I need a pair of 5 on 4.5" bolt pattern wheels to mount my ET streets on for the strip. Prefer a pair of 15"x8" prostars with 5.5" backspacing,but let me know what you have. I need something ASAP. Thanks.
Mark 703 801-8615 cell
I need a pair of 5 on 4.5" bolt pattern wheels to mount my ET streets on for the strip. Prefer a pair of 15"x8" prostars with 5.5" backspacing,but let me know what you have. I need something ASAP. Thanks.
Mark 703 801-8615 cell
2013 Mustang GT,ingot silver,black leather,MT82,track pack,Kooks headers/x-pipe,GT500 OA pipes,Roush mufflers.
2002 F250 Lariat,dark shadow gray,gray leather,CCSB,4x4,7.3 diesel,auto,lots of mods.
2017 Explorer XLT,canyon ridge,black cloth,AWD,2.3 Ecoboost,K&N filter
2010 Flex Limited,ingot silver,black leather,AWD,3.5 Ecoboost,AFE filter,HD brakes
2014 Honda Pioneer 700-4,'89 Yamaha Blaster
Kubota B7800,30hp diesel,AG tires,front loader,box blade
You sure you dont need 5.5 BS?
Rob
1 Monte SS. White.
Banned dates
11/27/08
4/25/11
3/28/12
12/1/12
There are more but that's all that was logged!!!
Neverming Mark. I read it wrong. HAHA I need the same wheels.
Rob
1 Monte SS. White.
Banned dates
11/27/08
4/25/11
3/28/12
12/1/12
There are more but that's all that was logged!!!
That's cool,Rob. I actually have a pair of 15x8 with 4.5" backspacing. They look good,but push the tires out too far and they rub a little. So I guess 5.5" backspacing will be good.
Mark
2013 Mustang GT,ingot silver,black leather,MT82,track pack,Kooks headers/x-pipe,GT500 OA pipes,Roush mufflers.
2002 F250 Lariat,dark shadow gray,gray leather,CCSB,4x4,7.3 diesel,auto,lots of mods.
2017 Explorer XLT,canyon ridge,black cloth,AWD,2.3 Ecoboost,K&N filter
2010 Flex Limited,ingot silver,black leather,AWD,3.5 Ecoboost,AFE filter,HD brakes
2014 Honda Pioneer 700-4,'89 Yamaha Blaster
Kubota B7800,30hp diesel,AG tires,front loader,box blade
i have a set of drag lites 15x10 i think they have a 5.5 or 6 in bs ill check tomorrow whn i head out to the garage
1989 GT Black,full 16 pt MOLY 8.50 CERT.
461w Dart block w/ 4 bolt-all 5 caps
EAGLE PENDULUM CUT ESP ARMORED 4.250
PROBE PISTONS
PROBE BILLET I BEAM
super victor
230cc CNC
Hooker 2 in headers
pa sc c4, 4600 stall
9" LADDER 3.70 PRO GEARS
SW BACKHALF
moser 35 SPLINE axles
1050 RACE DOMINATOR DEMON
250 FOGGER KIT
snow performance stage 2
1.316 60ft 9.16@156
If Mark or Rob don't want the 15x10s then I might be interested depending on the backspacing and price.Originally Posted by 90TitaniumStang
2004 SVT Cobra - sold
2000 Yamaha R1
2006 Yamaha R1 - Raven
10.89 @ 127.6 1.61 60' with a ported Eaton
Those might work. Let me know what the backspacing is and a price. Thanks.
Mark
2013 Mustang GT,ingot silver,black leather,MT82,track pack,Kooks headers/x-pipe,GT500 OA pipes,Roush mufflers.
2002 F250 Lariat,dark shadow gray,gray leather,CCSB,4x4,7.3 diesel,auto,lots of mods.
2017 Explorer XLT,canyon ridge,black cloth,AWD,2.3 Ecoboost,K&N filter
2010 Flex Limited,ingot silver,black leather,AWD,3.5 Ecoboost,AFE filter,HD brakes
2014 Honda Pioneer 700-4,'89 Yamaha Blaster
Kubota B7800,30hp diesel,AG tires,front loader,box blade
10" will only work with a 6.5" BS on your Fox, Nate could use less BS and be fine on the Cobra, rear Cobra brakes might be close near banjo bolt/parking brake bracket though.
-J
'91 LX Bimini Blue
427"/88mm on 16psi
'99 Contour SVT
Clean DD
I am going to be selling my Weld Pro Stars. but only as a set of 4.
3-1/2w with tires front
10w--6.5 bs has 325-50-15 bfg drag radials (can take off)has rim screws.
1969 Camaro restomod/project
1967 camaro
2011 mustang procharged
93 reef blue notch blk/int
92 calypso notch blk/int
86 t-type
1972 chevelle project
Not only did I fail at building a fast mustang but I bought a yellow zo6 cause I couldn't get my little dick up.
mine have a 6.5 back spacing first 225 takes em home
they have the holes for rim screws as well
1989 GT Black,full 16 pt MOLY 8.50 CERT.
461w Dart block w/ 4 bolt-all 5 caps
EAGLE PENDULUM CUT ESP ARMORED 4.250
PROBE PISTONS
PROBE BILLET I BEAM
super victor
230cc CNC
Hooker 2 in headers
pa sc c4, 4600 stall
9" LADDER 3.70 PRO GEARS
SW BACKHALF
moser 35 SPLINE axles
1050 RACE DOMINATOR DEMON
250 FOGGER KIT
snow performance stage 2
1.316 60ft 9.16@156
i have 1/4" wheel spacers he could use if he wanted
1989 GT Black,full 16 pt MOLY 8.50 CERT.
461w Dart block w/ 4 bolt-all 5 caps
EAGLE PENDULUM CUT ESP ARMORED 4.250
PROBE PISTONS
PROBE BILLET I BEAM
super victor
230cc CNC
Hooker 2 in headers
pa sc c4, 4600 stall
9" LADDER 3.70 PRO GEARS
SW BACKHALF
moser 35 SPLINE axles
1050 RACE DOMINATOR DEMON
250 FOGGER KIT
snow performance stage 2
1.316 60ft 9.16@156
10" wheel with 6.5" is fine on a Fox but will require outer fenders rolled and some mild hammer work on the inside.
The 1/4" spacer can actually help but makes it closer to outer lip, so you can't be too much lowered or not have fender lips rolled.
10" with 6.5" BS and a 1/4" spacer for trial fitting is the way to go.
-J
'91 LX Bimini Blue
427"/88mm on 16psi
'99 Contour SVT
Clean DD
Posting Permissions
Reply With Quote
Bookmarks