Long tube headers/Fox body

[coralcoupe1993]

Do I need to change my steering linkage?

[Viper_ed]

More than likely you will have to get a Flaming River Steering shaft. I know that with the Canfield heads, even the Flaming River shaft had a slight clearance issue still. I'd say there will be about a 75% chance you may have a steering shaft clearance issue.

[Sonic03snake]

You might have to use a Flaming River steering shaft with 1 3/4 headers.

[Viper_ed]

BTW, I had MAC 1-5/8" headers on it cause I tried 3 other sets and none would clear the Lakewood Steel Bellhousing.

[coralcoupe1993]

BTW, I had MAC 1-5/8" headers on it cause I tried 3 other sets and none would clear the Lakewood Steel Bellhousing.

Yea, everything fits well now and I have clearence around the Lakewood, why change it.

[Balaska347]

I run MAC 1 5/8" and they worked fine with the steering shaft. They weren't any fun installing thou.

[coralcoupe1993]

I run MAC 1 5/8" and they worked fine with the steering shaft. They weren't any fun installing thou.

Cool! The Long tubs suck putting on.

[Stangman701]

My BBK 1 5/8" long tubes rub the steering shaft slightly, but have done so for probably 50,000 miles with no issues or noises.

[93Cobra5.0]

I have Hooker 1 5/8 super comp's on mine and clearance is tight, but they fit and dont make any noise.


- Mike

[coralcoupe1993]

I think I will just keep what I have. I wanted long tubes and I was going to put the headers from the notch on the vert (1 5/8) with a prochamber.