Page 1 of 3 123 LastLast
Results 1 to 20 of 47

Thread: PRP or QCMP?

  1. #1
    "Mrs. Reklaw" reklaw's Avatar
    Join Date
    May 2009
    Location
    Chicora, PA
    Posts
    52

    PRP or QCMP?

    Anyone planning on going to PRP or Quaker City this Saturday, if the weather holds?

    03 Sonic Blue Cobra
    442 rwhp 466 lbs torque, 2.93 pulley, CAI, Street tires
    Conservative race tune
    12.31ET 113mph 1.79 60 ft

  2. #2
    Senior Member
    Join Date
    Jun 2010
    Location
    volant, pa 1 hour 10 minutes to summit
    Posts
    576
    my 10 yr old mustang lovin son and i will be at qcr!
    6.4 litre fox and its all ford

  3. #3
    Try'n for 12's shockstang's Avatar
    Join Date
    Oct 2009
    Location
    morgantown, wv
    Posts
    277
    I will be at PRP if the weather holds.
    No Burnout Bill

  4. #4
    "Mrs. Reklaw" reklaw's Avatar
    Join Date
    May 2009
    Location
    Chicora, PA
    Posts
    52
    We are planning on taking both the TA and the Cobra to PRP on Saturday.

    03 Sonic Blue Cobra
    442 rwhp 466 lbs torque, 2.93 pulley, CAI, Street tires
    Conservative race tune
    12.31ET 113mph 1.79 60 ft

  5. #5
    Senior Member Ares's Avatar
    Join Date
    Oct 2006
    Location
    Pittsburgh, PA
    Posts
    2,363
    Probably PRP. I'll wait till I hear how track surface is coming along at QCR before going.
    Ed...
    2012 Ram 2500 4x4, 5.7 Hemi, leveled, 35" tires
    2004 Mustang GT - Comp Orange/5speed Best 1/4 11.94@113.64, 1/8 7.59@89.48, 1.57 60' - Best 60' 1.51, just a NA 2v

  6. #6
    Under PSI Black Vert's Avatar
    Join Date
    May 2007
    Location
    Cranberry Twp.
    Posts
    344
    I'll be at PRP saturday testing out the new transbrake
    89 Vert, Stock block, H/C/I , DIY turbo kit MPT70 , Tweecer RT, C4 trans. 17 lbs boost. 3400#s - 10.3 @ 136 mph.

    Dyno Jet - 542 RWHP / 545 RWTQ

  7. #7
    More RPM !!! Martin0660's Avatar
    Join Date
    Aug 2006
    Location
    Greensburg, PA
    Posts
    8,058
    Quote Originally Posted by Ares View Post
    Probably PRP. I'll wait till I hear how track surface is coming along at QCR before going.
    Mat 29th at QCR for the UMTR race Ed

    Quote Originally Posted by Black Vert View Post
    I'll be at PRP saturday testing out the new transbrake
    oh my ... carnage and bad ass launches ... i assume you got a better converter in there now??

    I plan to be at PRP to watch if they get it in ... my junk is aways from ready to race.
    Bob Myers ©

    84 Capri RS Turbo -Best 1/8th - 6.24@109, Best 1/4 - 9.82@136...Still only a 4 banger

  8. #8
    Under PSI Black Vert's Avatar
    Join Date
    May 2007
    Location
    Cranberry Twp.
    Posts
    344
    Quote Originally Posted by Martin0660 View Post
    Mat 29th at QCR for the UMTR race Ed



    oh my ... carnage and bad ass launches ... i assume you got a better converter in there now??

    I plan to be at PRP to watch if they get it in ... my junk is aways from ready to race.
    Ah yes higher RPM launches with boost now . I can build 15psi on the tbrake and 2step now, I bought a Dirty Dog C4 race converter 4k stall, rated to 1000hp. Somethings gonna break but it better not be the converter.
    89 Vert, Stock block, H/C/I , DIY turbo kit MPT70 , Tweecer RT, C4 trans. 17 lbs boost. 3400#s - 10.3 @ 136 mph.

    Dyno Jet - 542 RWHP / 545 RWTQ

  9. #9
    Senior Member Quik83Z's Avatar
    Join Date
    Apr 2009
    Location
    North Hills
    Posts
    114
    PRP...for my two passes....

  10. #10
    More RPM !!! Martin0660's Avatar
    Join Date
    Aug 2006
    Location
    Greensburg, PA
    Posts
    8,058
    Quote Originally Posted by Black Vert View Post
    Somethings gonna break but it better not be the converter.
    I look forward to the clean up Hahah, I hope it busts off the numbers for you, launching on boost changes your life :D
    Bob Myers ©

    84 Capri RS Turbo -Best 1/8th - 6.24@109, Best 1/4 - 9.82@136...Still only a 4 banger

  11. #11
    GOT RUMBLE??? Balaska347's Avatar
    Join Date
    Jan 2007
    Location
    Belle Vernon
    Posts
    1,294
    PRP for me... I just haven't decide if I was going Saturday or Sunday yet.

    As far as I know, QCR isn't doing anything to the track surface this year.


    '89 Mustang GT
    '04.5 Duramax

    Jones Race Car Trailers
    www.jonesrv.com

  12. #12
    Formerly 2011 GB/CS & CST 03 03 OW SVT's Avatar
    Join Date
    Sep 2006
    Location
    Fuwkawee
    Posts
    5,151
    Might take a ride out to QCMP on the bike and check out what they've done so far since it's under new ownership.
    17 Ram 1500 Big Horn Hemi
    16 Comp O GT Performance Pack
    03 Oxford white Cobra (Gone but not forgotten)

  13. #13
    I will be at PRP, and hopefully weather holds fro Sunday too. Accuweather says yay, Weather.com says nay. I'm going with Accuweather. :D
    ChuckT
    Sponsored by
    Wholesale Transmission - New Kensington
    Millerstown Pic A Part

  14. #14
    More RPM !!! Martin0660's Avatar
    Join Date
    Aug 2006
    Location
    Greensburg, PA
    Posts
    8,058
    Quote Originally Posted by CobraII View Post
    I'm going with Accuweather. :D
    Always the optimist Chuck
    Bob Myers ©

    84 Capri RS Turbo -Best 1/8th - 6.24@109, Best 1/4 - 9.82@136...Still only a 4 banger

  15. #15
    never stock biminiLX's Avatar
    Join Date
    Jul 2007
    Location
    Beaver
    Posts
    2,406
    If my junk isn't on the dyno this Sat. in Ohio, I will come out to watch.
    -J
    '91 LX Bimini Blue
    427"/88mm on 16psi

    '99 Contour SVT
    Clean DD

  16. #16
    Senior Member RedCandyCoyote's Avatar
    Join Date
    Sep 2010
    Location
    Cheswick, PA
    Posts
    353
    i plan on going down to prp and racing for my first time ever, hopefully this exhaust shop gets their shit together and will work on mine before then...
    Tom
    2012 Mustang GT Premium Brembo package
    "just a stock car with an air intake"
    Best ET 12.24@114

  17. #17
    Senior Member Cam99's Avatar
    Join Date
    Aug 2006
    Location
    Melcroft
    Posts
    4,178
    weather permitting prp

  18. #18
    Senior Member Ares's Avatar
    Join Date
    Oct 2006
    Location
    Pittsburgh, PA
    Posts
    2,363
    Quote Originally Posted by Balaska347 View Post
    PRP for me... I just haven't decide if I was going Saturday or Sunday yet.

    As far as I know, QCR isn't doing anything to the track surface this year.
    I know the grinding/polishing is still up in the air and an issue with Pro-mod cars. I want to wait till I hear how it is after all the scrapping and prepping of entire track.
    Ed...
    2012 Ram 2500 4x4, 5.7 Hemi, leveled, 35" tires
    2004 Mustang GT - Comp Orange/5speed Best 1/4 11.94@113.64, 1/8 7.59@89.48, 1.57 60' - Best 60' 1.51, just a NA 2v

  19. #19
    "Mrs. Reklaw" reklaw's Avatar
    Join Date
    May 2009
    Location
    Chicora, PA
    Posts
    52
    Quote Originally Posted by Cam99 View Post
    weather permitting prp
    Bringing the Caddy?

    03 Sonic Blue Cobra
    442 rwhp 466 lbs torque, 2.93 pulley, CAI, Street tires
    Conservative race tune
    12.31ET 113mph 1.79 60 ft

  20. #20
    GOT RUMBLE??? Balaska347's Avatar
    Join Date
    Jan 2007
    Location
    Belle Vernon
    Posts
    1,294
    Quote Originally Posted by Ares View Post
    I know the grinding/polishing is still up in the air and an issue with Pro-mod cars. I want to wait till I hear how it is after all the scrapping and prepping of entire track.
    Good luck, Im not going till something is done with that track and scraping and prepping isn't going to fix anything. I hooked there , the problem is all the bumps and craters.


    '89 Mustang GT
    '04.5 Duramax

    Jones Race Car Trailers
    www.jonesrv.com

Similar Threads

  1. Prp 8/2
    By Cam99 in forum Drag Racing
    Replies: 13
    Last Post: 08-09-2012, 03:52 PM
  2. New best prp 10-22-11
    By stangr6man in forum S197
    Replies: 13
    Last Post: 10-24-2011, 04:07 PM
  3. May 29th - UMTR at QCR (QCMP)
    By Martin0660 in forum Drag Racing
    Replies: 16
    Last Post: 07-18-2011, 11:05 PM
  4. Prp 7/26/08
    By travj31 in forum Meets & Events
    Replies: 10
    Last Post: 07-28-2008, 03:02 PM
  5. Prp 9/27/06
    By 2000GT in forum The Bar
    Replies: 91
    Last Post: 09-30-2006, 02:30 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •