Page 1 of 13 12311 ... LastLast
Results 1 to 20 of 246

Thread: 1966 Coupe - time to upgrade!

  1. #1
    No Traction due to Paxton PaxtonShelby's Avatar
    Join Date
    May 2007
    Location
    Moon Township
    Posts
    11,377

    1966 Coupe - time to upgrade!

    Hi all. A few months ago I decided to pull the trigger and upgrade my '66 coupe a little.

    I bought the car in 1992, and after riding in a friend's '65 R-model clone with a roller 302 and a T-5, I spent the next 7 years resto-modding it to look like a Shelby T/A coupe, with a Shelby hood and side scoops, R-model front valance, and 16x8 Vintage 45 wheels with 225/50/16 BFGoodrich tires. In 1999 it was on the road, with a roller motor and T-5 from a 1985 GT, upgraded cam, TFS heads, 650 double pumper, long tubes, 9 inch Versailles rear with a 3:50 traction-lok, Granada front disks and Lincoln rear disks, and Global West suspension. The only original thing left besides the shell was the Ivy Green paint color. Life was good and I was grabbing gears and grinning ear to ear, all while out-handling just about anything on the road.

    I was content for a few years, and ran 13.6 at 101mph on street tires with 60-foot times in the 1.8-1.9 range. At the time, that wasn't too bad, and was faster than most stock sports cars. It caught quite a few Mustangs, Camaros, Trans Ams and Corvettes by surprise. Then, one month in Mustang Monthly, I saw an ad for a Paxton Novi 1200 supercharger for a carbed 289/302. Uh ohhhhh.

    So in 2002 or so I buy the Paxton. My buddy did the install and it ran 12.1 at 114 at Quaker City on Mickey Thompsons with a gentle 2900 rpm launch and granny shifting. 114 mph in a 40-year-old car feels faster than 140 in a new 5.0...by a long shot. Yep...that's all the power I'll ever need. Yup... Right...Sure...

    Ok - so I'm a liar. No - it didn't really "need" more upgrading, but since I'm old enough to be counting backwards I figured what the hell.

    To be continued...
    Last edited by PaxtonShelby; 05-04-2014 at 02:22 PM.
    2014 GT Premium - Sterling Gray Metallic - MT82 - Track Pack - Glass Roof - Recaro seats - Spoiler delete
    12.76 @ 114.04 bone stock. Koni yellow coil-overs, BMR watts, LCA and LCA relo brackets, Borla S-type axle back.

    1966 Coupe - 331 stroker - Bullet custom roller cam - cam and motor installed and dyno tuned by Rodeheavers Hot Rod - Astro A5 - McLeod RXT - 486 to the wheels - more fun than my little tires can handle

    1966 Oldsmobile Toronado - currently NOT on jackstands

  2. #2
    Senior Member
    Join Date
    Apr 2008
    Location
    Polar Vortex
    Posts
    6,031
    in for pics!

  3. #3

  4. #4
    Will Work For Car Parts Terminated's Avatar
    Join Date
    Aug 2007
    Location
    Brookline
    Posts
    2,897
    Such a nice ride, looking forward to updates!
    Dan -- 2003 Cobra DSG Coupe #6009

    If it looks good, you'll see it. If it sounds good, you'll hear it. If it's marketed right, you'll buy it. But if it's real, you'll feel it. IG: @donuttrump


  5. #5
    joe THE BIG KOALA's Avatar
    Join Date
    Feb 2009
    Location
    Vandergrift
    Posts
    1,117
    Can't wait to see some pics.
    2019 Hellcat
    2015 Norwalk NMRA true street 13 second winner

  6. #6
    No Traction due to Paxton PaxtonShelby's Avatar
    Join Date
    May 2007
    Location
    Moon Township
    Posts
    11,377
    Thanks Fellas - here are some photos. Many of you have seen it before, but here goes...
    Attached Images Attached Images
    Last edited by PaxtonShelby; 05-04-2014 at 03:05 AM.
    2014 GT Premium - Sterling Gray Metallic - MT82 - Track Pack - Glass Roof - Recaro seats - Spoiler delete
    12.76 @ 114.04 bone stock. Koni yellow coil-overs, BMR watts, LCA and LCA relo brackets, Borla S-type axle back.

    1966 Coupe - 331 stroker - Bullet custom roller cam - cam and motor installed and dyno tuned by Rodeheavers Hot Rod - Astro A5 - McLeod RXT - 486 to the wheels - more fun than my little tires can handle

    1966 Oldsmobile Toronado - currently NOT on jackstands

  7. #7
    joe THE BIG KOALA's Avatar
    Join Date
    Feb 2009
    Location
    Vandergrift
    Posts
    1,117
    Sweet!!!
    2019 Hellcat
    2015 Norwalk NMRA true street 13 second winner

  8. #8
    No Traction due to Paxton PaxtonShelby's Avatar
    Join Date
    May 2007
    Location
    Moon Township
    Posts
    11,377
    I had planned on building a 408 stroker and modding the Paxton brackets to fit. I know the 351 blocks fit in the first-gen Mustangs, but it is a tight fit. With the 302, I only have about 1/2 inch of hood clearance for the Paxton bonnet, and a 351 would probably need that plus a little more. Since I want to keep the Paxton, I sold the 351 block and picked up a sweet 331 stroker from Viper Ed. Thanks Ed! With zero miles on it - break-in time only - it is basically still in the wrapper. Zero balanced, forged everything, 8.5:1 with Canfield heads by FoxLake, and assembled by Ron Robart ( owner of FoxLake ). The block is a 1972? casting. Currently it has a hydraulic flat-tappet cam in it ( don't have the specs ), but I got a set of link-bar hydraulic roller lifters with the motor and I plan to switch to a hydraulic roller cam before the motor goes in.

