dyno...

[mkwood4]

I know someone on here got to know how much and were you can get a dyno run. I have a 91 foxbody and the 400hp thread made me think what my car has. i just put new bearings and oil pump in the bottom end have ford racing alum heads 64cc ford racing e303 cam and a bbk ssi intake. 373 gears in the rear and a 100 shot of nitrous. i dont think im close to 400. i dont even know a ball park of were im at. any ideas?? anyone have a the same kind of set up and got it dynoed?

[PaxtonShelby]

Mike at Wolfpack Speed on Campbells Run has a dyno - that's about as close to home as it gets.

[tylerstepp]

Mike it might be a little while away but Im thinking Dyno Day !!!

[cemnt guy]

this kinda sounds like the randy jacksons white fox on passtime that ran 8.70s,

[silvernotch]

I dont think mike messes with push rod cars anymore.

[Wolfpack Speed]

I dont think mike messes with push rod cars anymore.

The only thing we don't do with push rod cars is custom tuning

[BigMack2012Gt]

Here is a list/location of ones i can think of off the top of my head.

WolfPack Speed - Pittsburgh, PA - Dynojet
Jsdyno - Verona,pa - Awd Mustang Dyno
FjPerformance - Delmont,pa - Dynojet
Tpg Tuning - Wyotech blairsville,pa - Awd Dynojet
********** - McClellandtown Pa - Mustang Dyno
OstDyno - Portersville, PA - Mustang Dyno
Pittsburgh Performance - Clairton,pa - Dynojet

I have been to jsdyno, fjperformance, and pittsburgh performance. All were great places. I will say this. The dynos are more of a tool to show gains from mods than anything. In my experience Mustang dynos read lower than dynojets so if your going for bigger numbers go dynojet :)

[Dan B.]

There a little garage in Sarver that has a dyno also....I've been by it a lot for work but don't know the name.

Has anyone ever used the dyno at Wyotech?

[scott5]

I wouldnt mind using an awd to see wat the ss would do

[wick]

There a little garage in Sarver that has a dyno also....I've been by it a lot for work but don't know the name.

Has anyone ever used the dyno at Wyotech?

Yup, right on 228. Just past where you make the left at the intersection bu jacks ford dealership. Can't miss the huge sign and rubber on the street. I pass it every friday taking my son to lernerville.

[mkwood4]

hey thanks alot guys. i will look into it. i know it wont be big numbers but i just want to see where im at with what i did so far. i have a twin turbo kit for it and before i did that i wanted some starter numbers. i will update everyone when i get it done. thanks again!

[BigMack2012Gt]

I know a lot of Evo. Wrx. and sti guys that have used wyotech's dyno but thats about it. Nate from Slowboyracing is the tuner there. He now owns Tpg tuning. He tunes more out of JsDyno now i believe.

[mkwood4]

no ballpark prices to get it done? or does it change and should just start calling around

[SonofaBish]

I know a lot of Evo. Wrx. and sti guys that have used wyotech's dyno but thats about it. Nate from Slowboyracing is the tuner there. He now owns Tpg tuning. He tunes more out of JsDyno now i believe.

That is correct... Nate tuned my car at Wyotech back in 2007 or 2008, and now just tuned it again last week at J&S... J&S reads VERY low - they said 22% lower than a Dynojet - but Mustang dyno's are supposed to be better tuning tools... They said i was only the second car to break 600rwhp on the J&S dyno (a GT-R broke 700 recently) .. on one pull we were over 700rwhp at 4500rpms when he let out, but that was at 16psi, which is more than I want to run

[SonofaBish]

no ballpark prices to get it done? or does it change and should just start calling around

i think most places are going to charge around $100 per hour to tune your own car on their dyno... Wolfpack, for example, has a tuner that can come in, and i'm sure its some sort of package deal....

Also, if ur just getting power pulls, its usually something like $50 for 3 pulls or something - maybe a little more

[StreetLethal]

We charge 75.00 for four power pulls with a cool down between pulls.

[BigMack2012Gt]

That is correct... Nate tuned my car at Wyotech back in 2007 or 2008, and now just tuned it again last week at J&S... J&S reads VERY low - they said 22% lower than a Dynojet - but Mustang dyno's are supposed to be better tuning tools... They said i was only the second car to break 600rwhp on the J&S dyno (a GT-R broke 700 recently) .. on one pull we were over 700rwhp at 4500rpms when he let out, but that was at 16psi, which is more than I want to run

Haha ya it reads pretty low. That gtr had the 900hp kit on it i believe so that goes to show you how low that thing reads. It was definately a heartbreaker when i was on there as well.

Jsdyno:
[ame="http://www.youtube.com/watch?v=SuKX9KR8thM&list=UUo_qc30hh_8HvC9Y0rhMyDw& index=4&feature=plcp"]2012 Mustang Gt auto Dyno Run - YouTube[/ame]

We couldn't lock out 4th due to not having an sct so we just did it in third. Normal mustang dynos are around 320hp/300hp for stock 2012 5.0's. That thing read 306/293. I was at a dynojet two weeks later for a dyno day and put down 367/336.

FjPerformance.
[ame="http://www.youtube.com/watch?v=hMesjheYpPo&list=UUo_qc30hh_8HvC9Y0rhMyDw& index=1&feature=plcp"]2012 Mustang Gt auto Dyno - YouTube[/ame]



I can't wait to get some FI on this bad boy :)

[mkwood4]

hey thanks. thats pretty cheap.

[Hawkeye]

The only thing we don't do with push rod cars is custom tuning

Here is a list/location of ones i can think of off the top of my head.

WolfPack Speed - Pittsburgh, PA - Dynojet
Jsdyno - Verona,pa - Awd Mustang Dyno
FjPerformance - Delmont,pa - Dynojet
Tpg Tuning - Wyotech blairsville,pa - Awd Dynojet
********** - McClellandtown Pa - Mustang Dyno
OstDyno - Portersville, PA - Mustang Dyno
Pittsburgh Performance - Clairton,pa - Dynojet

I have been to jsdyno, fjperformance, and pittsburgh performance. All were great places. I will say this. The dynos are more of a tool to show gains from mods than anything. In my experience Mustang dynos read lower than dynojets so if your going for bigger numbers go dynojet :)

I need to get mine tuned as well.
I would prefer to take to Mike, but he doesn't tune carbs.
Who is the best CARB guy here and I want to stay as close to the east side of Pittsburgh as possible.
I know of the "uniontown guy", but I have heard some really bad stories of cars being not taken care of while they were down their. (just leave it at that, don't want to start sH*t on rumors)

Any good, and I mean GOOD carb guys out there? Could care less about the numbers, just want a safe A/F ratio.

[cemnt guy]

my brother in law took a carbed chevy to streetlethal last year after he rebuilt it because he just couldnt get it right. in his own words the car runs perfect now. now i only beat him by 4 car lengths