Page 2 of 6 FirstFirst 1234 ... LastLast
Results 21 to 40 of 106

Thread: Trans Am. Open Headers.

  1. #21
    Senior Member scott5's Avatar
    Join Date
    Sep 2006
    Location
    NC
    Posts
    10,168
    Quote Originally Posted by Nsty98LS1 View Post
    thanks guys. Troy, there are a bunch of LS1 categories & there are also some gray areas in them also. there is Stock Internal, where anything goes as long as the internals are stock. then Cam Only which permits the cam & valvetrain to be upgraded. the new current record for Cam Only is 9.98. then there is Head/Cam which obviously allows heads. as far as i know, Texas Speed hold the record for Head/Cam with a 9.66
    I think what troy is asking/saying is dont you have an intake/cam car? Cam only would be a stock intake/stock heads +valvetrain/stock bottom end and just an aftermarket cam, correct? I could be and probably am wrong

  2. #22
    formerly Nsty98LS1
    Join Date
    Jun 2008
    Location
    Lilly, PA
    Posts
    549
    the Cam only, means the only internal changes to the motor can be the cam & valvetrain. i would be interested to see somebody run a cam as big as mine with stock pushrods & springs though. nobody has ever said anything about an intake or any other bolt-ons, which means that if i really wanted to, i could run a Victor Jr. style intake or even a sheetmetal intake & still be classified as Cam Only. basically the intake has no bearing on any of the categories.
    '13 IOM Camaro 2SS/RS: 3 pedals & needing a driver mod

  3. #23
    Senior Member
    Join Date
    Feb 2009
    Posts
    141
    Quote Originally Posted by Nsty98LS1 View Post
    the Cam only, means the only internal changes to the motor can be the cam & valvetrain. i would be interested to see somebody run a cam as big as mine with stock pushrods & springs though. nobody has ever said anything about an intake or any other bolt-ons, which means that if i really wanted to, i could run a Victor Jr. style intake or even a sheetmetal intake & still be classified as Cam Only. basically the intake has no bearing on any of the categories.
    cam only means cam only. if the intake doesn't matter than put a ls1 intake on your car with egr and all and see how fast it is. and what catergories are you getting these from. if you put a sheetmetal intake or victor jr. it does matter and its not just a cam only car then RIGHT or WRONG.?

  4. #24
    formerly Nsty98LS1
    Join Date
    Jun 2008
    Location
    Lilly, PA
    Posts
    549
    Quote Originally Posted by 92gearhead View Post
    cam only means cam only. if the intake doesn't matter than put a ls1 intake on your car with egr and all and see how fast it is. and what catergories are you getting these from. if you put a sheetmetal intake or victor jr. it does matter and its not just a cam only car then RIGHT or WRONG.?
    hey Harrer, go to LS1Tech & check out the categories for yourself. if that was the case, then maybe there would be a intake only class. what are you shooting for anyway, slowest head, cam, intake & spray car. lol
    '13 IOM Camaro 2SS/RS: 3 pedals & needing a driver mod

  5. #25
    formerly Nsty98LS1
    Join Date
    Jun 2008
    Location
    Lilly, PA
    Posts
    549
    btw Andy, my car didn't come with a LS1 intake or EGR so why would i have to run that?
    '13 IOM Camaro 2SS/RS: 3 pedals & needing a driver mod

  6. #26
    KB snake
    Join Date
    Jul 2008
    Location
    altoona pa
    Posts
    527
    Rules according to ls1tech say any intake can be used. Which since thats the website that holds and documents the records thats the rules everyone follows. Not a single person to my knowledge on the top 20 list did it with a stock intake or with a giant cam with stock springs and retainers.

  7. #27
    Senior Member
    Join Date
    Feb 2009
    Posts
    141
    Quote Originally Posted by Nsty98LS1 View Post
    hey Harrer, go to LS1Tech & check out the categories for yourself. if that was the case, then maybe there would be a intake only class. what are you shooting for anyway, slowest head, cam, intake & spray car. lol
    listen here gay boy i was just saying that if you have an aftermarket intake that you no longer have a cam only car that is fact no matter how anyone looks at it including LS1tech which i NORMALLY agree with. but they are wrong on that subject. And since you want to get into it i have still gone faster than you. no matter how i got there im still faster so say what you want im still faster

  8. #28
    formerly Nsty98LS1
    Join Date
    Jun 2008
    Location
    Lilly, PA
    Posts
    549
    Quote Originally Posted by 92gearhead View Post
    listen here gay boy i was just saying that if you have an aftermarket intake that you no longer have a cam only car that is fact no matter how anyone looks at it including LS1tech which i NORMALLY agree with. but they are wrong on that subject. And since you want to get into it i have still gone faster than you. no matter how i got there im still faster so say what you want im still faster
    you wanna name call, ****er, there is no intake restriction making it irrelevant as to what intake i want to use. so to be "cam only" i guess i have to follow the Harrer rules it seems. you may have gone 2 tenths quicker, but with heads, cam, intake & spray, i would certainly hope you could, but the day out at PRP when we were both there, you couldn't get that car to do shit. bring it to me & i'll show you how to make it run, since you can't seem to do it.:upyours:
    '13 IOM Camaro 2SS/RS: 3 pedals & needing a driver mod

