Page 1 of 2 12 LastLast
Results 1 to 20 of 25

Thread: Please help identify this electrical part:

  1. #1
    Cheap SOB
    Join Date
    Feb 2007
    Location
    Baltimore, Maryland 21236
    Posts
    288

    Please help identify this electrical part:

    It is a 4 x 4 black box under the passenger seat. It has two wires and a ground lead coming out of it. The ground is black and the other wires are red and yellow. The part number on the tag is E7ZF-AA-19A087. This is out of an 87 Mustang 5.0 LX. THANKS.

  2. #2
    Not Bad for 367 SAE RWHP Pure Stock's Avatar
    Join Date
    Aug 2006
    Posts
    3,499
    Quote Originally Posted by DRRummel View Post
    It is a 4 x 4 black box under the passenger seat. It has two wires and a ground lead coming out of it. The ground is black and the other wires are red and yellow. The part number on the tag is E7ZF-AA-19A087. This is out of an 87 Mustang 5.0 LX. THANKS.
    Amplifier for radio?
    2011 Mustang GT, MT-82, 3.73's :

    BONE STOCK 12.223@115.18

  3. #3
    Banned
    Join Date
    Sep 2006
    Posts
    329
    Modulator?

  4. #4
    Just spank it!!! Viper_ed's Avatar
    Join Date
    Aug 2006
    Location
    Fayette City, PA
    Posts
    5,841
    Picture would help. That is a Ford Part number, but there was never anything mounted under the Passenger Seat from the factory on a 87 Mustang.

  5. #5
    Senior Member
    Join Date
    Aug 2006
    Location
    Farmington WV
    Posts
    4,672
    http://fordparts.com/cart/?pn=E7ZF-19A087-AA

    i tried it there and it comes back with nothing. the E7 definately means 87.....however...normally the 'AA' is at the end of the number. i tried it both ways.

  6. #6
    Senior Member blkp42e's Avatar
    Join Date
    Oct 2006
    Location
    North Hills
    Posts
    1,229
    Quote Originally Posted by Viper_ed View Post
    Picture would help. That is a Ford Part number, but there was never anything mounted under the Passenger Seat from the factory on a 87 Mustang.

    yes there is. i just had my seat out. is it for power lumbar maybe?

  7. #7
    Just spank it!!! Viper_ed's Avatar
    Join Date
    Aug 2006
    Location
    Fayette City, PA
    Posts
    5,841
    Quote Originally Posted by blkp42e View Post
    yes there is. i just had my seat out. is it for power lumbar maybe?
    Everything for the Lumbar is in the seat itself. Of the 30 or so of these cars I have torn apart, I have NEVER seen anything under the passenger seat!



  8. #8
    Senior Member blkp42e's Avatar
    Join Date
    Oct 2006
    Location
    North Hills
    Posts
    1,229
    i'll try to snap a pic later... mine was also screwed into the floorboard.

    where i circled is where it sits. as for the amplifier guess? my car had the 7band equalizer too, maybe that could be part of it also?
    Attached Images Attached Images

  9. #9
    Just spank it!!! Viper_ed's Avatar
    Join Date
    Aug 2006
    Location
    Fayette City, PA
    Posts
    5,841
    Quote Originally Posted by blkp42e View Post
    i'll try to snap a pic later... mine was also screwed into the floorboard.

    where i circled is where it sits. as for the amplifier guess? my car had the 7band equalizer too, maybe that could be part of it also?
    Amplifier mounts to the tranny tunnel behind the radio. Refered to as the "football" because of its shape. I don't see why a equalizer would need a seperate remote box for it, but I have never seen a fox that had one in it. Did it have its own wiring harness? I haven't even ever seen a wiring harness that had an extra plug under the drivers seat.

