Page 1 of 3 123 LastLast
Results 1 to 20 of 43

Thread: Parting out 1993 Mustang Coupe # 2

  1. #1
    SCS Founder Sonic03snake's Avatar
    Join Date
    Aug 2006
    Location
    Mt Pleasant, PA
    Posts
    4,905

    Parting out 1993 Mustang Coupe # 2

    Just picked up another 93 Coupe, 4 cyl auto, runs great. There are a ton of nice parts on it, let me know what you need. 1-724-516-nine five five three.
    Attached Images Attached Images
    Lou
    Best non ported stock pullied eaton pass
    1.50 60ft 11.160@ 125.08

    New combo,
    Ported Eaton, upper/lower
    508 Hp 548 TQ SAE on an inferior Dynojet Dyno
    1.43 60 ft. 10.55 @ 130 MPH

    WFC 8 Mod Motor Winner
    06 NMRA Martin, Mi. Mod Muscle Winner

  2. #2
    Senior Member
    Join Date
    Aug 2010
    Location
    washington,pa
    Posts
    201
    does it have an a4ld? if so does it shiftfine? how much for it. also will it go into a 90 4cyl...i heard that there was a year they went from a 2 prong connector to a 3? sorry about all the ?'s thanks

  3. #3
    Tripedalist yeahloh95's Avatar
    Join Date
    Aug 2006
    Location
    Everett, Pa
    Posts
    5,065
    lou what are the seats like ?
    Troy
    95 gt 11.3 @ 126
    68 f100 SB soon to be coyote powered
    12 GT 6m cobra jet powered 11.4 @124
    90 lx supercharged 440 rwhp on 8 lbs
    17 f150 crew cab coyote powered

    PEOPLE HAVE MORE FUN THAN ANYONE

  4. #4
    SCS Founder Sonic03snake's Avatar
    Join Date
    Aug 2006
    Location
    Mt Pleasant, PA
    Posts
    4,905
    Quote Originally Posted by blk93notch View Post
    does it have an a4ld? if so does it shiftfine? how much for it. also will it go into a 90 4cyl...i heard that there was a year they went from a 2 prong connector to a 3? sorry about all the ?'s thanks
    Trans shifts good, You car take it for a spin in the lot. Not sure on the prong thing, 4 cyl stuff is not my specialty.
    Lou
    Best non ported stock pullied eaton pass
    1.50 60ft 11.160@ 125.08

    New combo,
    Ported Eaton, upper/lower
    508 Hp 548 TQ SAE on an inferior Dynojet Dyno
    1.43 60 ft. 10.55 @ 130 MPH

    WFC 8 Mod Motor Winner
    06 NMRA Martin, Mi. Mod Muscle Winner

  5. #5
    SCS Founder Sonic03snake's Avatar
    Join Date
    Aug 2006
    Location
    Mt Pleasant, PA
    Posts
    4,905
    Quote Originally Posted by yeahloh95 View Post
    lou what are the seats like ?
    Seats are sold.
    Lou
    Best non ported stock pullied eaton pass
    1.50 60ft 11.160@ 125.08

    New combo,
    Ported Eaton, upper/lower
    508 Hp 548 TQ SAE on an inferior Dynojet Dyno
    1.43 60 ft. 10.55 @ 130 MPH

    WFC 8 Mod Motor Winner
    06 NMRA Martin, Mi. Mod Muscle Winner

  6. #6
    Senior Member
    Join Date
    Aug 2010
    Location
    washington,pa
    Posts
    201
    ok sounds good. let me do some research on it. what would you want for it. also i need 2 front fenders. shoot me a price. thanks again

  7. #7
    SCS Founder Sonic03snake's Avatar
    Join Date
    Aug 2006
    Location
    Mt Pleasant, PA
    Posts
    4,905
    Quote Originally Posted by blk93notch View Post
    ok sounds good. let me do some research on it. what would you want for it. also i need 2 front fenders. shoot me a price. thanks again
    100.00 on the trans.. Whay year fenders?
    Lou
    Best non ported stock pullied eaton pass
    1.50 60ft 11.160@ 125.08

    New combo,
    Ported Eaton, upper/lower
    508 Hp 548 TQ SAE on an inferior Dynojet Dyno
    1.43 60 ft. 10.55 @ 130 MPH

    WFC 8 Mod Motor Winner
    06 NMRA Martin, Mi. Mod Muscle Winner

  8. #8
    Senior Member
    Join Date
    Aug 2010
    Location
    washington,pa
    Posts
    201
    i have a 90. ill take any year but if they are the 91-93 then i will need the bottom front piece for each fender. thanks

  9. #9
    Senior Member
    Join Date
    Aug 2010
    Location
    washington,pa
    Posts
    201
    and im very interested in the tranny.

