Results 1 to 10 of 10

Thread: Tires

  1. #1
    Senior Member
    Join Date
    Dec 2009
    Location
    Butler, PA
    Posts
    312

    Tires

    So I have a major issue with my tires, I am running a 315/30, it has no sidewall. Would it be a major difference if I went to a 305-45? I could run that on the street and then get a 15" set of rear wheels with a 28x11.50 slick for the track eventually, is it worth swapping to a 305-45 in my case?

  2. #2
    Senior Member scott5's Avatar
    Join Date
    Sep 2006
    Location
    NC
    Posts
    10,168
    you sure its not a 315/35? If your going to get another set for the strip, i would just keep the 315s for the street

  3. #3
    Senior Member
    Join Date
    Dec 2009
    Location
    Butler, PA
    Posts
    312
    Nope its a 315-30-18, 25" tall, the ones I am looking at now are a 325-40 which is a 28" tall for the street, when I go to the 4.0l blower I have sitting at home I will want the best tire I can get for the street, with as much flex as I can get...

  4. #4
    Senior Member scott5's Avatar
    Join Date
    Sep 2006
    Location
    NC
    Posts
    10,168
    that 325/40 is the best of both worlds.. Gives you the sidewall and more tire to the pavement

  5. #5
    Senior Member
    Join Date
    Dec 2009
    Location
    Butler, PA
    Posts
    312
    Quote Originally Posted by scott5 View Post
    that 325/40 is the best of both worlds.. Gives you the sidewall and more tire to the pavement
    Yeah I just think that tiny sidewall isn't going to do me any good with the 315's and I will be able to keep my CCW's for the street instead of having to get rid of them, finally can get rid of my 2.2-2.1 60ft times and get under 12.20's

  6. #6
    never stock biminiLX's Avatar
    Join Date
    Jul 2007
    Location
    Beaver
    Posts
    2,406
    Toyo (Nitto's parent company) also makes a 315/35/18 DR.
    As far as the 325/40/18 goes, I'm assuming you're talking about the M&H DRs?
    If so they run stupid small/skinny unless they are resizing them correctly now.
    -J
    '91 LX Bimini Blue
    427"/88mm on 16psi

    '99 Contour SVT
    Clean DD

  7. #7
    Senior Member
    Join Date
    Dec 2009
    Location
    Butler, PA
    Posts
    312
    Are you sure toyo runs a 315 35? Like I said the m and h is a 28" tall vs my 25" m/t that I have now

  8. #8
    never stock biminiLX's Avatar
    Join Date
    Jul 2007
    Location
    Beaver
    Posts
    2,406
    Quote Originally Posted by XtremeS10 View Post
    Are you sure toyo runs a 315 35? Like I said the m and h is a 28" tall vs my 25" m/t that I have now
    Toyo TQ drag radial 315/35/18:
    http://toyotires.com/tire/pattern/proxes-tq
    I plan on using the 345/40/17 at 27.7" on an 11" rim.

    M&H 325 looks like a 275 tops from the pics I've seen. My brother also had a guy send him pics of a 325 on a 9.5 rim and it looked small. Supposedly someone said they are resizing the tires to be bigger, but haven't paid attention.
    -J
    '91 LX Bimini Blue
    427"/88mm on 16psi

    '99 Contour SVT
    Clean DD

  9. #9
    Senior Member
    Join Date
    Dec 2009
    Location
    Butler, PA
    Posts
    312
    http://www.summitracing.com/parts/MNH-ROD22/

    thats the tire I am looking at, showing minimum wheel should be 11" and tread width at 10.30"
    Last edited by XtremeS10; 12-26-2009 at 09:57 PM.

  10. #10
    Senior Member
    Join Date
    Dec 2009
    Location
    Butler, PA
    Posts
    312
    Actually just looked on Lethals site:

    http://www.lethalperformance.com/07-...-40r18-p-29344

    • Tread Width: 11.3"
    • Section Width: 12.8"
    • Diameter: 28.0"
    • Circumference: 88.0"
    • Rim Size: 12.0"

Similar Threads

  1. Mach 1 Wheels/ Tires/ and snow tires
    By Darren in forum Ford Vehicles
    Replies: 3
    Last Post: 02-26-2012, 09:49 PM
  2. Replies: 22
    Last Post: 12-14-2009, 10:50 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •