I have a couple of manual boost controllers for sale. Both are lightly used, but used none the less.

The first is a Hallman Pro RX ... for reference a link to a seller ...

http://www.boostcontroller.com/index...26category%3D5

The valve has the ceramic ball (what makes it the "Pro RX"). I do not have the light spring or the vacuum line that came with it. As you can see in the pictures, the o-ring for the bottom fitting will need replaced as it is extruded out. It simply slips on the fitting.

Asking $50.00 picked up (sells for $120.00 new). FWIW, I ran an old design Hallman valve on my older combos forever and loved it. I was chasing boost issues when I put this one on and then took it right off.





The second valve is a Turbo XS high performance boost controller. I really liked this style of valve as you can adjust both the set point pressure as well as the bleed rate. (primary and secondary pressure) This is a really nice controller (even though the name is ricey).

For reference a link to the product from a seller ...

http://www.boostcontroller.com/index...6category%3D26

Also asking $50.00 picked up (sells for $110.00 new)







Let me know if there are any questions on either of them.