Results 1 to 17 of 17

Thread: Wanted: Misc. engine & exhaust parts for 93 5.0

  1. #1
    SCS Founder Sonic03snake's Avatar
    Join Date
    Aug 2006
    Location
    Mt Pleasant, PA
    Posts
    4,905

    Wanted: Misc. engine & exhaust parts for 93 5.0

    I know some of this stuff is a longshot but I figure it cant hurt to try. Looking for the following for a 93 5.0 LX im putting together.

    nice stock LX catback
    mint OE h-pipe
    mass air meter & bracket
    spark plug wire clips (Ones on the valve cover bolts)
    Calypso green stock hood
    Clean stock upper / lower rear control arms

    Let me know what you have and how much.
    Lou
    Best non ported stock pullied eaton pass
    1.50 60ft 11.160@ 125.08

    New combo,
    Ported Eaton, upper/lower
    508 Hp 548 TQ SAE on an inferior Dynojet Dyno
    1.43 60 ft. 10.55 @ 130 MPH

    WFC 8 Mod Motor Winner
    06 NMRA Martin, Mi. Mod Muscle Winner

  2. #2
    No Traction due to Paxton PaxtonShelby's Avatar
    Join Date
    May 2007
    Location
    Moon Township
    Posts
    11,377
    I have a set of stock headers from a '94-'95 5.0. They have the threaded nipple on the passenger header. Let me know if you're interested. Cheap cheap cheap!! :D
    2014 GT Premium - Sterling Gray Metallic - MT82 - Track Pack - Glass Roof - Recaro seats - Spoiler delete
    12.76 @ 114.04 bone stock. Koni yellow coil-overs, BMR watts, LCA and LCA relo brackets, Borla S-type axle back.

    1966 Coupe - 331 stroker - Bullet custom roller cam - cam and motor installed and dyno tuned by Rodeheavers Hot Rod - Astro A5 - McLeod RXT - 486 to the wheels - more fun than my little tires can handle

    1966 Oldsmobile Toronado - currently NOT on jackstands

  3. #3
    SCS Founder Sonic03snake's Avatar
    Join Date
    Aug 2006
    Location
    Mt Pleasant, PA
    Posts
    4,905
    Quote Originally Posted by PaxtonShelby View Post
    I have a set of stock headers from a '94-'95 5.0. They have the threaded nipple on the passenger header. Let me know if you're interested. Cheap cheap cheap!! :D
    I had thought about those when you mentioned them when I was down last week. Ill let you know.
    Lou
    Best non ported stock pullied eaton pass
    1.50 60ft 11.160@ 125.08

    New combo,
    Ported Eaton, upper/lower
    508 Hp 548 TQ SAE on an inferior Dynojet Dyno
    1.43 60 ft. 10.55 @ 130 MPH

    WFC 8 Mod Motor Winner
    06 NMRA Martin, Mi. Mod Muscle Winner

  4. #4
    Senior Member lib88stang's Avatar
    Join Date
    Aug 2006
    Location
    LowHill
    Posts
    2,679
    I may have the stock headers, and the mass air bracket and intake plate try hopwood j/y

  5. #5
    SCS Founder Sonic03snake's Avatar
    Join Date
    Aug 2006
    Location
    Mt Pleasant, PA
    Posts
    4,905
    Quote Originally Posted by lib88stang View Post
    I may have the stock headers, and the mass air bracket and intake plate try hopwood j/y
    Ill call you later. I got a few things at the JY.
    Lou
    Best non ported stock pullied eaton pass
    1.50 60ft 11.160@ 125.08

    New combo,
    Ported Eaton, upper/lower
    508 Hp 548 TQ SAE on an inferior Dynojet Dyno
    1.43 60 ft. 10.55 @ 130 MPH

    WFC 8 Mod Motor Winner
    06 NMRA Martin, Mi. Mod Muscle Winner

  6. #6
    No Traction due to Paxton PaxtonShelby's Avatar
    Join Date
    May 2007
    Location
    Moon Township
    Posts
    11,377
    Quote Originally Posted by Sonic03snake View Post
    I had thought about those when you mentioned them when I was down last week. Ill let you know.
    Sounds good. Have a good weekend!
    2014 GT Premium - Sterling Gray Metallic - MT82 - Track Pack - Glass Roof - Recaro seats - Spoiler delete
    12.76 @ 114.04 bone stock. Koni yellow coil-overs, BMR watts, LCA and LCA relo brackets, Borla S-type axle back.

    1966 Coupe - 331 stroker - Bullet custom roller cam - cam and motor installed and dyno tuned by Rodeheavers Hot Rod - Astro A5 - McLeod RXT - 486 to the wheels - more fun than my little tires can handle

    1966 Oldsmobile Toronado - currently NOT on jackstands

  7. #7
    Senior Member lib88stang's Avatar
    Join Date
    Aug 2006
    Location
    LowHill
    Posts
    2,679
    Quote Originally Posted by Sonic03snake View Post
    Ill call you later. I got a few things at the JY.
    I know where a set of nice control arms are also.

  8. #8
    Nothing clever to say.... jaa55's Avatar
    Join Date
    Sep 2007
    Location
    Dayton PA
    Posts
    3,795
    hey lou i have a near brand new set of flowmaster tail pipes, prob 1000 miles on them not stock but might be the right price for you!
    03 Torch Red Anni. Ed. Cobra

    11 Grabber Blue 5.0, 3D500 spoiler, CS valance, GT premium, interior upgrade package, Brembos, MT-82 and Whipple powered SOLD

    01 cobra: traded

    93 LX Modular 4v swap
    Sean Hyland Motorsport forged rotating assembly, Teksid block, 01 cobra heads, cams and intake SOLD

  9. #9
    No Traction due to Paxton PaxtonShelby's Avatar
    Join Date
    May 2007
    Location
    Moon Township
    Posts
    11,377
    Lou - $10 and those headers are yours. The garage is almost clean and I just want them gone. LMK.
    2014 GT Premium - Sterling Gray Metallic - MT82 - Track Pack - Glass Roof - Recaro seats - Spoiler delete
    12.76 @ 114.04 bone stock. Koni yellow coil-overs, BMR watts, LCA and LCA relo brackets, Borla S-type axle back.

    1966 Coupe - 331 stroker - Bullet custom roller cam - cam and motor installed and dyno tuned by Rodeheavers Hot Rod - Astro A5 - McLeod RXT - 486 to the wheels - more fun than my little tires can handle

    1966 Oldsmobile Toronado - currently NOT on jackstands

  10. #10
    Rollin in my 5.0 Shorty429's Avatar
    Join Date
    Apr 2008
    Location
    Greensburg, PA
    Posts
    2,247
    You can have my cat back and headers if you wanted to work out a deal on an aftermarket catback...

    Black
    1998 GT- PI swap, 3.73's, off road h pipe, flows & some suspension goodies

    White 1986 GT T-Tops- BBK shorties, RAM clutch/flywheel, Bassani catted x pipe, MSD ignition, MAC cai, LMM lowering springs, adjustable skocks & struts, MGW short throw, DD

    Black 2009 Yamaha YZF-R6- custom levers, -1 front sprocket, Jardine GP-1 exhaust, HIDs, custom undertail, custom black windscreen.

  11. #11
    Senior Member 01cobra's Avatar
    Join Date
    Sep 2007
    Posts
    131
    I do have a mint H-pipe with the 4 cats & i do mean mint. Also the mass air with the bracket & a nice set of non rusted stock exhaust manifolds.

  12. #12
    SCS Founder Sonic03snake's Avatar
    Join Date
    Aug 2006
    Location
    Mt Pleasant, PA
    Posts
    4,905
    Quote Originally Posted by PaxtonShelby View Post
    Lou - $10 and those headers are yours. The garage is almost clean and I just want them gone. LMK.
    I picked up a set of clean 87 - 93 manifolds over the weekend.
    Lou
    Best non ported stock pullied eaton pass
    1.50 60ft 11.160@ 125.08

    New combo,
    Ported Eaton, upper/lower
    508 Hp 548 TQ SAE on an inferior Dynojet Dyno
    1.43 60 ft. 10.55 @ 130 MPH

    WFC 8 Mod Motor Winner
    06 NMRA Martin, Mi. Mod Muscle Winner

  13. #13
    SCS Founder Sonic03snake's Avatar
    Join Date
    Aug 2006
    Location
    Mt Pleasant, PA
    Posts
    4,905
    Quote Originally Posted by jaa55 View Post
    hey lou i have a near brand new set of flowmaster tail pipes, prob 1000 miles on them not stock but might be the right price for you!
    Thanks for the offer but I picked up a catback over the weekend.
    Lou
    Best non ported stock pullied eaton pass
    1.50 60ft 11.160@ 125.08

    New combo,
    Ported Eaton, upper/lower
    508 Hp 548 TQ SAE on an inferior Dynojet Dyno
    1.43 60 ft. 10.55 @ 130 MPH

    WFC 8 Mod Motor Winner
    06 NMRA Martin, Mi. Mod Muscle Winner

  14. #14
    SCS Founder Sonic03snake's Avatar
    Join Date
    Aug 2006
    Location
    Mt Pleasant, PA
    Posts
    4,905
    Quote Originally Posted by Shorty429 View Post
    You can have my cat back and headers if you wanted to work out a deal on an aftermarket catback...
    Thanks, already got one though.
    Lou
    Best non ported stock pullied eaton pass
    1.50 60ft 11.160@ 125.08

    New combo,
    Ported Eaton, upper/lower
    508 Hp 548 TQ SAE on an inferior Dynojet Dyno
    1.43 60 ft. 10.55 @ 130 MPH

    WFC 8 Mod Motor Winner
    06 NMRA Martin, Mi. Mod Muscle Winner

  15. #15
    No Traction due to Paxton PaxtonShelby's Avatar
    Join Date
    May 2007
    Location
    Moon Township
    Posts
    11,377
    Quote Originally Posted by Sonic03snake View Post
    I picked up a set of clean 87 - 93 manifolds over the weekend.
    No problem Lou. Glad you found the stuff you needed.
    2014 GT Premium - Sterling Gray Metallic - MT82 - Track Pack - Glass Roof - Recaro seats - Spoiler delete
    12.76 @ 114.04 bone stock. Koni yellow coil-overs, BMR watts, LCA and LCA relo brackets, Borla S-type axle back.

    1966 Coupe - 331 stroker - Bullet custom roller cam - cam and motor installed and dyno tuned by Rodeheavers Hot Rod - Astro A5 - McLeod RXT - 486 to the wheels - more fun than my little tires can handle

    1966 Oldsmobile Toronado - currently NOT on jackstands

  16. #16
    Rollin in my 5.0 Shorty429's Avatar
    Join Date
    Apr 2008
    Location
    Greensburg, PA
    Posts
    2,247
    Quote Originally Posted by Sonic03snake View Post
    Thanks, already got one though.
    It's all good. You wouldn't happen to have a catback laying around would you?

    Black
    1998 GT- PI swap, 3.73's, off road h pipe, flows & some suspension goodies

    White 1986 GT T-Tops- BBK shorties, RAM clutch/flywheel, Bassani catted x pipe, MSD ignition, MAC cai, LMM lowering springs, adjustable skocks & struts, MGW short throw, DD

    Black 2009 Yamaha YZF-R6- custom levers, -1 front sprocket, Jardine GP-1 exhaust, HIDs, custom undertail, custom black windscreen.

  17. #17
    SCS Founder Sonic03snake's Avatar
    Join Date
    Aug 2006
    Location
    Mt Pleasant, PA
    Posts
    4,905
    Quote Originally Posted by Shorty429 View Post
    It's all good. You wouldn't happen to have a catback laying around would you?
    None right now.
    Lou
    Best non ported stock pullied eaton pass
    1.50 60ft 11.160@ 125.08

    New combo,
    Ported Eaton, upper/lower
    508 Hp 548 TQ SAE on an inferior Dynojet Dyno
    1.43 60 ft. 10.55 @ 130 MPH

    WFC 8 Mod Motor Winner
    06 NMRA Martin, Mi. Mod Muscle Winner

Similar Threads

  1. Replies: 0
    Last Post: 04-13-2013, 02:36 PM
  2. Misc. '03/'04 cobra parts wanted
    By Killercanary in forum Ford Parts
    Replies: 6
    Last Post: 08-24-2009, 06:01 PM
  3. Engine and misc parts
    By Tony71502 in forum Ford Vehicles
    Replies: 0
    Last Post: 08-03-2009, 02:02 PM
  4. 1969 BBF Engine parts...& C6
    By somethingclever in forum Ford Vehicles
    Replies: 8
    Last Post: 01-29-2008, 01:55 PM
  5. FS: Misc. Fox Parts & Pontiac Wheels
    By TheGreatWhite in forum Ford Vehicles
    Replies: 20
    Last Post: 11-05-2007, 02:11 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •