91-93 Fox with good front end

[Tony71502]

I need a parts car/roller with an intact front end. I need the front subframe rails to be in good condition. My car was hit and the mechanical portion still operates properly and even drives in a straight line, but the aprons/frame in front of the strut towers have been bent. I want a car I can cut apart and weld the required stuff into my car.

[mkwood4]

if your in the airport area i will be down the garage where my parts one is if you wanna come look at it.

[Tony71502]

That can work. I live in Bell Acres, right near Ambridge/Leet. PM me your number.

[PaxtonShelby]

Wow - sorry to hear about your car. What happened? I guess you're ok?

[fran]

I have a nice K-frame member for that car if interested.

[Tony71502]

I'm fine, thanks for asking. The passenger side fender got crunched up, but it was rusting to begin with (notice the hazy section above the wheel in my pic...rattle can clear coat...). After the accident I had to remove the fiberglass stock fan shroud because the rad support got smooshed a little... but the car was driveable. Drove it from Oakland(wonder why I was hit? lol.) back to where it is now in Bethel Park.

Like I said there are no mechanical problems, alignment is still perfect, it is just the frame rails in front of the strut towers are bent towards the passenger side. The bumper cover/fender are done for. Not hard to fix, it will be a summer project I guess.

I suppose since I'm ripping it apart to fix the front end, it's a good time to replace my full length Maximum Motorsport subframes with some Griggs through the floor subs.

Build thread will be starting shortly.... entire re-do... stripped down to bare body.

[Tony71502]

I have a nice K-frame member for that car if interested.

K is fine, but thanks.