  10. #10
    Senior Member
    Join Date
    Aug 2006
    Location
    Farmington WV
    Posts
    4,672
    flux capacitor

  11. #11
    Cheap SOB
    Join Date
    Feb 2007
    Location
    Baltimore, Maryland 21236
    Posts
    288
    Quote Originally Posted by blkp42e View Post
    i'll try to snap a pic later... mine was also screwed into the floorboard.

    where i circled is where it sits. as for the amplifier guess? my car had the 7band equalizer too, maybe that could be part of it also?
    BLKP42E is has the location right. That is exactly where the 'unit' was located. I will try to post a picture tonight. I also have the 7 band EQ, but I would be surprised if Ford put audio stuf under the seat. I agree, it should be on the tunnel.

  12. #12
    Cheap SOB
    Join Date
    Feb 2007
    Location
    Baltimore, Maryland 21236
    Posts
    288
    Called Ford. Nice parts guy at Bob Davidson said... Number sounds right,...but no listing. He also said the the 19xxx seriers of numbers sound like AC or Heating parts.
    Picuters are pending. I may also visit the dealer and Corral.net.

  13. #13
    Cheap SOB
    Join Date
    Feb 2007
    Location
    Baltimore, Maryland 21236
    Posts
    288
    Consensus at MetroAreaMustangsandFords is that it is the amp for the premium Stereo. Pics pending for tonight.

  14. #14
    On the down low cam303's Avatar
    Join Date
    Aug 2006
    Posts
    978
    It is the amp for the radio. That is exactly where mine was in the 93.

  15. #15
    Just spank it!!! Viper_ed's Avatar
    Join Date
    Aug 2006
    Location
    Fayette City, PA
    Posts
    5,841
    Quote Originally Posted by cam303 View Post
    It is the amp for the radio. That is exactly where mine was in the 93.
    Did your's have the EQ as well? If so, I guess I learned something new today!

  16. #16
    On the down low cam303's Avatar
    Join Date
    Aug 2006
    Posts
    978
    No....There was no EQ on the premium sound in 93. The 93 radio's are different than the 92 and down.
    I did have the premium sound though.

  17. #17
    Just spank it!!! Viper_ed's Avatar
    Join Date
    Aug 2006
    Location
    Fayette City, PA
    Posts
    5,841
    Quote Originally Posted by cam303 View Post
    No....There was no EQ on the premium sound in 93. The 93 radio's are different than the 92 and down.
    I did have the premium sound though.
    Hugh? Wonder why they moved the amp from behind the radio on the tranny tunnel to there?

  18. #18
    On the down low cam303's Avatar
    Join Date
    Aug 2006
    Posts
    978
    Probably because it is cooler there.

  19. #19
    Just spank it!!! Viper_ed's Avatar
    Join Date
    Aug 2006
    Location
    Fayette City, PA
    Posts
    5,841
    Quote Originally Posted by cam303 View Post
    Probably because it is cooler there.
    But this guy had it on a 87. Just doesn't make sense that Ford would have to modify 2 different wiring harnesses to put it there since all the wires were in the dash wiring with it mounted behind the radio.

  20. #20
    Cheap SOB
    Join Date
    Feb 2007
    Location
    Baltimore, Maryland 21236
    Posts
    288

Similar Threads

  1. Coilovers, can you identify these
    By madmaxin22 in forum General Tech
    Replies: 4
    Last Post: 06-12-2014, 08:42 AM
  2. Identify this clutch
    By Warrior1670 in forum General Tech
    Replies: 1
    Last Post: 05-18-2011, 11:17 AM
  3. can someone identify this part
    By 97LaserRed in forum The Bar
    Replies: 7
    Last Post: 03-01-2010, 08:17 PM
  4. how to identify 2.3 vs 2.5 ranger motor?
    By 1badnotch in forum Fox-SN95
    Replies: 5
    Last Post: 08-03-2008, 05:01 PM
  5. help me identify this FPR
    By White5.0 in forum Fox-SN95
    Replies: 19
    Last Post: 07-27-2008, 03:10 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •