Results 1 to 18 of 18

Thread: ET Streets, Quick time Pro's, Slicks and wheel, Nitto's

  1. #1
    More RPM !!! Martin0660's Avatar
    Join Date
    Aug 2006
    Location
    Greensburg, PA
    Posts
    8,058

    ET Streets, Quick time Pro's, Slicks and wheel, Nitto's

    Likely a bad time of year to sell race tires, but I want to move out some race rubber ....

    I have a used set of ET Streets, 26-11.50-15. Still well above the wear bars $150.00. (These have the white letters removed).




    I also have a set of Hoosier 26-9.00-15 mounted on 15x8 - 5.5 BS Weld ProStars. these include race tubes and have 8 screws inside and outside. $350.00 for the complete set-up (wheels, tires, tubes, screwed and ready to bolt on). I should be able to include lug nuts for these if needed (closed end)



    I have a set of 27-11.50-15 Hoosier Quick Time Pro's. These have 7 passes on them and was broke in right. These are still currently mounted on my wheels but I can have them removed quickly. (these also have the white letters removed). $300.00 set. I can get pictures if needed.

    Last I have a set of 275/50/15 Nitto Drag radials. these are worn to the wear bars. I use them as street tires so never been raced. Good for someone wanting to try a set ot a mild car to use at the strip. These are also still mounted on another set of wheels but I can have them dismounted. I can also get pictures of these if needed (currently on the car in storage) Asking $60.00

    Let me know if more detail is needed on anything.
    Bob Myers ©

    84 Capri RS Turbo -Best 1/8th - 6.24@109, Best 1/4 - 9.82@136...Still only a 4 banger

  2. #2
    Ill take the nittos again. lol
    1969 Camaro restomod/project
    1967 camaro
    2011 mustang procharged
    93 reef blue notch blk/int
    92 calypso notch blk/int
    86 t-type
    1972 chevelle project
    Not only did I fail at building a fast mustang but I bought a yellow zo6 cause I couldn't get my little dick up.

  3. #3
    Senior Member Fast Gypsy's Avatar
    Join Date
    Jan 2011
    Location
    Allison Park, Pa.
    Posts
    365
    Different post question.What attachments did your wife buy for your GoPro to film your Capri drag passes.I'm looking to get one and any info would be appreciated. Thanks Vince
    1988 Mustang 408 W. All Motor New Best 5/5/18 10:15 @ 131 mph.
    1964 Chevy SS Convertible 327 300 HP.
    1964 Chevy SS Hardtop 327 250 HP. Sold 2017.
    1954 Ford Radical Custom Convertible.
    1991 GMC Sierra 1500-SLE 1/2 Ton Reg. Cab Short Bed.
    1930 Model A Sport Coupe Owned Since 1970 Sold 2016.

  4. #4
    More RPM !!! Martin0660's Avatar
    Join Date
    Aug 2006
    Location
    Greensburg, PA
    Posts
    8,058
    Lol Adam, they are yours when we can meet up, just give me a heads up so I can get them off the wheels.

    Vince - it is just the GoPro suction cup mount. She got mine at Target on a good deal. It comes with everything from the camera down in this picture.

    Bob Myers ©

    84 Capri RS Turbo -Best 1/8th - 6.24@109, Best 1/4 - 9.82@136...Still only a 4 banger

  5. #5
    joe THE BIG KOALA's Avatar
    Join Date
    Feb 2009
    Location
    Vandergrift
    Posts
    1,117
    I can't believe you are selling a set of your prostars.
    2019 Hellcat
    2015 Norwalk NMRA true street 13 second winner

  6. #6
    More RPM !!! Martin0660's Avatar
    Join Date
    Aug 2006
    Location
    Greensburg, PA
    Posts
    8,058
    Ha, there is a plan.

    Only selling this stuff to buy a set of 15x10's. I got something in the works ...
    Bob Myers ©

    84 Capri RS Turbo -Best 1/8th - 6.24@109, Best 1/4 - 9.82@136...Still only a 4 banger

  7. #7
    No Traction due to Paxton PaxtonShelby's Avatar
    Join Date
    May 2007
    Location
    Moon Township
    Posts
    11,377
    15x10...NICE!!!

    Hey Bob...look at what vanity plate is available...

    MORE RPM
    2014 GT Premium - Sterling Gray Metallic - MT82 - Track Pack - Glass Roof - Recaro seats - Spoiler delete
    12.76 @ 114.04 bone stock. Koni yellow coil-overs, BMR watts, LCA and LCA relo brackets, Borla S-type axle back.