  10. #10
    SCS Founder Sonic03snake's Avatar
    Join Date
    Aug 2006
    Location
    Mt Pleasant, PA
    Posts
    4,905
    I have a nice clean pair of used original ford 79 - 90 fenders, 60.00 EA
    Lou
    Best non ported stock pullied eaton pass
    1.50 60ft 11.160@ 125.08

    New combo,
    Ported Eaton, upper/lower
    508 Hp 548 TQ SAE on an inferior Dynojet Dyno
    1.43 60 ft. 10.55 @ 130 MPH

    WFC 8 Mod Motor Winner
    06 NMRA Martin, Mi. Mod Muscle Winner

  11. #11
    Marine Eng. Officer ArmyWarrant's Avatar
    Join Date
    Jul 2007
    Location
    Fort Eustis, VA
    Posts
    525
    How much for the interior panels lou everything except the dash, also quarter windows?
    90 GT stock needing some minor work, traded my 87 Vert to my bro for it.

    2004 RAM 1500 Quad Cab Hemi DD Gonna be up for sale soon
    86 Notch New Project

  12. #12
    SCS Founder Sonic03snake's Avatar
    Join Date
    Aug 2006
    Location
    Mt Pleasant, PA
    Posts
    4,905
    Quote Originally Posted by ArmyWarrant View Post
    How much for the interior panels lou everything except the dash, also quarter windows?
    Is your car manual or power window?
    Lou
    Best non ported stock pullied eaton pass
    1.50 60ft 11.160@ 125.08

    New combo,
    Ported Eaton, upper/lower
    508 Hp 548 TQ SAE on an inferior Dynojet Dyno
    1.43 60 ft. 10.55 @ 130 MPH

    WFC 8 Mod Motor Winner
    06 NMRA Martin, Mi. Mod Muscle Winner

  13. #13
    Marine Eng. Officer ArmyWarrant's Avatar
    Join Date
    Jul 2007
    Location
    Fort Eustis, VA
    Posts
    525
    it's manual right now but with the harness I'm getting from you out of the 89 vert it will have all the provisions for power except I will have to get regulators and motors for the power windows and locks
    90 GT stock needing some minor work, traded my 87 Vert to my bro for it.

    2004 RAM 1500 Quad Cab Hemi DD Gonna be up for sale soon
    86 Notch New Project

  14. #14
    SCS Founder Sonic03snake's Avatar
    Join Date
    Aug 2006
    Location
    Mt Pleasant, PA
    Posts
    4,905
    Quote Originally Posted by ArmyWarrant View Post
    it's manual right now but with the harness I'm getting from you out of the 89 vert it will have all the provisions for power except I will have to get regulators and motors for the power windows and locks
    Door panels, quarter trim panels, kick panels, what else?
    Lou
    Best non ported stock pullied eaton pass
    1.50 60ft 11.160@ 125.08

    New combo,
    Ported Eaton, upper/lower
    508 Hp 548 TQ SAE on an inferior Dynojet Dyno
    1.43 60 ft. 10.55 @ 130 MPH

    WFC 8 Mod Motor Winner
    06 NMRA Martin, Mi. Mod Muscle Winner

  15. #15
    Marine Eng. Officer ArmyWarrant's Avatar
    Join Date
    Jul 2007
    Location
    Fort Eustis, VA
    Posts
    525
    Quote Originally Posted by Sonic03snake View Post
    Door panels, quarter trim panels, kick panels, what else?
    headliner, a pillar trim, center console, seat beltsbasically everything except carpet and dash
    90 GT stock needing some minor work, traded my 87 Vert to my bro for it.

