My 03 Mineral Grey GT

**no1fordgirl** · 12-13-2010, 12:08 AM

Your GT looks great, even stock. It takes a while to get it where ya want it. Ive had mine for 4 years now and still haven't gotten around to lowering it (Soon I hope LOL) but the wider wheels make a huge difference!

Rob's GT is awesome ;) Looks great and sounds even better.

**95V6** · 12-13-2010, 01:36 AM

Yeah, I don't like to wait though. Hardist part is finding good deals with in budget. haha

**VaderGT** · 12-13-2010, 09:48 AM

i think these would look sweet
http://www.cruizinconceptswholesale....H18X9OMEGA24MM

can get the 18x9 front and 18x10 rear for staggered

**2000GT** · 12-13-2010, 10:24 AM

Nice looking car

**Stangman701** · 12-13-2010, 01:33 PM

Congrats on the upgrade

**Steve-0** · 12-13-2010, 01:59 PM

Car looks good! Congrats on moving up in the mustang world! And I agree, lowering should be one of the first things done to a mustang. 4X4=ghey

**95V6** · 12-13-2010, 03:31 PM

Originally Posted by VaderGT

i think these would look sweet
http://www.cruizinconceptswholesale....H18X9OMEGA24MM

can get the 18x9 front and 18x10 rear for staggered

Cant afford 250 a wheel plus tires. Look cool tho!

Originally Posted by 2000GT

Nice looking car

Thanks

Originally Posted by Stangman701

Congrats on the upgrade

Thanks

Originally Posted by Steve-0

Car looks good! Congrats on moving up in the mustang world! And I agree, lowering should be one of the first things done to a mustang. 4X4=ghey

Yes the fender gap drives me insane. The stock stance is horrible, whats a good kit that wont kill my wallet?

**cwh19** · 12-13-2010, 03:36 PM

Originally Posted by 95V6

Yes the fender gap drives me insane. The stock stance is horrible, whats a good kit that wont kill my wallet?

Get a used set. Usually like 120 or so shipped for a set if you keep your eye open. Corral.net is the best place to buy/sell stuff for these carss.

**95V6** · 12-13-2010, 03:41 PM

Im on Corral and a few others and I never run across what I want. Or if I do the price is through the roof and might as well by new. From looking at AmericanMuscle it looks like $250-300 will get me at least 1.5" front and rear. I am still thinking about cutting the stock springs, ive read thread after thread in both sides of the argument. I figure if I want to get springs anyway but not right now just see.

**cwh19** · 12-13-2010, 03:46 PM

Originally Posted by 95V6

Im on Corral and a few others and I never run across what I want. Or if I do the price is through the roof and might as well by new. From looking at AmericanMuscle it looks like $250-300 will get me at least 1.5" front and rear. I am still thinking about cutting the stock springs, ive read thread after thread in both sides of the argument. I figure if I want to get springs anyway but not right now just see.

If you cut them right, its fine. If you use a torch or any sort of heat it'll change the spring rate and give you the ricer bounce. But like a sawzaw would be fine. Its definitely the cheapest.

**95V6** · 12-13-2010, 04:01 PM

Yes, I would like to do it.

**VaderGT** · 12-13-2010, 04:33 PM

what about americanmuscle..they got some cheap prices on wheels
http://www.americanmuscle.com/mustangwheels.html

**GOT SVT** · 12-13-2010, 04:39 PM

nice pickup, my buddy bought a similar car earlier this

buy these rims, almost a bogo free, lol

http://www.steelcitystangs.com/forum...ighlight=fr500

**Steve-0** · 12-13-2010, 06:15 PM

My car has cut coils on it. PO cut a full coil off in the front and I think 3/4 of one in the rear. Rides great for being so low, just have to know where all those bumps in the road are!

**Shorty429** · 12-13-2010, 07:04 PM

Godspeed Omega wheels...they look so sick on the new edge GTs

**Stroked03Cobra** · 12-13-2010, 09:25 PM

Originally Posted by Shorty429

Godspeed Omega wheels...they look so sick on the new edge GTs

That they do! Wish they came 10.5's though! Deff DSG, loved my 02 MG I had but both are great colors!

**biminiLX** · 12-13-2010, 10:52 PM

Cobra pic I added above had cut front Eibach coils to even front/rear.
I called Eibach before I did it, did it slow with a hacksaw :), cut-off wheel would have been nicer, then painted the cut exposed metal.
Cutting springs is fine if done slowly without heating.
-J

**GEARHEAD94** · 12-13-2010, 10:56 PM

Congrats on the nice Stang. How is it getting around with this weather? Try painting those starfish wheels black. I have seen a couple of people paint them.Here are a set of Saleen's.

**95V6** · 12-14-2010, 01:06 AM

Originally Posted by Steve-0

My car has cut coils on it. PO cut a full coil off in the front and I think 3/4 of one in the rear. Rides great for being so low, just have to know where all those bumps in the road are!

Yeah, but I think stock Cobra springs and stock GT springs are differnt. Differnt spring rate or something. Ive read threads that guys cut stock GTs, if I did I would do 1 coil off each. I have a new cut off wheel I have yet to use so.....

Originally Posted by GEARHEAD94

Congrats on the nice Stang. How is it getting around with this weather? Try painting those starfish wheels black. I have seen a couple of people paint them.Here are a set of Saleen's.

That is perfection. I Love it, wish I could go with that set up.