    Speaking of which - here is the new beast. Hopefully this week I will get it scuffed and sprayed black.
    Attached Images Attached Images
    Last edited by PaxtonShelby; 05-04-2014 at 01:55 AM.
    2014 GT Premium - Sterling Gray Metallic - MT82 - Track Pack - Glass Roof - Recaro seats - Spoiler delete
    12.76 @ 114.04 bone stock. Koni yellow coil-overs, BMR watts, LCA and LCA relo brackets, Borla S-type axle back.

    1966 Coupe - 331 stroker - Bullet custom roller cam - cam and motor installed and dyno tuned by Rodeheavers Hot Rod - Astro A5 - McLeod RXT - 486 to the wheels - more fun than my little tires can handle

    1966 Oldsmobile Toronado - currently NOT on jackstands

  9. #9
    Senior Member
    Join Date
    Apr 2008
    Location
    Polar Vortex
    Posts
    6,031
    This is getting better...

  10. #10
    Hi! I'M DAKS #1 BITCH! TooFast98Cobra's Avatar
    Join Date
    Oct 2009
    Location
    South Hills, PA
    Posts
    4,052
    In for updates.

  11. #11
    No Traction due to Paxton PaxtonShelby's Avatar
    Join Date
    May 2007
    Location
    Moon Township
    Posts
    11,377
    Over the last few weeks I've been really busy, but managed to find a little time here and there to start the disassembly. Things came apart pretty easily, which was nice. Exhaust, driveshaft, radiator, Paxton, alternator...Today I finally had a few hours and dropped the T-5 and pulled the motor. The engine bay needs a good cleaning, but isn't too bad.
    Attached Images Attached Images
    2014 GT Premium - Sterling Gray Metallic - MT82 - Track Pack - Glass Roof - Recaro seats - Spoiler delete
    12.76 @ 114.04 bone stock. Koni yellow coil-overs, BMR watts, LCA and LCA relo brackets, Borla S-type axle back.

    1966 Coupe - 331 stroker - Bullet custom roller cam - cam and motor installed and dyno tuned by Rodeheavers Hot Rod - Astro A5 - McLeod RXT - 486 to the wheels - more fun than my little tires can handle

    1966 Oldsmobile Toronado - currently NOT on jackstands

  12. #12
    No Traction due to Paxton PaxtonShelby's Avatar
    Join Date
    May 2007
    Location
    Moon Township
    Posts
    11,377
    My God - stuff is everywhere! And all of it needs detailed or painted. At least the underside of the car just needs a quick wipe-down. I had a feeling things were going to snowball a bit, and it looks like I was right. Lots of work to be done.
    Attached Images Attached Images
    Last edited by PaxtonShelby; 05-04-2014 at 12:19 AM.
    2014 GT Premium - Sterling Gray Metallic - MT82 - Track Pack - Glass Roof - Recaro seats - Spoiler delete
    12.76 @ 114.04 bone stock. Koni yellow coil-overs, BMR watts, LCA and LCA relo brackets, Borla S-type axle back.

    1966 Coupe - 331 stroker - Bullet custom roller cam - cam and motor installed and dyno tuned by Rodeheavers Hot Rod - Astro A5 - McLeod RXT - 486 to the wheels - more fun than my little tires can handle

    1966 Oldsmobile Toronado - currently NOT on jackstands

  13. #13
    Member Mark Aubele's Avatar
    Join Date
    Mar 2007
    Location
    Trafford, Pa
    Posts
    2,308
    Please, for the sake of all that is holy, swap to a roller while you can. I will never deal with one of those cursed flat tappets as long as I live. :)
    2014 Mustang GT Stock and for sale
    2014 M235i (wife's)
    1964 Ford F-100

  14. #14
    No Traction due to Paxton PaxtonShelby's Avatar
    Join Date
    May 2007
    Location
    Moon Township
    Posts
    11,377
    I hear ya Mark. A roller is in the plans before the motor goes in - I just have to fit it in the budget. I also really need to get my hands on an Astro A-5 tranny and a blow proof bellhousing, but that will probably have to wait until next year unless I find a money tree in my backyard.
    2014 GT Premium - Sterling Gray Metallic - MT82 - Track Pack - Glass Roof - Recaro seats - Spoiler delete
    12.76 @ 114.04 bone stock. Koni yellow coil-overs, BMR watts, LCA and LCA relo brackets, Borla S-type axle back.

