88 Hatch rolling chassis

**George C** · 04-04-2007, 09:19 PM

up for sale is my 88 LX 5.0 hatch rolling chassis. i have given up on this project and need funds to finish my truck. the car has the following mods done to it. this is the perfect car for someone that has a stout driveline and ready to drop it in a drag ready shell.
95% of the parts on thsi car have no miles on them

has a 6pt cage with 2 extra bars that tie into where the upper torque boxes are. it also has a bar connecting the rear shock towers together, the down bars tie into the rear shock towers as well. Domination did the cage and did a excellant job

it also has a steeda Anti roll bar, rebuilt 8.8 with 410s only about 3k in miles on the rear. FMS gears were used.
full lenght subframes, torque boxes fully welded, trans member is fully welded instead of the factory spot welds

has flaming river manual rack, race craft manual master cylinder, complete D&D tubular K member, steeda adjustable CC plates, lake wood 90/10 stuts with 140# springs,

for rear it has LMM platinum springs, energy spring isolators, lakewood 50/50 shocks, mac upper/lower CAs, walboro 255 pump

i have a full gray/black interior minus the carpet for it but its in the shed
also has the BBK white face guages with 140 mph conversion

car was converted over to MAF and is an auto car

it has a clean title and has 130k miles on odometer, had some body work done for minor dings. this car is straight as for being never hit hard. it was put on a frame machine almost 2yrs ago for the rad support to be squared up. there isnt any huge amounts of mud at all in the quarters like most stangs tend to see

majority of all the parts were bought new from Lou at LMM, i really need to finish my truck and i cant afford to keep this car around and not doing anything with it

it has a GT wing on it along with GT nose, i was going to do rest of the skirting but like i said i gave up on this project

also has a driveshaft loop but forget who exactly made it, has trickflow girdle on rear

http://new.photos.yahoo.com/ohsoquik...803688051439/1
http://new.photos.yahoo.com/ohsoquik...803688051752/3
http://new.photos.yahoo.com/ohsoquik...803688051935/4
http://new.photos.yahoo.com/ohsoquik...803688052105/5
http://new.photos.yahoo.com/ohsoquik...803688052492/7
http://new.photos.yahoo.com/ohsoquik...803688052637/8
http://new.photos.yahoo.com/ohsoquik...803688052856/9
http://new.photos.yahoo.com/ohsoquik...03688053027/10
http://new.photos.yahoo.com/ohsoquik...03688053846/14
http://new.photos.yahoo.com/ohsoquik...03688054053/15
http://new.photos.yahoo.com/ohsoquik...03688055774/23

i have well over 3k invested in this car not including the car itself

im asking 2500 obo :(

**gmkillr** · 04-04-2007, 11:44 PM

Im getting married in one month & cant be spending any extra money right now or id be all over this.

**George C** · 04-06-2007, 11:00 PM

bump

**George C** · 04-20-2007, 01:37 PM

bump i need to finish my truck

**low12lightning** · 04-22-2007, 01:22 PM

who did the cage?

**George C** · 04-22-2007, 02:28 PM

TJ read up top youll see. your homie did it..was his first stang cage

**George C** · 06-07-2007, 01:33 PM

bump.........

car is slightly less modded with lower price. for sale is a clean title 88 5.0 LX. it has a 6 point mildsteel cage done by domination. it has 2 additinonal bars tieing into the upper torque boxes. the upper and lower torque boxes were welded. it has a Steeda Hard core Anti roll bar installed. and full lenght subframes

this is a rollingchassis. has a stock 8.8 with 355s on it, stock control arms. it has stock K member and stock powersteering rack. will not have a motor or trans

$ 1000.00

for this price your getting a cage, subframes and anti roll bar and the shell for free

**Viper_ed** · 06-07-2007, 02:33 PM

You're really tempting me Quick!

I might have to see if I can free some cash up somewhere.....

**J-rod** · 06-07-2007, 02:41 PM

Originally Posted by Viper_ed

You're really tempting me Quick!

I might have to see if I can free some cash up somewhere.....

go buy it saturday and ill see ya there!

**Viper_ed** · 06-07-2007, 02:46 PM

Originally Posted by Jared

go buy it saturday and ill see ya there!

I'll be pouring concrete with luxurysportscar.

**J-rod** · 06-07-2007, 02:53 PM

Originally Posted by Viper_ed

I'll be pouring concrete with luxurysportscar.

your always busy when im in the area. lol

**George C** · 06-07-2007, 06:10 PM

Originally Posted by Viper_ed

You're really tempting me Quick!

I might have to see if I can free some cash up somewhere.....

well jsut let me know. i decided to take the goodies off it and put on the notch. since the notch needed a few upkeeps on it so why not put all the goods on it. kinda curious to see how far i can get this notch with its stock 174k motor. with nothing more then suspension

**b4xs** · 06-10-2007, 09:01 PM

I'm interested, please PM your #. Louie had me join just to buy this!

**George C** · 06-11-2007, 04:31 AM

pm sent

**George C** · 06-19-2007, 12:33 PM

bump

**Viper_ed** · 07-02-2007, 12:53 AM

Stopped and looked at this car tonight. All I can say is that if someone is looking for a great platform to start with to build yourself a nice Stang, this is the ticket!!!

Look no further!

**George C** · 07-02-2007, 12:58 AM

thanks ed

**Viper_ed** · 07-06-2007, 11:28 PM

Originally Posted by Viper_ed

Stopped and looked at this car tonight. All I can say is that if someone is looking for a great platform to start with to build yourself a nice Stang, this is the ticket!!!

Look no further!

Well, I guess since no one else wanted a great deal on a nice Stang, I decided to help Quik out and take it off his hands. Guess I'll have to make it run and go from there.