Results 1 to 10 of 10

Thread: BBK can blow me !!!

  1. #1
    Right Wing Nut Dragger Troll's Avatar
    Join Date
    Aug 2006
    Posts
    5,822

    BBK can blow me !!!

    I got the throttle-body / plenum combo from Brenspeed. Good price, but I guess you get what you pay for. I didn't have this many problems with my Accufab and C&L set-up on the other car. Nothing major, just fitment BS. One especially got my goat... where the end of the throttle cable goes into the groove on the end of the spring, the hole in the BBK groove wasn't big enough. I had to take the damn thing off and drill it out about .00001mm to get it to fit. WTF?

  2. #2
    Senior Member scott5's Avatar
    Join Date
    Sep 2006
    Location
    NC
    Posts
    10,168
    yea i never heard anything good about bbk..

  3. #3
    far from a newb!!! INSANELY CRAZY's Avatar
    Join Date
    Aug 2006
    Location
    out in the woods
    Posts
    4,948
    my neighbor had to call bbk and get new clamps shipped to him for his cobra, ofcourse it was on a weekend so he had to wait till monday to get the right ones sent to him. the clamps they gave him were about 2" short...
    ridin fast,hittin da hills,throwin some dirt

    2003 polaris predator 500

    (wanna ride,just pm me!!!)

  4. #4
    Right Wing Nut Dragger Troll's Avatar
    Join Date
    Aug 2006
    Posts
    5,822
    It did wake the car up a little, though.
    2019 Colorado ZR2


  5. #5
    Senior Member Cam99's Avatar
    Join Date
    Aug 2006
    Location
    Melcroft
    Posts
    4,178
    Quote Originally Posted by Troll View Post
    It did wake the car up a little, though.
    I feel your pain. I installed a mac CAI on the 93 last night. OMFG.

  6. #6
    Going fast with class Slow01GT's Avatar
    Join Date
    Aug 2006
    Location
    Mars, PA
    Posts
    1,696
    never had a problem with my BBK tb. Now my BBK x-pipe is another story.
    Dennis
    2006 GTO
    Gone but not forgotten

    2015 SHO
    Mostly stock

    2014 Cruze
    Living the MPG life

  7. #7
    Right Wing Nut Dragger Troll's Avatar
    Join Date
    Aug 2006
    Posts
    5,822
    Quote Originally Posted by Cam99 View Post
    I feel your pain. I installed a mac CAI on the 93 last night. OMFG.
    check the engine pic in my other post, Cam. That fenderwell BBK cai is kinda like 1/2 fenderwell, 1/2 engine compartment. Kevin told me that if I could get that cover to fit on there and get that filter all the way in the fenderwell that I would be much more of a man than he is.

    Well well well... I tried and I don't see any way on God's green earth that 4ucking thing is going to fit. So, it's right where it was when I started. :D
    2019 Colorado ZR2


  8. #8
    Senior Member blkp42e's Avatar
    Join Date
    Oct 2006
    Location
    North Hills
    Posts
    1,229
    Ive never had a problem with BBK either

  9. #9
    Formerly 2011 GB/CS & CST 03 03 OW SVT's Avatar
    Join Date
    Sep 2006
    Location
    Fuwkawee
    Posts
    5,151
    Quote Originally Posted by Troll View Post
    check the engine pic in my other post, Cam. That fenderwell BBK cai is kinda like 1/2 fenderwell, 1/2 engine compartment. Kevin told me that if I could get that cover to fit on there and get that filter all the way in the fenderwell that I would be much more of a man than he is.

    Well well well... I tried and I don't see any way on God's green earth that 4ucking thing is going to fit. So, it's right where it was when I started. :D
    Thank goodness you didn't get it on...I guess my manhood is safe.
    17 Ram 1500 Big Horn Hemi
    16 Comp O GT Performance Pack
    03 Oxford white Cobra (Gone but not forgotten)

  10. #10
    Member RUSH2112's Avatar
    Join Date
    Aug 2006
    Location
    Hopewell, PA
    Posts
    754
    I never had a problem with BBK. My BBK cai fenderwell was pretty easy to install and when my header gaskets blew last year, BBK shipped new ones for FREE.
    Edelbrock Performer Heads, BBK Ceramic Long Tube Headers, BBK O/R H-Pipe, BBK Cold Air Intake, BBK Strut Tower Brace, Flowmaster American Thunder Cat-Back, FRPP King Cobra Clutch, FRPP 3.73 Gears, FRPP Chrome Cobra Upper/Lower Intake, FRPP Chrome Polished Valve Covers, Chrome Alternator, Ford B303 Cam, Holley Fuel Pressure Regulator, 70mm Edelbrock TB, 75mm Pro-M MAF, #24 Ford Injectors, Crane 1.7 Rockers

Similar Threads

  1. WANTED BBK long tubes + bbk short o/r h pipe
    By Black cobra in forum Ford Parts
    Replies: 0
    Last Post: 02-19-2011, 03:50 AM
  2. adj clutch cable,BBK quadrant,BBK firewall adj
    By 1badnotch in forum Ford Vehicles
    Replies: 3
    Last Post: 11-10-2010, 10:58 PM
  3. BBK Longtube headers and BBK h-pipe for 5.0
    By WickedJester in forum Ford Vehicles
    Replies: 3
    Last Post: 06-10-2008, 07:25 PM
  4. BBK X-Pipe BBK Headers
    By looselugnutz in forum Ford Vehicles
    Replies: 3
    Last Post: 08-27-2007, 05:30 PM
  5. blow through vam and blow off valve question
    By fast4ord in forum Fox-SN95
    Replies: 11
    Last Post: 03-16-2007, 07:45 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •