I've seen a few of them in black - and they look great, but there are a few out there. It is hard to go wrong with DSG, but it doesn't work with a lot of the stock interior colors. My Dad's '63 R2 Avanti is Sunburst Gold - and it is really an awesome color. The metallic is so fine and just jumps off the car in the sunlight. Photos don't do it justice - you have to see it in person. If your interior is brown or tan it would be a great combo. Burnt orange is nice too - I've always liked the color from Project Copperhead on the Trucks show with Stacey David. That would also look nice with a tan or brown interior. Their website used to list the paint code for that color.
Can't wait to see which way you go - now get back to work!!
Last edited by PaxtonShelby; 06-19-2010 at 07:16 PM.
2014 GT Premium - Sterling Gray Metallic - MT82 - Track Pack - Glass Roof - Recaro seats - Spoiler delete
12.76 @ 114.04 bone stock. Koni yellow coil-overs, BMR watts, LCA and LCA relo brackets, Borla S-type axle back.
1966 Coupe - 331 stroker - Bullet custom roller cam - cam and motor installed and dyno tuned by Rodeheavers Hot Rod - Astro A5 - McLeod RXT - 486 to the wheels - more fun than my little tires can handle
1966 Oldsmobile Toronado - currently NOT on jackstands
lou can u add a font in the toolbar that will be a "jealous" font?
New combo going in 410w, tea225 high ports solid roller, novi2000, glens fuel system, pa
Supercomp c4, some other things, hoping to run 10's...update 10.50@120 on 8 burned pistons...hoping to run 9's no cage in sight
Bookmarks