    1966 Coupe - 331 stroker - Bullet custom roller cam - cam and motor installed and dyno tuned by Rodeheavers Hot Rod - Astro A5 - McLeod RXT - 486 to the wheels - more fun than my little tires can handle

    1966 Oldsmobile Toronado - currently NOT on jackstands

  8. #8
    ^^ LOL! Perfect for Bob! Jump on that before the new rates for personalized plates takes affect! :D
    ChuckT
    Sponsored by
    Wholesale Transmission - New Kensington
    Millerstown Pic A Part

  9. #9
    More RPM !!! Martin0660's Avatar
    Join Date
    Aug 2006
    Location
    Greensburg, PA
    Posts
    8,058
    Lol, I've already got a plate on mine ...



    someone buy my stuff so I can afford more stuff :)
    Bob Myers ©

    84 Capri RS Turbo -Best 1/8th - 6.24@109, Best 1/4 - 9.82@136...Still only a 4 banger

  10. #10
    More RPM !!! Martin0660's Avatar
    Join Date
    Aug 2006
    Location
    Greensburg, PA
    Posts
    8,058
    bump
    Bob Myers ©

    84 Capri RS Turbo -Best 1/8th - 6.24@109, Best 1/4 - 9.82@136...Still only a 4 banger

  11. #11
    Squiggles.......... Erics89GT's Avatar
    Join Date
    Aug 2010
    Location
    Greensburg, Pa
    Posts
    390
    Bob, do you have any rims you want to sell?
    Daily: 2007 Ford Fusion SE

    1991 LX 5.0 5speed- lowered, mach1 wheels, trickflow intake, boss inc style pro cowl hood, 3.73s

  12. #12
    More RPM !!! Martin0660's Avatar
    Join Date
    Aug 2006
    Location
    Greensburg, PA
    Posts
    8,058
    Just the two ProStars with slicks.
    Bob Myers ©

    84 Capri RS Turbo -Best 1/8th - 6.24@109, Best 1/4 - 9.82@136...Still only a 4 banger

  13. #13
    More RPM !!! Martin0660's Avatar
    Join Date
    Aug 2006
    Location
    Greensburg, PA
    Posts
    8,058
    Buy my stuff so I can buy more stuff. Let's keep the economy going ;)
    Bob Myers ©

    84 Capri RS Turbo -Best 1/8th - 6.24@109, Best 1/4 - 9.82@136...Still only a 4 banger

  14. #14
    Squiggles.......... Erics89GT's Avatar
    Join Date
    Aug 2010
    Location
    Greensburg, Pa
    Posts
    390
    i just need rims lol......
    Daily: 2007 Ford Fusion SE

    1991 LX 5.0 5speed- lowered, mach1 wheels, trickflow intake, boss inc style pro cowl hood, 3.73s

  15. #15
    More RPM !!! Martin0660's Avatar
    Join Date
    Aug 2006
    Location
    Greensburg, PA
    Posts
    8,058
    I'll make you a deal on a set of skinnies and 3 sets of 15x8's, lol
    Bob Myers ©

    84 Capri RS Turbo -Best 1/8th - 6.24@109, Best 1/4 - 9.82@136...Still only a 4 banger

  16. #16
    More RPM !!! Martin0660's Avatar
    Join Date
    Aug 2006
    Location
    Greensburg, PA
    Posts
    8,058
    Race season is just around the corner
    Bob Myers ©

    84 Capri RS Turbo -Best 1/8th - 6.24@109, Best 1/4 - 9.82@136...Still only a 4 banger

  17. #17
    More RPM !!! Martin0660's Avatar
    Join Date
    Aug 2006
    Location
    Greensburg, PA
    Posts
    8,058
    PRP opens next weekend, get some hook ;)

    Bob Myers ©

    84 Capri RS Turbo -Best 1/8th - 6.24@109, Best 1/4 - 9.82@136...Still only a 4 banger

  18. #18
    More RPM !!! Martin0660's Avatar
    Join Date
    Aug 2006
    Location
    Greensburg, PA
    Posts
    8,058
    26" ET Streets are gone, 27" QTP's are Gone, Nittos are spoken for...

    Basically all that's left are the 26-9 slicks on wheels. strangely enough, that's what I thought someone would jump on, lol
    Bob Myers ©

    84 Capri RS Turbo -Best 1/8th - 6.24@109, Best 1/4 - 9.82@136...Still only a 4 banger

Similar Threads

  1. Hoosier Quick time pro 27x11.5-15"
    By SUPRAGATES in forum Ford Vehicles
    Replies: 2
    Last Post: 05-16-2013, 01:21 AM
  2. 11.5" Quick time pro, bias DOT slick, what pressure?
    By 03SnakePlissken in forum Drag Racing
    Replies: 4
    Last Post: 06-29-2012, 08:18 AM
  3. 26-11.50-15 Hoosier Quick Time Pro's
    By Martin0660 in forum Ford Vehicles
    Replies: 10
    Last Post: 07-20-2011, 08:42 PM
  4. Hoosier Quick Time Pro's on Weld Wheels
    By mustang50lx in forum Ford Vehicles
    Replies: 5
    Last Post: 08-09-2009, 09:51 PM
  5. Hoosier Quick Time Pro's
    By Martin0660 in forum Ford Vehicles
    Replies: 0
    Last Post: 05-13-2007, 10:17 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •