Clutch/flywheel question:

[ModularMike]

Will a clutch kit that is made to use with my stock t-45 work behind a 2003 Cobra flywheel?

This clutch: http://www.americanmuscle.com/ram-po...tch.html?lct=s

behind a stock OEM 2003 Cobra aluminum flywheel.

[jaa55]

it wont work, you need an 11inch

the 96-98s are drilled both for 10.5 and 11 inch

[jaa55]

This is the one you need........

http://www.americanmuscle.com/ram-hd...v8-clutch.html

[ModularMike]

Thanks for the reply. So in reality would any clutch for a 99-04 Cobra/Mach 1 or Mid 01-04 GT work? Like I said its my stock 1998 GT t-45 behind a '03 Cobra flywheel and '03 Motor.

[ModularMike]

Now that I think about it too, will my tranny even work? Are the splines the same? What would I need to do to make it work?

[jaa55]

yep your t-45 will work, im using a cobra flywheel too. Thats actually the clutch I bought for use with my t-5

[ModularMike]

yep your t-45 will work, im using a cobra flywheel too. Thats actually the clutch I bought for use with my t-5

Sounds good man thanks for all the help!

[jaa55]

no problem man good luck with it!

[White5.0]

just curious...why are you putting the t45 in the 03 cobra?

[ModularMike]

Helping a friend with a 4v swap into his GT that is all