Page 3 of 3 FirstFirst 123
Results 41 to 57 of 57

Thread: Detailing thread

  1. #41
    Senior Member Cam99's Avatar
    Join Date
    Aug 2006
    Location
    Melcroft
    Posts
    4,178
    Quote Originally Posted by krupa35 View Post
    . What products do you guys run on your interior? (carpet, vinyl, leather, rubber, plastic, trim, glass?)
    curious on this as well

  2. #42
    Senior Member Monkeygrits's Avatar
    Join Date
    Jul 2011
    Location
    Meyersdale, PA
    Posts
    1,101
    Carpet wise I have our pet spot cleaner I use in the cars. It's just a mini carpet scrubber. Both of our daily drivers have husky liner floor mats so they only get dirt around the edges. I usually clean my dash with a damp microfiber towel and one of those trim brushes to get in the cracks. I stopped using armorall etc because it attracts dust. I use lexol cleaner and conditioner on the leather seats. Exterior black trim and tires etc. I use Optimum Optibond. Best stuff I've found by far. Autoality has it. It looks like armorall but it is dry to the touch. I use it under the hood and on the shaker as well. Not sure about inside though. Haven't tried it in there.

    http://www.autoality.com/store/pc/vi...&idcategory=59
    Last edited by Monkeygrits; 03-03-2014 at 07:45 PM.

  3. #43
    Senior Member
    Join Date
    Apr 2008
    Location
    Polar Vortex
    Posts
    6,031
    Quote Originally Posted by 95V6 View Post
    John4cam, when did you pick up the vette!?!?

    Barry. It arrived last Sunday. Two hours of rain that day and guess when the carrier showed up? lol. I took it out yesterday. Does great in the snow.

  4. #44
    I have bad luck. 95V6's Avatar
    Join Date
    Apr 2010
    Location
    South Hills
    Posts
    3,579
    Quote Originally Posted by John4cam View Post
    Barry. It arrived last Sunday. Two hours of rain that day and guess when the carrier showed up? lol. I took it out yesterday. Does great in the snow.
    That's awesome man. I'll keep an eye for it, there is a guy with a loud black (possibly matte black) cammed one that I see all the time in the summer. I love C5s, pop up head lights and all. Plans for it?
    -Barry
    2003 Ford Mustang Dark Shadow Grey 4.6L GT
    2004 Ford F-150 Super Crew Dark Shadow Grey 5.4L

  5. #45
    Senior Member
    Join Date
    Apr 2008
    Location
    Polar Vortex
    Posts
    6,031
    Quote Originally Posted by 95V6 View Post
    That's awesome man. I'll keep an eye for it, there is a guy with a loud black (possibly matte black) cammed one that I see all the time in the summer. I love C5s, pop up head lights and all. Plans for it?
    i'll send a pm.

  6. #46
    No Traction due to Paxton PaxtonShelby's Avatar
    Join Date
    May 2007
    Location
    Moon Township
    Posts
    11,377
    PM'ing the details?? WTF?!?!
    2014 GT Premium - Sterling Gray Metallic - MT82 - Track Pack - Glass Roof - Recaro seats - Spoiler delete
    12.76 @ 114.04 bone stock. Koni yellow coil-overs, BMR watts, LCA and LCA relo brackets, Borla S-type axle back.

    1966 Coupe - 331 stroker - Bullet custom roller cam - cam and motor installed and dyno tuned by Rodeheavers Hot Rod - Astro A5 - McLeod RXT - 486 to the wheels - more fun than my little tires can handle

    1966 Oldsmobile Toronado - currently NOT on jackstands

  7. #47
    Senior Member VaderGT's Avatar
    Join Date
    Jul 2010
    Location
    White Oak PA
    Posts
    292
    Quote Originally Posted by 95V6 View Post
    I've got to make my homage out to autoality when spring hits. One of my favorite sprays is the CG V7.
    Pickup a bottle of Sonax brilliant shine detailer and you will never look back. Stuff is so easy to use and the hydrophobic it gives rival coatings with beading and sheeting. it will last alot longer then V7 as well


    Forget about that CG clay block. I have one used it once and threw it away. it marrs the shit out of your paint.
    the speedy surface are so much better. I have both medium and fine in sponge form and they work better then the CG by miles and the fine grade removes alot and will leave very very minimal marring if any. the medium grade marrs less then the CG
    http://www.autoality.com/store/pc/Sp...m#.UxXShfldU3M
    http://www.autoality.com/store/pc/Sp...m#.UxXShfldU3M

    for interior
    I clean everything with Ultima interior shampoo gel..Carpets/leather/dash
    I protect carpet with 303 aerospace fabric guard
    and protect dash/plastics/leather with Ultima interior guard+

    for correction I have a Griots DA machine and a Rupes 15.
    I owned a flex in the past and hated it it was more of a chore to run because of the forced rotation will make it wanna walk on you if it gets any slight tilting. Also i found using my Griots and MF pads produced faster and better results then the Flex could. Since I got my Rupes I have been happy. Its so much easier to use with the large 15mm throw pretty much no downward pressure is needed and you can use it 1 handed and it glides over the paint. I can do a car faster because the larger throw corrects alot faster then the standard 8mm throws like on the Griots. I dont feel as tired after doing a car because all I am doing is directing the machine where to go I dont have to put any extra effort with applying pressure
    Last edited by VaderGT; 03-04-2014 at 09:42 AM.
    2016 Toyota Tacoma TRD Sport

  8. #48
    Senior Member Monkeygrits's Avatar
    Join Date
    Jul 2011
    Location
    Meyersdale, PA
    Posts
    1,101
    Here's a shot of my parents 2013 SHO. I used Menzerna Power Lock sealer on it last Summer. It is a amazing how this stuff held up over winter. It's actually dirty in the pic and sitting outside in the rain while I use the garage. Still beads like a mofo
    uploadfromtaptalk1397273944026.jpg
    Last edited by Monkeygrits; 04-12-2014 at 12:40 AM.

  9. #49
    Springin' It cLockWise's Avatar
    Join Date
    May 2012
    Location
    Gibsonia, PA
    Posts
    925
    What do you guys use to detail the engine bay?

    Sent from my SCH-I535 using Tapatalk


    JLT TRU CAI|ACCUFAB 70MM TB|PP PLENUM|MAGNAFLOW CATTED TRU-X|MAGNAFLOW PERFORMANCE EXHAUST

  10. #50
    I have bad luck. 95V6's Avatar
    Join Date
    Apr 2010
    Location
    South Hills
    Posts
    3,579
    I'll give it a shot Vader thanks.
    -Barry
    2003 Ford Mustang Dark Shadow Grey 4.6L GT
    2004 Ford F-150 Super Crew Dark Shadow Grey 5.4L

  11. #51
    Dudemanbrah krupa35's Avatar
    Join Date
    Feb 2014
    Location
    Beaver County
    Posts
    71
    Scrubble Bubbles on the engine :)


    Going to get my car washed, clayed, buffed, polished, waxed, and Xilon treatment next week all for free!!! Post results afterwards


    Puck Fennsylvania

  12. #52
    Senior Member White5.0's Avatar
    Join Date
    Oct 2006
    Location
    State College, PA
    Posts
    3,552
    Last weekend I washed, claybar'd, washed again, then applied wolfgang deep gloss paint sealant to my 2013. hot damn. touching the paint is like warm butter.
    2013 Mustang GT
    1987 Mustang GT
    1999 Contour SVT

  13. #53
    Dudemanbrah krupa35's Avatar
    Join Date
    Feb 2014
    Location
    Beaver County
    Posts
    71
    Hey my buddy just got some of that for his red Evo, that shit is like hydro-phobic


    Puck Fennsylvania

  14. #54
    Senior Member Monkeygrits's Avatar
    Join Date
    Jul 2011
    Location
    Meyersdale, PA
    Posts
    1,101
    Did a paint correction on my 13 focus DD. It has around 19k on it and has been through 2 winters. I Washed it with dawn and then got to using the mothers clay bar. I then used HD cut only with a medium polish pad hooked to my griots garage DA. I noticed the paint was virtually flawless after this step besides the random chips from being a DD. With the meguires 105 the paint would still have a nice haze to it at this step. HD cut is definitely better than meguires 105 in my book. Little to no dust, easy to wipe off and almost perfect finish. I could've went to the HD polish on a green polish pad after this but being my DD the car looked better than when it rolled off the lot. I wiped it down with a 50/50 isopropyl alcohol and water mix and topped it off with Menzerna Power Lock sealer. Amazing stuff. Here's the pics. HD products are awesome IMO.
    uploadfromtaptalk1400544289079.jpg
    uploadfromtaptalk1400544313614.jpg
    uploadfromtaptalk1400544344688.jpg

  15. #55
    I have bad luck. 95V6's Avatar
    Join Date
    Apr 2010
    Location
    South Hills
    Posts
    3,579
    Looks great, now do mine! lol
    -Barry
    2003 Ford Mustang Dark Shadow Grey 4.6L GT
    2004 Ford F-150 Super Crew Dark Shadow Grey 5.4L

  16. #56
    Senior Member Monkeygrits's Avatar
    Join Date
    Jul 2011
    Location
    Meyersdale, PA
    Posts
    1,101
    No thanks lol I still gotta do the Escape in front of it and the week before Carlisle the Mach 1 will get its spa treatment. Schedules full lol

  17. #57
    Will Work For Car Parts Terminated's Avatar
    Join Date
    Aug 2007
    Location
    Brookline
    Posts
    2,897
    Looks good, i need to get time to do my rides and wife's.
    Dan -- 2003 Cobra DSG Coupe #6009

    If it looks good, you'll see it. If it sounds good, you'll hear it. If it's marketed right, you'll buy it. But if it's real, you'll feel it. IG: @donuttrump


Similar Threads

  1. Interior detailing....how much??
    By Dan B. in forum The Bar
    Replies: 17
    Last Post: 06-03-2012, 09:26 PM
  2. Detailing Services
    By Wolfpack Speed in forum Wolfpack Speed
    Replies: 5
    Last Post: 05-12-2012, 01:44 PM
  3. More detailing
    By OCRnotch in forum Pictures & Videos
    Replies: 2
    Last Post: 03-27-2011, 12:20 AM
  4. Quality Detailing...
    By Wolfpack Speed in forum The Bar
    Replies: 6
    Last Post: 08-26-2010, 02:57 PM
  5. detailing forum?
    By crusher101 in forum Site Announcements, Discussion & Help
    Replies: 15
    Last Post: 04-18-2009, 01:47 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •