Okkkk ray looking good ! We gotta line em up again when it's nice out
Okkkk ray looking good ! We gotta line em up again when it's nice out
94 Supra 6speed | 714RWHP | SP74GTS | SP FUEL SYSTEM | E85 | MAP-ECU | tuned by ME | GREDDY SP1 | VOLK GT-C | HKS COILOVERS | 11.21 @ 139 |
2003 KB cobra - 564rwhp ( sold )
2015 Charger Hellcat
2.4" upper pulley, ID1300 injectors, BAP, E85 tune, Cat Delete Pipes, One Piece Drive Shaft, Diff Brace, 305/35/20 555R's for the street and 305/45/18 MT ET Street R's for the track. 9.97@142 Best ET
85 GT
Heads and Cam plus other bolt ons
73 F250
Lifted, 35's, 460 4spd
Real name = Ray
Weather sure has been nice, still dragging your feet?
--> Tony <--
2013 Audi S4
Says the guy who hasn't driven his mustang in a couple years
I have been dragging a little bit though. I was waiting for this to come in. It's the last main piece I need. I'm hoping to have it running at least by the end of next week. Going to have it tuned on 93 at ~17 PSI now then hopefully E85 at ~23 PSI shortly after.
2015 Charger Hellcat
2.4" upper pulley, ID1300 injectors, BAP, E85 tune, Cat Delete Pipes, One Piece Drive Shaft, Diff Brace, 305/35/20 555R's for the street and 305/45/18 MT ET Street R's for the track. 9.97@142 Best ET
85 GT
Heads and Cam plus other bolt ons
73 F250
Lifted, 35's, 460 4spd
Real name = Ray
Nice build Ray, I actually charged the batteries in my Z06 and GT last night so I can move them around and start to work on them. I have a ton to do on the mustang, I just hope to accomplish enough to have it running for Carlisle.
-Paul
1995 GT 'vert
Best times on old 302 combo:
12.03 at 112.5mph NA
Best time with 9:1 compression NA dart block 331 setup:
11.50 at 121mph
Dyno'd: 415rwhp/410rwtq
2004 Z16 commemorative edition Z06
100% stock: 11.9 at 118mph
2015 Charger Hellcat
2.4" upper pulley, ID1300 injectors, BAP, E85 tune, Cat Delete Pipes, One Piece Drive Shaft, Diff Brace, 305/35/20 555R's for the street and 305/45/18 MT ET Street R's for the track. 9.97@142 Best ET
85 GT
Heads and Cam plus other bolt ons
73 F250
Lifted, 35's, 460 4spd
Real name = Ray
I can't say that the turbo is going on for sure, but I will soon have the fuel system to support whatever power adder I wish to put on if any. There are too many other things that would also need to be changed before I could put any sort of power adder on it and I don't see me having the time or funds to do it this summer. The cam, gears, etc all would need changed.
-Paul
1995 GT 'vert
Best times on old 302 combo:
12.03 at 112.5mph NA
Best time with 9:1 compression NA dart block 331 setup:
11.50 at 121mph
Dyno'd: 415rwhp/410rwtq
2004 Z16 commemorative edition Z06
100% stock: 11.9 at 118mph
Made a little progress recently. Got the whipple bolted down, belt back on, all the vacuum hoses routed. Stopped working on the engine when I realized my throttle cables are now about an inch longer than they should be. Found a mod online for the throttle cable, but I'm not sure what to do about the cruise control cable. I guess I'll just hope it takes out it's own slack or something.
Also got the new wheels in today so I put on the fronts and painted the calipers. Still gotta get the rear tires mounted up before I can put those on. After that I just need to wire in the fuel pumps, put the tank back in, then get to work on the data logging/tuning.
2015 Charger Hellcat
2.4" upper pulley, ID1300 injectors, BAP, E85 tune, Cat Delete Pipes, One Piece Drive Shaft, Diff Brace, 305/35/20 555R's for the street and 305/45/18 MT ET Street R's for the track. 9.97@142 Best ET
85 GT
Heads and Cam plus other bolt ons
73 F250
Lifted, 35's, 460 4spd
Real name = Ray
Nice setup. And very nice cobra.
Almost ready for cruisin. Still have a little tuning left to do. Hopefully be able to hit the rollers in a week or two for WOT tuning on 93. Here's a little idle vid I made this afternoon. Still gotta get the rear tires mounted up on the new wheels.
http://www.youtube.com/watch?v=VcGdA...ature=youtu.be
2015 Charger Hellcat
2.4" upper pulley, ID1300 injectors, BAP, E85 tune, Cat Delete Pipes, One Piece Drive Shaft, Diff Brace, 305/35/20 555R's for the street and 305/45/18 MT ET Street R's for the track. 9.97@142 Best ET
85 GT
Heads and Cam plus other bolt ons
73 F250
Lifted, 35's, 460 4spd
Real name = Ray
Sounds great Ray. You going to run E85?
03 Cobra=slow show car...
13 F-150 Limited
Yeah, I'm eventually going to get it tuned on E85. Just not sure exactly when I'll get a chance to get it tuned on it. I bought a E85 tester so I need to run down to Sheetz and get a gallon or so to see what the percentage is this time of year. According to the monthly mixture charts for this area it's supposed to still be E70 until around July, but who knows what it'll actually be. I'd like to have it tuned on E85 before July, but we'll see how things go.
2015 Charger Hellcat
2.4" upper pulley, ID1300 injectors, BAP, E85 tune, Cat Delete Pipes, One Piece Drive Shaft, Diff Brace, 305/35/20 555R's for the street and 305/45/18 MT ET Street R's for the track. 9.97@142 Best ET
85 GT
Heads and Cam plus other bolt ons
73 F250
Lifted, 35's, 460 4spd
Real name = Ray
That sounds incredibly badass. Damn nice car you got yourself there. Gotta love those termi verts
1997 Mustang Gt
-Automagic
1957 Cadillac Coupe DeVille
If it aint broke, Dont fix it.
Yeah, I'm still not a huge vert fan either actually, but it's growing on me. The first time I can put the top down on a sunny day will probably win me over completely, lol.
I really love the sound. It's way better in person too
Yeah, I've been wanting black chrome FR500's for a few years. Finally got around to getting a set. Didn't imagine then that they'd be going on a silver vert though
2015 Charger Hellcat
2.4" upper pulley, ID1300 injectors, BAP, E85 tune, Cat Delete Pipes, One Piece Drive Shaft, Diff Brace, 305/35/20 555R's for the street and 305/45/18 MT ET Street R's for the track. 9.97@142 Best ET
85 GT
Heads and Cam plus other bolt ons
73 F250
Lifted, 35's, 460 4spd
Real name = Ray
Very very nice Ray
looking forward to hp and track results...sounds mean Ray.
-JOHN
Carburetors and SAE wrenches.................
Buy Made in the USA - It Matters.
Great work Ray love the car, great build, hopefully it hits its full potential!
How much did you end up getting for the black cobra i almost bought off of you?
Looks great, can't wait to see it in person.
-Barry
2003 Ford Mustang Dark Shadow Grey 4.6L GT
2004 Ford F-150 Super Crew Dark Shadow Grey 5.4L
Bookmarks