    2004 RAM 1500 Quad Cab Hemi DD Gonna be up for sale soon
    86 Notch New Project

  16. #16
    SCS Founder Sonic03snake's Avatar
    Join Date
    Aug 2006
    Location
    Mt Pleasant, PA
    Posts
    4,905
    Quote Originally Posted by ArmyWarrant View Post
    headliner, a pillar trim, center console, seat beltsbasically everything except carpet and dash
    hows 150.00 sound?
    Lou
    Best non ported stock pullied eaton pass
    1.50 60ft 11.160@ 125.08

    New combo,
    Ported Eaton, upper/lower
    508 Hp 548 TQ SAE on an inferior Dynojet Dyno
    1.43 60 ft. 10.55 @ 130 MPH

    WFC 8 Mod Motor Winner
    06 NMRA Martin, Mi. Mod Muscle Winner

  17. #17
    Marine Eng. Officer ArmyWarrant's Avatar
    Join Date
    Jul 2007
    Location
    Fort Eustis, VA
    Posts
    525
    Quote Originally Posted by Sonic03snake View Post
    hows 150.00 sound?
    Sounds good to me, how much more for the quarter windows? are they in good shape
    90 GT stock needing some minor work, traded my 87 Vert to my bro for it.

    2004 RAM 1500 Quad Cab Hemi DD Gonna be up for sale soon
    86 Notch New Project

  18. #18
    SCS Founder Sonic03snake's Avatar
    Join Date
    Aug 2006
    Location
    Mt Pleasant, PA
    Posts
    4,905
    Quote Originally Posted by ArmyWarrant View Post
    Sounds good to me, how much more for the quarter windows? are they in good shape
    They are fair, one side is pretty nice the other is oxidized. 25 for the pair. I probably can hook you up with all the power internals too.
    Lou
    Best non ported stock pullied eaton pass
    1.50 60ft 11.160@ 125.08

    New combo,
    Ported Eaton, upper/lower
    508 Hp 548 TQ SAE on an inferior Dynojet Dyno
    1.43 60 ft. 10.55 @ 130 MPH

    WFC 8 Mod Motor Winner
    06 NMRA Martin, Mi. Mod Muscle Winner

  19. #19
    Marine Eng. Officer ArmyWarrant's Avatar
    Join Date
    Jul 2007
    Location
    Fort Eustis, VA
    Posts
    525
    Sounds good Lou, how much for the power stuff? I may have to wait on that stuff though, I should be able to pay you for the coupe interior stuff when I pick up the vert parts
    90 GT stock needing some minor work, traded my 87 Vert to my bro for it.

    2004 RAM 1500 Quad Cab Hemi DD Gonna be up for sale soon
    86 Notch New Project

  20. #20
    SCS Founder Sonic03snake's Avatar
    Join Date
    Aug 2006
    Location
    Mt Pleasant, PA
    Posts
    4,905
    Quote Originally Posted by ArmyWarrant View Post
    Sounds good Lou, how much for the power stuff? I may have to wait on that stuff though, I should be able to pay you for the coupe interior stuff when I pick up the vert parts
    Another 50, ill have to see what I have. If I have it you can take it and send money when you get it.
    Lou
    Best non ported stock pullied eaton pass
    1.50 60ft 11.160@ 125.08

    New combo,
    Ported Eaton, upper/lower
    508 Hp 548 TQ SAE on an inferior Dynojet Dyno
    1.43 60 ft. 10.55 @ 130 MPH

    WFC 8 Mod Motor Winner
    06 NMRA Martin, Mi. Mod Muscle Winner

Similar Threads

  1. Parting out modified 1987 5.0 Coupe
    By mustang50lx in forum Ford Vehicles
    Replies: 30
    Last Post: 11-01-2014, 07:51 PM
  2. Parting out: 81 Mustang Coupe.
    By Sonic03snake in forum Ford Vehicles
    Replies: 10
    Last Post: 08-28-2011, 07:49 PM
  3. Parting out 1993 Mustang Coupe
    By Sonic03snake in forum Ford Vehicles
    Replies: 11
    Last Post: 11-25-2010, 11:29 PM
  4. Parting 90 coupe
    By Mark Aubele in forum Ford Vehicles
    Replies: 4
    Last Post: 05-05-2009, 05:45 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •