PARTING: Complete 95 F-250 Runs Good 460 FI motor, Transfer case, Axles, Susp, Etc.

**onenastytbird** · 02-22-2010, 10:15 PM

THIS IS ACTUALLY A 1997 I APOLOGIZE FOR ANY CONFUSION.

We are only looking to part this truck out so send me your needs. Engine runs strong, the only reason this truck was pulled off the road was the tranny lost forward gears even after a recent rebuild (within a yr). It is complete for now but I'm pulling parts as people need them. Most of the body panels are rough only because of dents, but the drivers door and fender are very very nice and pass. door can be salvaged as it just needs a dent repaired, hoods nice, front bumper isn't bad, but the beds shot due to dents and just being banged around.

List of Parts: Don't see something call or message

Complete Fuel Injected 460 $850. (SOLD!!!)
Complete front or back set of leaf springs $100. each pair
Front Axle $200.
Rear Axle $200.
Tight steering wheel and column w/ NEW key $75. (SOLD!!!)
Gauge cluster $35. (SOLD!!!)
Drivers Door $50. (SOLD!!!)
Drivers Fender $50.(SOLD!!!)
Hood $50. (25. come get it)
Pass. Fender $20. (for cutting out sections as its dented beyond repair)(SOLD!!!)
Windshield (If You Pull) $50. (SOLD!!!)
Transfer Case $150.
Steering Box w/ track bar and tie-rods etc. $75.
Seat (has a small hole and needs cleaned but otherwise decent) $50. (SOLD!!!)
Misc. Interior parts (SOLD!!!)
much more as its still a complete truck!!!

Will Deliver for right price!!!!
(724)954-3175 leave message as we will return the call

**wick** · 02-22-2010, 10:19 PM

How much for the whole truck? what size are the tires?

**wick** · 02-22-2010, 10:20 PM

Doube post...

**onenastytbird** · 02-22-2010, 10:32 PM

I have to return the tires to the place I bought the truck.

I don't have a title in my name but will consider offers on the truck without it but prefer to part it out?

**wick** · 02-22-2010, 10:36 PM

OK. I need tires. My company needs a beater we can destroy on the site property. This would have been perfect but they dont want to spend much. Its a landfill and just needed to go from one side of the property to the other.

**ccoyle0103** · 02-23-2010, 12:37 AM

shoot me a price on the fender and hood....

**turbo83coupe** · 02-23-2010, 05:17 AM

Does that for some reason have a solid front axle?? If so, how much?

**onenastytbird** · 02-23-2010, 07:59 AM

I'll have to double check that front axle.....not sure to be honest. I'm asking $600. for the complete 4X4 setup which will include both front and rear axles, transfer case, and drive-shafts. If someone is interested In the suspension as well I'll throw all 4 leaf springs and any other suspension piece ya need? for an additional $150.

**onenastytbird** · 02-23-2010, 10:33 PM

I looked tonight and the front axle looks like a twin I beam style.

**turbo83coupe** · 02-24-2010, 05:57 AM

Yeah I figured, it was worth a try. I dont thin kthey got a solid front unless it was a one ton when it came to soemthign that new... was worth a try. Good luck with the sale

Originally Posted by onenastytbird

I looked tonight and the front axle looks like a twin I beam style.

**95gts** · 02-24-2010, 10:10 PM

How much for motor

**onenastytbird** · 02-28-2010, 12:26 AM

Added some prices to listing.

For anyone who already showed interest but has not already paid I have everything pretty much removed or will be tomorrow morning so call me and I'll get you directions to pickup items.

**onenastytbird** · 03-01-2010, 08:02 AM

This may help some of you who asked. The rear axle is a Full-Floating, 4.10 Locker....The spring perches are the same width clear back to 79 maybe even older.

**somethingclever** · 03-01-2010, 01:45 PM

Just to clarify for Brooks to help him get this sold:

This will fit trucks that have 44 1/2" spring perches c/c. This dates all the way back to 67, in non-highboy framed trucks.

So: 67-77 F150's
78-96 F-series (1/2 & 3/4ton)

This unit is a full-floating (strong), limited slip (clutches), with 4.10 gears, Sterling 10.25".

It has 1.5" 35 spl axles and is comparable to a Dana 70 rear.

This is a nice upgrade over the 9", and Dana 60's.

I was going to buy this from him but have decided to locate one with the correct gearing for my truck.

Bump for him......$200 is a great price if you need 4.10's.

**onenastytbird** · 03-01-2010, 07:59 PM

btw we need a set of cutting torches too so willing to do some swapping as well. Possibly other items too but only tools etc. no car parts sorry.

**onenastytbird** · 03-02-2010, 07:09 PM

K guys I lowered price of motor to $850. to try and get rid of it soon as we have to pull it here soon and I would think most people want to hear it running. I have a video of it running and plan to take more footage but if anyone wants to see it in person contact me.

I updated the list as I sold the cab and quite a few parts with it today which is why were removing motor to make it easier to pull the cab off.

**onenastytbird** · 03-03-2010, 12:08 AM

I need to post that we just ran the Vin for someone and found out this is a 97 not 95....I honestly never looked and just took the guys word for it not that anythings different between the 95 and 97 but still wanted to post the correct year.

**onenastytbird** · 03-07-2010, 08:28 PM

The only things left are the frame with Leaf springs front and back, Myers Plow Brackets, Steering Box with pitman arm, drag link etc., Good working Transfer case, Both headlights/turn signals, The Front Twin I-Beam style axle with lock-in/lock-out hubs and rear full floating style axle (tag on rear says its a 4.10 ratio locker). I believe this to be it....email or call if you think I may have what ya need.