OK guys, I am selling my compete blower set up With the intercooler. It could go a few different ways but I dont really want to seperate unless buyers are lined up for everything. Its a passenger mount Vortech V-1 S trim. Comes with modified volute. Cut then welded straight to go through the fender for the intercooler. TiAL 50mm Q BOV, 8" lower ASP pulley with 3.33 upper...This builds boost faster in the lower rpm range... New blower belt, new accessory drive belt. Those both come also. ASP Smog eliminator pulley. ASP tensioner for the blower. Cant remember off hand the dimensions of the intercooler but I "thimk" its a 33X12X3 with 3" ends on it. All T bolt clamps. Mac 1 3/4 long tube headers with black DEI wrap. Custom H pipe. All bolts together to your cat back system. Basically a bolt on intercooled blower set up. All you need is a 7" mass air meter.
***Note*** this is for a driver side throttle body. Edelbrock and stock intakes can be flipped easy. Others also I am sure but not sure on which ones. My engine runs very efficiently with good heads and flow. I have seen over 15 PSI boost and I know it makes 20 at higher RPM for the people who just want to know boost numbers...which mean nothing but restriction...
This kit is for a Fox body. I know I have left a few things out and will update or add as I remember. Any questions please ask. If there is no salt on the roads I can give a ride or atleast start it for whoever is SERIOUSLEY interested. Dont low ball me, dont waste my time and dont bring your tire kicking shoes either.
I cant get pics to load so I have to either email them or text them. You can also look at my "wire tuck" thread which is located here at the "in the garage" section.
Looking for $2800.
Reply With Quote
Originally Posted by Mater
Bookmarks