Got a little more done. The floor in this car is near mint. On the fairmonts there is a bracket under the floor that holds part of the ebrake system in place, the floor rusted out in this spot due to water and crap being traped in there. I cut off the bracket 1st and then cut out the bad area of the floor, made a patch, then welded it in. I then had to rebuild the bracket and weld it back in. One more hole to go and rust repair is done.
Lou
Best non ported stock pullied eaton pass
1.50 60ft 11.160@ 125.08
New combo,
Ported Eaton, upper/lower
508 Hp 548 TQ SAE on an inferior Dynojet Dyno
1.43 60 ft. 10.55 @ 130 MPH
WFC 8 Mod Motor Winner
06 NMRA Martin, Mi. Mod Muscle Winner
Got the new front frame rail section installed tonight.
Lou
Best non ported stock pullied eaton pass
1.50 60ft 11.160@ 125.08
New combo,
Ported Eaton, upper/lower
508 Hp 548 TQ SAE on an inferior Dynojet Dyno
1.43 60 ft. 10.55 @ 130 MPH
WFC 8 Mod Motor Winner
06 NMRA Martin, Mi. Mod Muscle Winner
Got a little more done today with a little help from the wife. Taught her how to use the plasma cutter, heat gun, wire wheel and the weld. She finished welding the rocker patch in on the front. I have to make 1 more small patch for the floor and the floor is done and ready for paint on the inside.
Lou
Best non ported stock pullied eaton pass
1.50 60ft 11.160@ 125.08
New combo,
Ported Eaton, upper/lower
508 Hp 548 TQ SAE on an inferior Dynojet Dyno
1.43 60 ft. 10.55 @ 130 MPH
WFC 8 Mod Motor Winner
06 NMRA Martin, Mi. Mod Muscle Winner
this thing is going to be a sweet ride
03 Torch Red Anni. Ed. Cobra
11 Grabber Blue 5.0, 3D500 spoiler, CS valance, GT premium, interior upgrade package, Brembos, MT-82 and Whipple powered SOLD
01 cobra: traded
93 LX Modular 4v swap
Sean Hyland Motorsport forged rotating assembly, Teksid block, 01 cobra heads, cams and intake SOLD
funny that she is working and you are taking pictures
Current Stable
2013 School Bus Yellow Boss 302
1993 Red Cobra
Previous Stable
2012 White Mustang-Traded
2004 Competition Orange Terminator - Sold
2003 Black Cobra-Traded
1998 Black Cobra-Traded
1991 White 5.0 Conv-Sold
1986 Purple 5.0 Trunk-Sold to Psycho 5.0
https://www.facebook.com/steelcitymusclecars
https://www.facebook.com/cruisin.cranberry
hahaha.. Jen just knows that if this car gets done faster then that is closer to when her car will get done... WAIT! is her part going on this car too? uh oh
jen better watch for the hot ones down the bra the fire man will have to come put it out lol
Pimp hand is strong Lou :)
Looks like she was doing better that I would have too.
-J
'91 LX Bimini Blue
427"/88mm on 16psi
'99 Contour SVT
Clean DD
Holy cow ... First steal all your Dad's parts, then put the wife to work cutting and grinding ... You got a handbook or some more of the magic beans that gets all this done?
LOL, when wifey helps me it usually ends with us not talking for a while ;) Good deal Lou
Last edited by Martin0660; 03-22-2010 at 09:37 PM.
Lou
Best non ported stock pullied eaton pass
1.50 60ft 11.160@ 125.08
New combo,
Ported Eaton, upper/lower
508 Hp 548 TQ SAE on an inferior Dynojet Dyno
1.43 60 ft. 10.55 @ 130 MPH
WFC 8 Mod Motor Winner
06 NMRA Martin, Mi. Mod Muscle Winner
Lou
Best non ported stock pullied eaton pass
1.50 60ft 11.160@ 125.08
New combo,
Ported Eaton, upper/lower
508 Hp 548 TQ SAE on an inferior Dynojet Dyno
1.43 60 ft. 10.55 @ 130 MPH
WFC 8 Mod Motor Winner
06 NMRA Martin, Mi. Mod Muscle Winner
Lou
Best non ported stock pullied eaton pass
1.50 60ft 11.160@ 125.08
New combo,
Ported Eaton, upper/lower
508 Hp 548 TQ SAE on an inferior Dynojet Dyno
1.43 60 ft. 10.55 @ 130 MPH
WFC 8 Mod Motor Winner
06 NMRA Martin, Mi. Mod Muscle Winner
It's about time she got of her a$$ and did something
Looking good dude...
She should be in the Kitchen!
Bookmarks