    1966 Coupe - 331 stroker - Bullet custom roller cam - cam and motor installed and dyno tuned by Rodeheavers Hot Rod - Astro A5 - McLeod RXT - 486 to the wheels - more fun than my little tires can handle

    1966 Oldsmobile Toronado - currently NOT on jackstands

  15. #15
    Springin' It cLockWise's Avatar
    Join Date
    May 2012
    Location
    Gibsonia, PA
    Posts
    925
    Beautiful car!


    JLT TRU CAI|ACCUFAB 70MM TB|PP PLENUM|MAGNAFLOW CATTED TRU-X|MAGNAFLOW PERFORMANCE EXHAUST

  16. #16
    No Traction due to Paxton PaxtonShelby's Avatar
    Join Date
    May 2007
    Location
    Moon Township
    Posts
    11,377
    Thanks Clock! I couldn't sleep, so tonight I started polishing the Paxton bonnet. It still needs some work, but at least it is coming along... Here is a before and after 20 minutes with Mothers Mag and Aluminum Polish and a Mothers Power Cone on my drill. This combo really works well. At some point I need to use it on my wheels, as they are a little dull at the moment.
    Attached Images Attached Images
    Last edited by PaxtonShelby; 05-04-2014 at 01:27 AM.
    2014 GT Premium - Sterling Gray Metallic - MT82 - Track Pack - Glass Roof - Recaro seats - Spoiler delete
    12.76 @ 114.04 bone stock. Koni yellow coil-overs, BMR watts, LCA and LCA relo brackets, Borla S-type axle back.

    1966 Coupe - 331 stroker - Bullet custom roller cam - cam and motor installed and dyno tuned by Rodeheavers Hot Rod - Astro A5 - McLeod RXT - 486 to the wheels - more fun than my little tires can handle

    1966 Oldsmobile Toronado - currently NOT on jackstands

  17. #17
    I have bad luck. 95V6's Avatar
    Join Date
    Apr 2010
    Location
    South Hills
    Posts
    3,579
    Gonna have it up and going for the PVGP?
    -Barry
    2003 Ford Mustang Dark Shadow Grey 4.6L GT
    2004 Ford F-150 Super Crew Dark Shadow Grey 5.4L

  18. #18
    No Traction due to Paxton PaxtonShelby's Avatar
    Join Date
    May 2007
    Location
    Moon Township
    Posts
    11,377
    I hope to Barry - but I don't know if I will have enough time. I took the '14 to the PVGP last year, so this year I hope it is the '66s turn!
    2014 GT Premium - Sterling Gray Metallic - MT82 - Track Pack - Glass Roof - Recaro seats - Spoiler delete
    12.76 @ 114.04 bone stock. Koni yellow coil-overs, BMR watts, LCA and LCA relo brackets, Borla S-type axle back.

    1966 Coupe - 331 stroker - Bullet custom roller cam - cam and motor installed and dyno tuned by Rodeheavers Hot Rod - Astro A5 - McLeod RXT - 486 to the wheels - more fun than my little tires can handle

    1966 Oldsmobile Toronado - currently NOT on jackstands

  19. #19
    Member Mark Aubele's Avatar
    Join Date
    Mar 2007
    Location
    Trafford, Pa
    Posts
    2,308
    A friend of mine may have an Astro setup for sale. He bought it for a race car build and the motor ended up getting out of hand rpm wise so he ended up going with a Jerico. Want me to ask if he will sell? Never even installed in a car.
    2014 Mustang GT Stock and for sale
    2014 M235i (wife's)
    1964 Ford F-100

  20. #20
    No Traction due to Paxton PaxtonShelby's Avatar
    Join Date
    May 2007
    Location
    Moon Township
    Posts
    11,377
    Hey thanks Mark! If you could PM me his contact info I'd definitely give him a call. Thanks for the info!
    2014 GT Premium - Sterling Gray Metallic - MT82 - Track Pack - Glass Roof - Recaro seats - Spoiler delete
    12.76 @ 114.04 bone stock. Koni yellow coil-overs, BMR watts, LCA and LCA relo brackets, Borla S-type axle back.

    1966 Coupe - 331 stroker - Bullet custom roller cam - cam and motor installed and dyno tuned by Rodeheavers Hot Rod - Astro A5 - McLeod RXT - 486 to the wheels - more fun than my little tires can handle

    1966 Oldsmobile Toronado - currently NOT on jackstands

Similar Threads

  1. 1966 Coupe on CL
    By PaxtonShelby in forum Ford Vehicles
    Replies: 0
    Last Post: 05-16-2014, 10:07 PM
  2. 1966 Mustang Coupe Seats - Perfect - $600
    By PaxtonShelby in forum Ford Vehicles
    Replies: 44
    Last Post: 06-27-2013, 01:29 PM
  3. 1966 Mustang coupe rear seat
    By PaxtonShelby in forum Ford Parts
    Replies: 4
    Last Post: 11-30-2011, 09:01 PM
  4. 1966 Restomod..
    By map351 in forum The Bar
    Replies: 1
    Last Post: 07-30-2009, 09:18 AM
  5. Replies: 7
    Last Post: 09-02-2008, 11:28 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •