What's the goals for this year?
Getting my coupe out again for the first time in two years.
What's the goals for this year?
Getting my coupe out again for the first time in two years.
1969 Camaro restomod/project
1967 camaro
2011 mustang procharged
93 reef blue notch blk/int
92 calypso notch blk/int
86 t-type
1972 chevelle project
Not only did I fail at building a fast mustang but I bought a yellow zo6 cause I couldn't get my little dick up.
Ughhh. Just left the cold garage
No way you worked on anything.Originally Posted by TooFast98Cobra
1969 Camaro restomod/project
1967 camaro
2011 mustang procharged
93 reef blue notch blk/int
92 calypso notch blk/int
86 t-type
1972 chevelle project
Not only did I fail at building a fast mustang but I bought a yellow zo6 cause I couldn't get my little dick up.
Got stuff ready to take to the paint booth. Lol
I'm hoping to have the new MGW Short Throw in, new clutch, longtubes installed and ready so I can take it and get it tuned and inspected! We'll see how that permits here soon!
JLT TRU CAI|ACCUFAB 70MM TB|PP PLENUM|MAGNAFLOW CATTED TRU-X|MAGNAFLOW PERFORMANCE EXHAUST
Not a lot for pictures this year. Rebuilding the rear with 9" ends, 35 spline axles, spool, 5/8" studs, then QA1 shocks and Team Z's new rear springs. Rear is at Bud's getting the ends on it now.
debating on swapping to Kirkeys when the rear is done. I guess it depends on how much money is left, lol
Well, the motorcycle is in a million pieces, haven't touched the Mustang since August. So no progress made at all.
-Barry
2003 Ford Mustang Dark Shadow Grey 4.6L GT
2004 Ford F-150 Super Crew Dark Shadow Grey 5.4L
Put a leveling kit on my F150 this weekend. Will post up some pics once I get the 35's mounted
2015 Charger Hellcat
2.4" upper pulley, ID1300 injectors, BAP, E85 tune, Cat Delete Pipes, One Piece Drive Shaft, Diff Brace, 305/35/20 555R's for the street and 305/45/18 MT ET Street R's for the track. 9.97@142 Best ET
85 GT
Heads and Cam plus other bolt ons
73 F250
Lifted, 35's, 460 4spd
Real name = Ray
I'm the guy with the heads. My computer skills are not the best. I'm not sure my reply was sent. If not, please reply or give me a call.
Vince 412-486-3814
1988 Mustang 408 W. All Motor New Best 5/5/18 10:15 @ 131 mph.
1964 Chevy SS Convertible 327 300 HP.
1964 Chevy SS Hardtop 327 250 HP. Sold 2017.
1954 Ford Radical Custom Convertible.
1991 GMC Sierra 1500-SLE 1/2 Ton Reg. Cab Short Bed.
1930 Model A Sport Coupe Owned Since 1970 Sold 2016.
Still got the f250 ray?
-JOHN
Carburetors and SAE wrenches.................
Buy Made in the USA - It Matters.
Yep, I still got it. I actually drove it to work today. I tried to get my 35's mounted up for my 150 last night at walmart but they said it's against their policy to put on tires that are more than two sizes bigger than stock. I was pretty pissed so I just took the wheels of the 150 and I'll take them in loose today at lunch. Hopefully I have better luck. On another note, the heat in the 250 isn't that great when it's 5 out and I'm doing 70 on the highway, lol.
2015 Charger Hellcat
2.4" upper pulley, ID1300 injectors, BAP, E85 tune, Cat Delete Pipes, One Piece Drive Shaft, Diff Brace, 305/35/20 555R's for the street and 305/45/18 MT ET Street R's for the track. 9.97@142 Best ET
85 GT
Heads and Cam plus other bolt ons
73 F250
Lifted, 35's, 460 4spd
Real name = Ray
Nice. :)Yep, I still got it. I actually drove it to work today. I tried to get my 35's mounted up for my 150 last night at walmart but they said it's against their policy to put on tires that are more than two sizes bigger than stock
-JOHN
Carburetors and SAE wrenches.................
Buy Made in the USA - It Matters.
Rebushed the entire car, all poly, 25 bushings in all, plus new rear subframe bolts,(dropped the rear out and did an eibach rear sway bar while it was down), mm caster/camber plates, full length connectors, rebuilt the rear and put in 3.73s, new pro 5.0 shifter, added a jlt ram air, plus a few odds/ends things, now its time to clean and buff/wax it, gotta love breakin a virgin 60k car
+++You Can See My Carbon Footprint From Space+++
1999 Electric Green Mustang Cobra
My junk all ran when it was parked before winter......so I just hope it runs when I get it out in the spring.
1985 Ranger--2WD, basic bolt-ons and tires, 11.92 @ 111mph.
1986 Ranger--2WD, 5.0/T5/8.8.
X2. That is whenever Spring decides to come around
Don't think I've opened my garage in a month haha.
Dan -- 2003 Cobra DSG Coupe #6009
If it looks good, you'll see it. If it sounds good, you'll hear it. If it's marketed right, you'll buy it. But if it's real, you'll feel it. IG: @donuttrump
Have done nothing to mine. Been sitting since mid Sept. Have so much that needs done.
Ed...
2012 Ram 2500 4x4, 5.7 Hemi, leveled, 35" tires
2004 Mustang GT - Comp Orange/5speed Best 1/4 11.94@113.64, 1/8 7.59@89.48, 1.57 60' - Best 60' 1.51, just a NA 2v
What's up with that??? You doing ok?
I had new/old tires mounted on the front, Under Drive Pulleys removed, new front ball joints, a Mcleod Super Street Pro Clutch kit installed with new clutch quadrant etc., fully built rear end with Moser axles/longer studs/31" Spline/new 4.10s, both clutch and rear end both good for upwards of 500+hp, switched from a Predator Diablo Sport Tuner to a SCT Tuner, tranny flushed and new fluids!! Now to put the break in miles on it, have it tuned and add some hp, ohh yeahhh!!!!!
Bu-2000-bash
ALLSQUAD
Steel City Muscle Cars
CarCruises
Flashlight Drags
NMRA
UMTR
Modded Mustangs
NHSCC
Any engine mods other than removing the UDP's? I need to get my clutch and MGW in this spring. I was hoping to install long-tubes, but not sure at this time if I can or not, unless I can find a cheap deal on some good used ones. Not looking to spend 700.00 on Stainless Works at the moment..
JLT TRU CAI|ACCUFAB 70MM TB|PP PLENUM|MAGNAFLOW CATTED TRU-X|MAGNAFLOW PERFORMANCE EXHAUST
Posting Permissions
Reply With Quote
Bookmarks