Fox lower quarter patch panels

**Scott Rod Fab** · 08-30-2010, 05:50 PM

I am hearing that since these areas rust out bad, that finding nice clean quarters with the lower in decent shape is getting tougher and tougher. My question is, have any of you guys been looking, or have had to buy a new skin, and cut off the lower section? I have been getting some calls on this piece, so I decided to mock one up. Tell me what you think, and if this is something we should start to carry. These are the section behind the tire, and the top is cut at the body line behind the trim molding.
Thanks, Scott

**White5.0** · 08-30-2010, 05:52 PM

i think thats a great idea. those are definitely a problem area and ive never seen anyone else sellin them... if you start to sell them my father could use them!

**Scott Rod Fab** · 08-30-2010, 05:56 PM

My dad sells new sheet metal, and he said that no one is re poping just the lower section, only the whole quarter. So I figured I would make one. It matches the stock contour, and wheel well lip.

**Sonic03snake** · 08-30-2010, 06:09 PM

Im sure I could sell those for you at Laurel, let me know if your interested in doing some for other dealers.

**Scott Rod Fab** · 08-30-2010, 06:12 PM

Originally Posted by Sonic03snake

Im sure I could sell those for you at Laurel, let me know if your interested in doing some for other dealers.

Whats the date you are going?

**Sonic03snake** · 08-30-2010, 06:33 PM

Originally Posted by Scott Rod Fab

Whats the date you are going?

I mean we could stock them at the shop and sell for you. Put them on our web store.

**Scott Rod Fab** · 08-30-2010, 06:58 PM

Originally Posted by Sonic03snake

I mean we could stock them at the shop and sell for you. Put them on our web store.

Sorry Lou, I had fuzz on the brain. I read it wrong. I will get with you on that, Thanks

**yeahloh95** · 08-30-2010, 06:09 PM

yes great idea i'll take a set when you are ready to start selling them unless the full quarter works better for my dd

**Scott Rod Fab** · 08-30-2010, 07:07 PM

Ok, let me know.

**How Much?** · 08-31-2010, 05:00 AM

Hey man, i have a really good idea for ya.....the fiberglass lower fender piece...87-90these are the bigger ones 91-93smaller ones,,,,,,Your dam good with making stuff,,,,,Ask Lou......people would be all over them,,,,,,because the are usally cracked.......Just a idea,,,and that lower Quarter Is a good idea,,, i watched a buddy hack up a really nice southern car for that :(

**biminiLX** · 08-30-2010, 10:40 PM

Good idea Scott, might work for those guys that want to run over 28" tires as that is a section to modify. Might make it easier.
-J

**Scott Rod Fab** · 08-30-2010, 10:44 PM

Originally Posted by biminiLX

Good idea Scott, might work for those guys that want to run over 28" tires as that is a section to modify. Might make it easier.
-J

Yeah, between the rust issue, and bigger tires, hopefully these will help.

**Martin0660** · 08-30-2010, 10:50 PM

Scott - Are you planning to be at NMRA Columbus?

**Scott Rod Fab** · 08-30-2010, 11:02 PM

Originally Posted by Martin0660

Scott - Are you planning to be at NMRA Columbus?

The next NMRA event we are going to is the Bowling green, Ky race at the end of Sept. We are busy getting things ready for BG, and trying to get new parts mocked up. So hopefully some of you guy's will make the haul to BG to race.

**Scott Rod Fab** · 08-31-2010, 09:41 AM

If you are asking if I can remake these pieces out of fiberglass , I don't get into the glass work. I would have to look at them really close to see if they could be made out of steel.

**biminiLX** · 09-01-2010, 11:52 AM

That is actually a good idea if they could be made as above, not fiberglass.
I would also recommend the 91-93 panels if you're going to do just one as these give more wheel clearance.
-J