Should I put subframe connecters on!

**01stanghoff** · 07-20-2011, 12:05 PM

I have a 01 stang gt.I have a supercharger cold air intake 4:10 gears and I just bought dot slicks M/T.Just wondering what u guy's think? Probably has a little more mods just dont know myself!

**Martin0660** · 07-20-2011, 12:13 PM

Yes! Subframes and re-enforcement for the torque boxes (both upper and lower) should have been stock, let alone for something making power. The Fox's are a little worse than the new edge cars, but basically the same.

**speedracer** · 07-20-2011, 12:21 PM

It's a very noticeable difference, get them welded too.

**2000GT** · 07-20-2011, 12:28 PM

X 3. Have Wolfpack weld them in for you. He does nice work.

**bgblockelcamino** · 07-20-2011, 12:29 PM

yes like stated mustangs should have come from factory with them

**01stanghoff** · 07-20-2011, 12:37 PM

Originally Posted by bgblockelcamino

yes like stated mustangs should have come from factory with them

LOL Funy ass picture!

**Terminated** · 07-20-2011, 12:43 PM

No reason not too! I'm sure any shop would know, but make sure they're installed either on a drive on lift or with the car lifted up by tires so they go onto chassis as the car sits on ground, not how a lift holds it.

**laz2447** · 07-20-2011, 01:16 PM

Yes + Steeda + Wolfpack = Win

**97LaserRed** · 07-20-2011, 01:57 PM

Originally Posted by laz2447

Yes + Steeda + Wolfpack = Win

That's what I did!

**Shorty429** · 07-20-2011, 03:19 PM

Yes x10. And LMM makes a good pair.

**torqueboxer** · 07-20-2011, 04:06 PM

The best 100$ mod for a fox!!!

**01stanghoff** · 07-20-2011, 05:50 PM

Thanks guys! But I have BBK GRIPPS?

**biminiLX** · 07-20-2011, 06:13 PM

Anything is better than nothing. I'm not familiar with the BBKs but I'm sure they're fine and if you can have them welded in, do that.
Like the guys said, make sure its on a drive on lift.
-J

**map22** · 07-20-2011, 06:29 PM

it can only benefit you, it helps stiffen your ride so body flex is to a minimum

**Ares** · 07-20-2011, 06:44 PM

Yep add them without thinking. Your car will thank you in the long run. If putting any track time/hard launchs to that car then at a minimum have lower and upper torque boxes welded up.