Someone save me some search/google time and tell me what is needed to do this swap? So far I have:
engine/trans
harness
computer
anything else needed?
Someone save me some search/google time and tell me what is needed to do this swap? So far I have:
engine/trans
harness
computer
anything else needed?
Beer.
Hydroboost....k member is the same
03 Torch Red Anni. Ed. Cobra
11 Grabber Blue 5.0, 3D500 spoiler, CS valance, GT premium, interior upgrade package, Brembos, MT-82 and Whipple powered SOLD
01 cobra: traded
93 LX Modular 4v swap
Sean Hyland Motorsport forged rotating assembly, Teksid block, 01 cobra heads, cams and intake SOLD
LOL... im with ya on that!Originally Posted by ModularMike
awesome... thanks! :)
you sure about the hydraboost??
Im 99% positive you need a hydraboost. the v6 have the big ass vac, booster
you will need a rad, coolant tank, all the hoses Including heater core,and the accesories, Power steering pump, a/c, alt, etc.
tranny with wiring harness, possibly new fuel lines, throttle cables, coil packs, power steering hoses, motor mounts, a/c lines, and more. thats all I can think of off the top of my head..
lol he will need somthing a little more heavy than that.... you will need some hard drinks with all the headache...
no no i mean he needs the hydrobooster and the K member is the same
03 Torch Red Anni. Ed. Cobra
11 Grabber Blue 5.0, 3D500 spoiler, CS valance, GT premium, interior upgrade package, Brembos, MT-82 and Whipple powered SOLD
01 cobra: traded
93 LX Modular 4v swap
Sean Hyland Motorsport forged rotating assembly, Teksid block, 01 cobra heads, cams and intake SOLD
you'll need to do something with the PATS as well unless you have the keys and gauge cluster from the car you took the computer from
03 Torch Red Anni. Ed. Cobra
11 Grabber Blue 5.0, 3D500 spoiler, CS valance, GT premium, interior upgrade package, Brembos, MT-82 and Whipple powered SOLD
01 cobra: traded
93 LX Modular 4v swap
Sean Hyland Motorsport forged rotating assembly, Teksid block, 01 cobra heads, cams and intake SOLD
i didnt have any problem with the pats system on mine? 99+ might be different?
You have a tune......they would have tuned it out. Thats what i did too
03 Torch Red Anni. Ed. Cobra
11 Grabber Blue 5.0, 3D500 spoiler, CS valance, GT premium, interior upgrade package, Brembos, MT-82 and Whipple powered SOLD
01 cobra: traded
93 LX Modular 4v swap
Sean Hyland Motorsport forged rotating assembly, Teksid block, 01 cobra heads, cams and intake SOLD
o0o00o0o00o0o0 ya im not sure how the computer side of it works lol
lol
yeah the 96-98 computers have it too but its a separate module, in 99 it went integrated into the gauge cluster. if you keep all the stuff matched that was mated: key, module/cluster, and computer the car will start......or the computer can be tuned to ignore it.
03 Torch Red Anni. Ed. Cobra
11 Grabber Blue 5.0, 3D500 spoiler, CS valance, GT premium, interior upgrade package, Brembos, MT-82 and Whipple powered SOLD
01 cobra: traded
93 LX Modular 4v swap
Sean Hyland Motorsport forged rotating assembly, Teksid block, 01 cobra heads, cams and intake SOLD
got cha
Might be able to get a 97 GT for cheap (3k). Does the IRS from the 01, 03-04 cobras swap in?
yes it should.... im 90% sure lol
It will, but I was thinking the wheel spacing is slightly different. Can't remember if it sits them in or out farther.
Yes it does
its a pretty straight forward swap drill some holes on the subframe and bolt the mounts on. Ive never done the swap myself but i read into it alot to swap into my foxbody
03 Torch Red Anni. Ed. Cobra
11 Grabber Blue 5.0, 3D500 spoiler, CS valance, GT premium, interior upgrade package, Brembos, MT-82 and Whipple powered SOLD
01 cobra: traded
93 LX Modular 4v swap
Sean Hyland Motorsport forged rotating assembly, Teksid block, 01 cobra heads, cams and intake SOLD
Posting Permissions
Reply With Quote
Bookmarks