finally got the blower on and the fox and i are off to sgs thursday for some tune. ill be sure to post numbers when i get back, hopefully she holds together for me
finally got the blower on and the fox and i are off to sgs thursday for some tune. ill be sure to post numbers when i get back, hopefully she holds together for me
Good luck bud!
Wolfpack Speed, Inc.4290 Campbells Run RdPittsburgh, PA 15205(412) 279-4902
thanks mike. i still need to get those c clip eliminator seals re sealed. when your not to swamped at the shop let me know if you could do it. they still leak a little bit and i cant buy another 8.8 at the time so i have to make due
good luck....I've always had good experiences with Dave.
-JOHN
Carburetors and SAE wrenches.................
Buy Made in the USA - It Matters.
you going up with Wink?
Last time I checked, Thursday and Friday were two different days. They don't know each other either.Originally Posted by TooFast98Cobra
Rob
1 Monte SS. White.
Banned dates
11/27/08
4/25/11
3/28/12
12/1/12
There are more but that's all that was logged!!!
ohhh a funny guy huh? you better lose the attitude cat
What u shooting for
No I'm going alone but last I talked to him he didn't no when he was goin. Hope his tune goes a lil bbetter this time
Anything over 400 at the ground and I know wink
Sweet
Everything went great. She only laid down 360 hp and 400 tq at the ground not quite my 400 mark but the car is ridiculously responsive and the power is right now so I can't complain. Thanks again to all the guys at sgs
Good to hear...that's still alot of power and will make for a serious street car.
-JOHN
Carburetors and SAE wrenches.................
Buy Made in the USA - It Matters.
It runs really good and enough power to get me in trouble so I'm happy
Cool!What heads and intake are you running?
Trick flow street burner and patriot performance heads. I probably should have went with the track heat manifold but my cam is an e cam and that cuts off at 5500 as well as the street burner so its pretty well matched
cant wait to see it at the FLD's
XXX RWHP
XXX RWTQ
But only if I let Kenne scream at ya. LOL
Gray 5.o what is your full combo you are running.
SGS tuned mine and did an excellet job also, cant complain about the price either! 430hp and 420tq approx with my combo in the signature.
1986 GT, fresh 302, GT40 irons, Cobra upper and lower, Trick flow stage 1 cam, 8-10lbs from Vortec, AEM meth, UPR power pipe, 42's, 90mm LMAF, BBK longtubes, Full Mac exaust, SCT chip tuned at SGS Automotive, 3.55's, subframes, short throw, 23000 original miles
4 eyed mustang do your gt40 irons have any port work done to them?
A very small amount to the exaust ports by the previous owner of them, upgraded springs, valve job, and a light shave to make them nice and flat.
1986 GT, fresh 302, GT40 irons, Cobra upper and lower, Trick flow stage 1 cam, 8-10lbs from Vortec, AEM meth, UPR power pipe, 42's, 90mm LMAF, BBK longtubes, Full Mac exaust, SCT chip tuned at SGS Automotive, 3.55's, subframes, short throw, 23000 original miles
Posting Permissions
Reply With Quote
Bookmarks