Selling my Corbeaus, changing to a fixed back seat this year so these need to go. They are in pretty good shape, just starting to show their age now is all. The main thing about them is they are both passenger side seats, but honestly it was never a problem for me. The only difference is the tilt lever is between the seat and the center console on the driver's seat. I never had a problem reaching it. The passenger's seat has a stock non-power seat track, and the driver's seat has 4 steel brackets I made to allow it to bolt up to a factory power set track. Both can bolt right up to factory non-power tracks.

anyway, here's the pics:





Small tear on back of driver's seat, near the center console:


Very slight fading near the windows, not noticeable in the car:


The foam in the driver's side is aging, slight wrinkles but still comfortable. The driver's seat could just be ran on the passenger's side, as the passenger's side foam is still really nice. Also the left leg bolster on the driver's seat is losing a little shape from getting in and out of the car


Here's the 1/4" steel adapter brackets I made for bolting to the power track, then a picture of how they attach to the power track:



Going to start out at $250 OBO, flexible on that price. I prefer pickup, but I can meet within a reasonable distance of Shaler Twp. if needed.