  9. #29
    Senior Member
    Join Date
    Feb 2009
    Posts
    141
    Quote Originally Posted by Nsty98LS1 View Post
    you wanna name call, ****er, there is no intake restriction making it irrelevant as to what intake i want to use. so to be "cam only" i guess i have to follow the Harrer rules it seems. you may have gone 2 tenths quicker, but with heads, cam, intake & spray, i would certainly hope you could, but the day out at PRP when we were both there, you couldn't get that car to do shit. bring it to me & i'll show you how to make it run, since you can't seem to do it.:upyours:
    i agree you can drive a stick better than me that's why im getting rid of but im still faster haha

  10. #30
    KB snake
    Join Date
    Jul 2008
    Location
    altoona pa
    Posts
    527
    Ok if your trying to make it on the top 20 LS1tech cam only list. Wouldnt it make sense that LS1tech rules would apply. Makes sense to me.

  11. #31
    formerly Nsty98LS1
    Join Date
    Jun 2008
    Location
    Lilly, PA
    Posts
    549
    Quote Originally Posted by 92gearhead View Post
    i agree you can drive a stick better than me that's why im getting rid of but im still faster haha
    from what i read on here, you handle a stick better than anyone! :D thats just the rumor going around on here. lmao
    '13 IOM Camaro 2SS/RS: 3 pedals & needing a driver mod

  12. #32
    formerly Nsty98LS1
    Join Date
    Jun 2008
    Location
    Lilly, PA
    Posts
    549
    Quote Originally Posted by wickedsnake03 View Post
    Ok if your trying to make it on the top 20 LS1tech cam only list. Wouldnt it make sense that LS1tech rules would apply. Makes sense to me.
    i would think so. otherwise it would be just like the stupid plate races. lol
    '13 IOM Camaro 2SS/RS: 3 pedals & needing a driver mod

  13. #33
    Junkyard in junkyard out. ModularMike's Avatar
    Join Date
    Jun 2007
    Location
    Pittsburgh, PA
    Posts
    2,108
    Gotta run stock manifolds too.


  14. #34
    formerly Nsty98LS1
    Join Date
    Jun 2008
    Location
    Lilly, PA
    Posts
    549
    Quote Originally Posted by ModularMike View Post
    Gotta run stock manifolds too.
    if i don't, does that make it a racecar instead of a streetcar?
    '13 IOM Camaro 2SS/RS: 3 pedals & needing a driver mod

  15. #35
    Senior Member
    Join Date
    Jan 2010
    Posts
    170
    Quote Originally Posted by Nsty98LS1 View Post
    if i don't, does that make it a racecar instead of a streetcar?
    lol for sure...get the stockers on jay!

  16. #36
    formerly Nsty98LS1
    Join Date
    Jun 2008
    Location
    Lilly, PA
    Posts
    549
    consider it done already Dylan. lol just as long as nobody looks under the car & i never open the hood, it'll be "stock"
    '13 IOM Camaro 2SS/RS: 3 pedals & needing a driver mod

  17. #37
    Senior Member
    Join Date
    Jan 2010
    Posts
    170
    lol i hear ya.. car souds great, the fast looks awesome on there cant wait to see what that thing runs this year!!

  18. #38
    Junkyard in junkyard out. ModularMike's Avatar
    Join Date
    Jun 2007
    Location
    Pittsburgh, PA
    Posts
    2,108
    Quote Originally Posted by Nsty98LS1 View Post
    if i don't, does that make it a racecar instead of a streetcar?
    Its a racecar already so either way your screwed.


  19. #39
    Senior Member wick's Avatar
    Join Date
    Sep 2006
    Location
    Carnegie
    Posts
    8,400
    Quote Originally Posted by 92gearhead View Post
    i agree you can drive a stick better than me that's why im getting rid of but im still faster haha
    Is that why Adam has the plate?
    Rob
    1 Monte SS. White.

    Banned dates
    11/27/08
    4/25/11
    3/28/12
    12/1/12
    There are more but that's all that was logged!!!

  20. #40
    Tripedalist yeahloh95's Avatar
    Join Date
    Aug 2006
    Location
    Everett, Pa
    Posts
    5,065
    what is this ls1tech you speak of ?????
    Troy
    95 gt 11.3 @ 126
    68 f100 SB soon to be coyote powered
    12 GT 6m cobra jet powered 11.4 @124
    90 lx supercharged 440 rwhp on 8 lbs
    17 f150 crew cab coyote powered

    PEOPLE HAVE MORE FUN THAN ANYONE

Similar Threads

  1. Open trailer
    By 03 OW SVT in forum Ford Vehicles
    Replies: 17
    Last Post: 09-21-2014, 05:29 PM
  2. Anybody got an open carfax right now?
    By Troll in forum The Bar
    Replies: 0
    Last Post: 08-05-2009, 11:51 PM
  3. 04 Mach 1 manual trans vs. S197 manual trans.
    By Pure Stock in forum Drag Racing
    Replies: 4
    Last Post: 01-19-2008, 02:37 AM
  4. Open H-pipe
    By Mr. Rob in forum SN95-New Edge
    Replies: 4
    Last Post: 08-05-2007, 11:52 AM
  5. Us Open????
    By PHFIRENO7783 in forum The Bar
    Replies: 14
    Last Post: 06-13-2007, 09:55 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •