2005-09 Tires, Intake, CMCP, CAI, and Exhaust parts FS

[Peej20]

I have these s197 parts in Plum but I work out towards the Airport so I may be able to meet in that area as well. I tried to do some research before setting prices, but please feel free to PM if you would like to discuss any of them.
1. Set of four 235/50ZR18 BFG g-Force T/A KDWS with less than 3k miles. $592 before shipping from Tire Rack… I’m asking $400(Tires only, wheels in picture are not included)




2. GT Intake Manifold. Includes Charge Motion Control Plates and everything else attached in these pictures. The CMCVs would be perfect for making your own Delete plates to gain some top end and I’d be happy to point you in the right direction if you don’t already know how. For the sake of a starting point: I’m asking $80for everything or $55 CMCV/$35 manifold
I also have a stock throttle body if anybody needs it... SOLD


3.Extra filter for Steeda/Ford Racing cold air intake. Nice to have for a DD so that you can still drive your car while your other filter dries after cleaning. I followed what the Shelby forums guys have said and gently cleaned it with diluted Simple Green. Haven’t used it since. I believe it is the same as part #281-STE100 for $54.95 from Steeda… $25



4. Pair of Bullitt Axle-backs. Car had less than 5k miles when replaced with Stingers to match the new x-pipe. Minor handling scratches that cannot be seen from more than 3 feet away. Same as FRPP part #M-5230-GTB. Best retail price that I’ve seen was $390, asking $200.



5. Bullitt cold air intake. Off of the same <5k miles car as the axlebacks, includes everything pictured here. Almost the same as FRPP other than the box on the intake tube and non-painted lettering..... SOLD

6.Stock GT over-axle pipes and cut-off h-pipe. Also off the <5k car. The h-pipe was cut for the new x pipe but this would perfect for anyone looking to put duals on his V6. All you would need are these three pieces, a couple clamps, and some mufflers. Asking $75 for the over-axle pipes and you can have the section of h-pipe if you want it

[Flyin Monkey]

What is the tip diameter on those bullets? I may be interested...

[Peej20]

What is the tip diameter on those bullets? I may be interested...

3.5" diameter polished 304 stainless steel tips

[TYR FRYR]

i'm interested in the throttle body and CAI, assuming they are still available.
Not sure where Plum is, but I do know where the airport is.

[Peej20]

i'm interested in the throttle body and CAI, assuming they are still available.
Not sure where Plum is, but I do know where the airport is.

Plum is about 20 mins east of downtown Pittsburgh and about 1:15 from the Wheeling Civic Center (or whatever it's called now), next to Monroeville. I work in Moon Twp. and I usually head out of there around 3:30. Just to make sure nobody gets mislead, the throttle body is just the stock one off of a Bullitt that was getting a supercharger. I don't know of any difference from a regular GT.

[TYR FRYR]

Thanks for the quick reply- I'll let you know tomorrow morning if the throttlebody will work. Hubby needs it for his '05 GT.
I think the Wheeling Civic Center has another name, but everyone still calls it "the Civic Center".
If this works out, I'd prefer the Moon Twp location for pickup. Is there a faster way to contact you? If this is the right part, I could come up tomorrow early afternoon.

[Peej20]

found my tire depth gauge... the tires that came off of the rear have a little less than 75&#37; of the tread while the fronts still have 90%, guess the PO got a little carried away with the go-pedal

[Peej20]

CAI and throttle body are sold.... thanks to "TYR FRYR." I'll listen to reasonable offers on everything else.

[TYR FRYR]

Already installed!
No chance for a test drive yet, hopefully tomorrow.
It was a pleasure to meet you!

[Peej20]

I've gotten some offers on other sites but nobody local and I'd really rather not have to deal with shipping, not to mention paypal. New prices and still open to offers on most of this stuff:

1. Tires = $400
2. Intake manifold + CMCV = $80
or Manifold = $35, CMCV = $55
3. Extra Steeda filter =$25
4. Bullitt mufflers = $200
5. SOLD
6. Over-axle exhaust pipes = $75 (free section of h-pipe for V6 conversion, if you want it)

[Peej20]

bump

[Peej20]

bump... no hurry to sell, but it's all just sitting in my garage so I'll listen to reasonable offers on any of this stuff if anyone wants/needs something

[Peej20]

If any of the 221 viewers were interested in the Bullitt mufflers...

I just got an offer for $225 shipped on another site so I'll go down to $180 if you take them within the next two days and save me the hassle of shipping them.