Has anyone used or heard anything good about these following pieces? I'm considering getting them all unless they have a bad reputation.
Radiator Core support.
http://www.latemodelrestoration.com/...r-Core-Support
Aprons with no holes.
http://www.latemodelrestoration.com/...mooth-No-Holes
Frame repair kit. Correct me if I'm wrong, but I think this is for the engine bay.
http://www.latemodelrestoration.com/...oth-Frame-Rail
http://www.latemodelrestoration.com/...oth-Frame-Rail
1991 Jewel Green Ford Mustang LX ~ 5.0L / 5-Speed
2011 Torch Red Ford Ranger ~ 2.3L / 5-Speed
1971 White Chevrolet Chevelle Malibu w/ Blue Stripes ~ 8.2L(502) / 4-Speed
Yep those are for the front rails. Never heard anything bad about LMR.
Dan -- 2003 Cobra DSG Coupe #6009
If it looks good, you'll see it. If it sounds good, you'll hear it. If it's marketed right, you'll buy it. But if it's real, you'll feel it. IG: @donuttrump
After reading up on the parts included in the front rail kits, I guess I'll have to get sway bar mounts as well.
Any thoughts on the sway bar mount reinforcements? Worth doing while I'm at it?
1991 Jewel Green Ford Mustang LX ~ 5.0L / 5-Speed
2011 Torch Red Ford Ranger ~ 2.3L / 5-Speed
1971 White Chevrolet Chevelle Malibu w/ Blue Stripes ~ 8.2L(502) / 4-Speed
You're already doing a bit a metal work, why nto take care of it while you're in there ya know? Probably overkill, but that never hurt anything.
Dan -- 2003 Cobra DSG Coupe #6009
If it looks good, you'll see it. If it sounds good, you'll hear it. If it's marketed right, you'll buy it. But if it's real, you'll feel it. IG: @donuttrump
What year car is tbis stuff for?
Lou
Best non ported stock pullied eaton pass
1.50 60ft 11.160@ 125.08
New combo,
Ported Eaton, upper/lower
508 Hp 548 TQ SAE on an inferior Dynojet Dyno
1.43 60 ft. 10.55 @ 130 MPH
WFC 8 Mod Motor Winner
06 NMRA Martin, Mi. Mod Muscle Winner
91 LX. I got hit last summer and my front end needs some fixin'. Also going to have to get new fenders and bumper cover.
1991 Jewel Green Ford Mustang LX ~ 5.0L / 5-Speed
2011 Torch Red Ford Ranger ~ 2.3L / 5-Speed
1971 White Chevrolet Chevelle Malibu w/ Blue Stripes ~ 8.2L(502) / 4-Speed
I have a nice 90 front clip, you should come look at it.Originally Posted by Tony71502
Lou
Best non ported stock pullied eaton pass
1.50 60ft 11.160@ 125.08
New combo,
Ported Eaton, upper/lower
508 Hp 548 TQ SAE on an inferior Dynojet Dyno
1.43 60 ft. 10.55 @ 130 MPH
WFC 8 Mod Motor Winner
06 NMRA Martin, Mi. Mod Muscle Winner
Is it just the fender extensions that are different between 90 and 91 or is it the fender itself? I'd like to put the saleen kit on but from what I've seen that's just an addition to the LX bumper cover. I haven't seen any full covers.
1991 Jewel Green Ford Mustang LX ~ 5.0L / 5-Speed
2011 Torch Red Ford Ranger ~ 2.3L / 5-Speed
1971 White Chevrolet Chevelle Malibu w/ Blue Stripes ~ 8.2L(502) / 4-Speed
Im refering to the inner structure, I have a nice front frame structure from a 90.
Lou
Best non ported stock pullied eaton pass
1.50 60ft 11.160@ 125.08
New combo,
Ported Eaton, upper/lower
508 Hp 548 TQ SAE on an inferior Dynojet Dyno
1.43 60 ft. 10.55 @ 130 MPH
WFC 8 Mod Motor Winner
06 NMRA Martin, Mi. Mod Muscle Winner
You really should go look at what lou had at his shop. You would be MUCH better off with that. Its used yes, but the thickness and quality of the older steel is far superior yo what you can buy new. Its nothing to drill out a few spot welds and re-attach the stuff you get from.him. in the end, you will be much better off.
Rob
1 Monte SS. White.
Banned dates
11/27/08
4/25/11
3/28/12
12/1/12
There are more but that's all that was logged!!!
Posting Permissions
Reply With Quote
Bookmarks