Results 1 to 20 of 50

Thread: Cobra is at Lasota Racing!!!!!!!!!

Hybrid View

  1. #1
    Big Daddy gmkillr's Avatar
    Join Date
    Aug 2006
    Location
    At the racetrack
    Posts
    4,193

    Cobra is at Lasota Racing!!!!!!!!!

    We'll I hauled my Cobra out to Lasota's this saturday, thanks to Bill (Rio94gt) for lending me his trailer to haul it out. Took me about 3hours to get there, not to bad. They are going to be road testing my car to get the initial tune setup so that we dont have to have the car on the dyno forever to get it dialed in. I'll be getting a few different tunes done using the SCT chip.
    tune 1- regular 93 octane
    tune 2- regular 93 octane + 50% meth/50% distilled water injection
    tune 3- rugular 93 octane + 50% meth/50% distilled water injection + 110 race gas

    They are going to be tuning it on the street hooked up to a wideband during the coarse of this week and on saturday March 24 i'll be heading out w/ my buddy who's also getting his truck thrown on the dyno to see what kind of power he's laying down, (should be 450rwhp 800+rwtq) in his 2005 dodge ram diesel. So this saturday I will have my new power #'s. Im really excited & cant wait to see what my car will do. Here's my combo for those that dont know it:

    Stock gt-40 iron heads, Stock cobra intake, upper has been port matched to the lower & 75mm throttle body, the lower intake is stage 2 ported by foxlake racing, proffesional products 75mm t.b. SCT 2800 maf w/ AFM powerstack 10" filter, Morpheus 4" powerpipe, stock cobra 1.7 pedestal mount rockers, Comp Cam double valve springs 165lbs. seat pressure @ 1.850 intalled height w/ 410 open pressure, Camshaft Innovations custom billet cam, comp cams billet timing chain, comp cams lifters, romac 50oz. sfi balancer, Vortech V-1 S-trim w/ 2.85 pulley, BBK 1 5/8 longtube headers w/ 2 1/2" collectors, BBK 2 1/2" offroad h-pipe, Magnaflow 2 1/2" mufflers, 2 1/2" mandrel bent tail pipes, Meziere electric water pump, MSD 6al ignition, MSD coil, MSD plug wires, Walbro 255lph fuel pump gss340, Seimens Deka 60lb. injectors, AFM Mr. Freeze meth/water injection kit. I think thats everything, the shortblock is untouched crank, rods, pistons, brgs all w/ 110,000+ miles, the heads are unported gt-40 irons w/ stock valves & pedestal mount rockers.

    With the small (2.85) pulley I should see anywhere from 15-18lbs. of boost, I'll be sure to post the #'s up when I get them next weekend. If I had any money left over I'd like to go w/ a set of 1 3/4 longtube headers w/ a 3" collectors, and then run a 3" midpipe, w/ 3" mufflers, & dumps.

    Lasota Racing has been top notch w/ everything up to this point and I believe everything will continue to go smoothly, as these guys really know what customer service is about so far. I feel very comfortable w/ my car in their hands, and I cant say that about many people. We'll see how everything finish's up this saturday. Wish the car and I luck....
    Last edited by gmkillr; 03-19-2007 at 12:59 AM.
    Corvette Z06

    Growing up.............Not everyone does it!


  2. #2
    Tripedalist yeahloh95's Avatar
    Join Date
    Aug 2006
    Location
    Everett, Pa
    Posts
    5,065
    that combo sounds great and i can't wait to hear some numbers
    Troy
    95 gt 11.3 @ 126
    68 f100 SB soon to be coyote powered
    12 GT 6m cobra jet powered 11.4 @124
    90 lx supercharged 440 rwhp on 8 lbs
    17 f150 crew cab coyote powered

    PEOPLE HAVE MORE FUN THAN ANYONE

  3. #3
    Not Bad for 367 SAE RWHP Pure Stock's Avatar
    Join Date
    Aug 2006
    Posts
    3,499
    Big power numbers no doubt!
    2011 Mustang GT, MT-82, 3.73's :

    BONE STOCK 12.223@115.18

  4. #4
    2.4 KB & Juice
    Join Date
    Aug 2006
    Location
    Export, PA
    Posts
    844
    Sounds Sick dude, can't wait to see the numbers!!

    Any guess's as to what you expect the numbers to be?
    07 Silverado
    05 R6

    Sold: 03 Cobra, Built motor - 2.4 KB - N2O

  5. #5
    Big Daddy gmkillr's Avatar
    Join Date
    Aug 2006
    Location
    At the racetrack
    Posts
    4,193
    Quote Originally Posted by KBCobra View Post
    Sounds Sick dude, can't wait to see the numbers!!

    Any guess's as to what you expect the numbers to be?

    Im hoping for anything over 450/450 at the wheels.
    Im keeping my fingers crossed!!
    Corvette Z06

    Growing up.............Not everyone does it!


  6. #6
    Senior Member lib88stang's Avatar
    Join Date
    Aug 2006
    Location
    LowHill
    Posts
    2,679
    very cool, keep us posted.

  7. #7
    Kenne Bell Blown 7-UP 9002stang's Avatar
    Join Date
    Aug 2006
    Location
    Imperial
    Posts
    278
    Don will do a great job Im sure. They were great to work with. Its in good hands Im sure.
    2002 GT- Sold
    2003 F-150 ext cab 5.4l v8 4x4
    1990 7-up vert 346rwhp/414rwtq
    08 Polaris/KTM Outlaw 525 IRS

  8. #8
    Senior Member Killercanary's Avatar
    Join Date
    Aug 2006
    Location
    Altoona, PA
    Posts
    2,338
    I'm glad to hear that you made it out Rob with the weather and all. I can't wait to see the results! Tell Don I said hi next time you talk to him, and ask him for a ride in his (now his son's) '95 turbo'd vert!
    -Paul

    1995 GT 'vert
    Best times on old 302 combo:
    12.03 at 112.5mph NA
    Best time with 9:1 compression NA dart block 331 setup:
    11.50 at 121mph
    Dyno'd: 415rwhp/410rwtq


    2004 Z16 commemorative edition Z06
    100% stock: 11.9 at 118mph




Similar Threads

  1. 03 -04 Cobra American Racing Headers & Offroad X Pipe
    By Sonic03snake in forum Ford Vehicles
    Replies: 4
    Last Post: 09-01-2011, 03:35 PM
  2. Cobra wrecks street racing
    By o4c0b|2a in forum Pictures & Videos
    Replies: 10
    Last Post: 09-04-2008, 11:44 PM
  3. M/T E/T Streets Cobra Wheels American Racing Skinnies
    By schiavon8241 in forum Ford Vehicles
    Replies: 14
    Last Post: 07-28-2008, 01:29 PM
  4. New 2008 Ford Racing Cobra Jet Mustang
    By mlowry1260 in forum Drag Racing
    Replies: 5
    Last Post: 07-23-2008, 05:11 PM
  5. lasota racing dyno tune
    By 97LaserRed in forum General Tech
    Replies: 23
    Last Post: 04-29-2008, 09:09 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •