do you think you can shift like this?

**yeahloh95** · 03-23-2011, 10:21 PM

here is how its done in a factory stock car running 10,40s
[ame="http://www.youtube.com/watch?v=x5YQ9WBbazg&feature=player_embedded"]YouTube - GOPR0005.MP4[/ame]

**biminiLX** · 03-23-2011, 10:44 PM

Troy aren't those face-plated or pro-shifted? Not taking anything away from him but I don't see a non-syncro'd trans and prepped clutch being difficult.
Also a good trick I came up with was using a right-handed rain golf glove. They are tacky if a little moisture, perfect for racing (would eliminate the towel routine he used).
-J

**Martin0660** · 03-23-2011, 10:51 PM

Originally Posted by biminiLX

Troy aren't those face-plated or pro-shifted?

I would say by the clunk when he downshifted while sitting, it's a non syncronized tranny ...

eh, you guys have seen me bang them, I'm not embarrased ;)

**biminiLX** · 03-23-2011, 11:09 PM

Yeah, I was typing while waiting for the vid to load, that definitely is Bob.
I miss doing some power-shifting in the T5/stock 302, never did that with the TKO 600/Turbo as the parts were on the limit as is :)
-J

**97LaserRed** · 03-23-2011, 11:15 PM

That the only way I shift mine!! lol Prob why I broke a few trannys in my day... and Im in my 20s lol

**speedracer** · 03-23-2011, 11:18 PM

I'm about that fast with the T56

**cam303** · 03-23-2011, 11:45 PM

Watch you guys dont pull something patting yourselves on the back!!! LOL

**ModularMike** · 03-24-2011, 01:38 AM

I can shift into Drive like a mofo.

**yeahloh95** · 03-24-2011, 08:01 AM

how about the clutch smoke coming out from under the hood on the launch

**speedracer** · 03-24-2011, 09:01 AM

Originally Posted by yeahloh95

how about the clutch smoke coming out from under the hood on the launch

He can keep that.

**Martin0660** · 03-24-2011, 09:10 AM

Originally Posted by yeahloh95

how about the clutch smoke coming out from under the hood on the launch

Was it clutch smoke, blowby from breathes, or left over from his burnout? I would suspect at that level they are using slipper clutches, at a minimum I would expect a metal friction material, so I'm not sure what would smoke?

**biminiLX** · 03-24-2011, 10:07 AM

Originally Posted by Martin0660

Was it clutch smoke, blowby from breathes, or left over from his burnout? I would suspect at that level they are using slipper clutches, at a minimum I would expect a metal friction material, so I'm not sure what would smoke?

Probably a combination of above.
Actually I believe that class still requires diaphragm clutches, at least they used to when I was working with ProMotion on my TKO600 issues.
-J

**TooFast98Cobra** · 03-24-2011, 10:14 AM

isn't this last years champ tommy G?

**TooFast98Cobra** · 03-24-2011, 10:20 AM

here is my boy ryan, NMRA PS champ few years back.

[ame="http://www.youtube.com/watch?v=bBHi4v8-Klo"]YouTube - Ryan Hecox 9.92 in car MIR Ford Fever 2009[/ame]

**sutyak** · 03-24-2011, 10:20 AM

Looks good, but the 3650 in my Mach 1 was that easy to power shift.

**Martin0660** · 03-24-2011, 01:03 PM

Originally Posted by biminiLX

Actually I believe that class still requires diaphragm clutches,

Aha, then it most certainly has to be sintered metal of some kind.

Originally Posted by sporadic

Looks good, but the 3650 in my Mach 1 was that easy to power shift.

At what RPM? I know I could never shift a T5 at those RPM like that (6800 ish), the lever simply does not want to move (no matter how hard you try to force it) :D

**TooFast98Cobra** · 03-24-2011, 01:12 PM

Originally Posted by Martin0660

Aha, then it most certainly has to be sintered metal of some kind.

At what RPM? I know I could never shift a T5 at those RPM like that (6800 ish), the lever simply does not want to move (no matter how hard you try to force it) :D

bob, Ryan above has three of those trans 4 sale he uses. two of them are fresh if you want one. takes alot to break it. he has some secret stuff done to it.

**ModularMike** · 03-24-2011, 01:40 PM

Some of my best work..

[ame="http://www.youtube.com/watch?v=vrf9IXQo1xo"]YouTube - Mustang GT vs. CAI SRT-8 Charger[/ame]

**sutyak** · 03-24-2011, 03:11 PM

Originally Posted by Martin0660

Aha, then it most certainly has to be sintered metal of some kind.

At what RPM? I know I could never shift a T5 at those RPM like that (6800 ish), the lever simply does not want to move (no matter how hard you try to force it) :D

6800ish actually.

Really though the 3650 was cake to powershift. It's like it was meant to be.
I had over 100 passes on the stock clutch and powershifted nearly every one.
It was torture going from a smooth direct shifter like that to a cable operated in a FWD.

Vid: http://video.google.com/videoplay?do...0013040114885#