Will the GT-40 heads work as a derict replacement on a 5.0 fox?
I have seen that the GT=40p heads don't fit without some changes so I'm
not going to run them. Just need info on the GT-40
Thanks
Will the GT-40 heads work as a derict replacement on a 5.0 fox?
I have seen that the GT=40p heads don't fit without some changes so I'm
not going to run them. Just need info on the GT-40
Thanks
I put gt40 3 bar heads on no problem. p need different headers
Stock headers work with a little bending
all depende cuz i have gt40p heads. and i run a 1inch3/4 bbk longtube and ford racing wires and it clears just fine
I used ford racing headers, the newer ones are all supposed to work with GT40ps
03 Torch Red Anni. Ed. Cobra
11 Grabber Blue 5.0, 3D500 spoiler, CS valance, GT premium, interior upgrade package, Brembos, MT-82 and Whipple powered SOLD
01 cobra: traded
93 LX Modular 4v swap
Sean Hyland Motorsport forged rotating assembly, Teksid block, 01 cobra heads, cams and intake SOLD
You can also go with a set of 351W heads and use the standard headers. Just so happens I have a set in the classified section!
Most headers fit fine with P's. Some no-name long tubes fit fine on my truck with P's, just needed to use a couple 90's on some plugs.
2014 Mustang GT Stock and for sale
2014 M235i (wife's)
1964 Ford F-100
Posting Permissions
Reply With Quote
Bookmarks